Search results for: &#039;ethernet relay module&#039;

Similar matches

5V Single Channel Relay Module 10A

A versatile, compact relay board that can drive up to 10A @28VDC while only drawing approximately 60mA at 5V.

$3.95 AUD, inc GST

5V 4 Channel Relay Module 10A

A versatile relay board with opto-isolated inputs. Each channel can switch up to 10A @28VDC

$6.40 AUD, inc GST

5V 2 Channel Relay Module 10A

A versatile relay board with opt-isolated inputs. Each channel can drive up to 10A @28VDC

$5.70 AUD, inc GST

The Arduino Ethernet Shield 2 connects your Arduino board to the internet.

Arduino Ethernet Shield 2

Brand: Arduino

$51.15 AUD, inc GST

Relay Module V2 (Arduino Compatible)

The DFRobot Single Relay blocks the number of electronic modules. It can be used in interactive projects. It can also be used to control the lighting, electrical and other equipments. The modular design makes it easy to expand with the Arduino board (not included). The Relay output state by a light-emitting diode. It can be controlled through the digital IO port, such as solenoid valves, lamps, motors and other high current or high voltage devices.

$4.40 AUD, inc GST

Gravity: Digital Relay Module (Arduino and Raspberry Pi Compatible)

Introducing the Gravity Digital Relay Module – the latest addition to DFRobot’s Gravity series! This module is a little different to the other relays in our store...

$6.90 AUD, inc GST

Ethernet and PoE Shield for Arduino - W5500 Chipset

The W5500 Ethernet expansion board for Arduino integrates PoE power supply and W5500 Ethernet chip, which can meet the requirements of general IoT projects....

$50.35 AUD, inc GST

Industrial 8-Channel ESP32-S3 WiFi Relay Module (With POE)

Securely control inductive loads and execute complex automated logic directly from the edge. The Waveshare ESP32-S3-ETH-8DI-8RO-C integrates eight isolated 10A relays, an onboard CAN interface, and robust dual-core processing into a DIN-rail enclosure.

$84.25 AUD, inc GST

Power Over Ethernet HAT (G) For Raspberry Pi 5 (5V, 5A)

The PoE HAT (G) is an IEEE 802.3af/at-compliant PoE (Power Over Ethernet) HAT for Raspberry Pi 5. By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.

$26.40 AUD, inc GST

Industrial 6-Channel ESP32-S3 WiFi Relay Module

Industrial 6-Channel ESP32-S3 WiFi Relay Module, Supports WiFi / Bluetooth / RS485 control, Onboard RS485 / Pico HAT interfaces, With Multiple Isolation...

$52.30 AUD, inc GST

3 Channel Relay Module Shield Smart Home for Raspberry Pi

Perfect for simple home-automation projects, this module allows your Raspberry Pi to control three independent relays, allowing you to easily control high-current loads while keeping your Pi safely isolated. All the necessary driver circuitry is on-board, and control is as simple as driving a GPIO pin high or low

$26.10 AUD, inc GST

Rail-Mount Serial Server RS232/485/422 to RJ45 Ethernet Module

Rail-Mount Serial Server, RS232/485/422 to RJ45 Ethernet Module, TCP/IP to serial, With POE Function...

$44.10 AUD, inc GST

Industrial serial server, RS485 to RJ45 Ethernet, TCP/IP to serial(with POE function)

Industrial serial server, RS485 to RJ45 Ethernet, TCP/IP to serial, rail-mount support, with POE function(optional) | RS485 TO ETH (B)...

$38.50 AUD, inc GST

Power Over Ethernet HAT (F) For Raspberry Pi 5

Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard...

$35.30 AUD, inc GST

W5100 Ethernet + SD Card Shield (Arduino Compatible)

The Ethernet Shield for Arduino is based on the Wiznet W5100 and connects your Arduino-compatible board to the internet a few minutes. Simply plug this module onto board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet.

$9.15 AUD, inc GST

Raspberry Pi 8-Channel Relay Board

Add 8 easy to use relays to your Raspberry Pi

$38.35 AUD, inc GST

Waveshare Power over Ethernet HAT (D) (Pi 3B+/4B)

Power Over Ethernet HAT (Type D) For Raspberry Pi 3B+/4B, 802.3af-Compliant, Tailored For Raspberry Pi Official Case.

$28.05 AUD, inc GST

Modbus RTU 32-Ch Relay Module

Modbus RTU 32-Ch Relay Module, RS485 Interface, With Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case

$119.95 AUD, inc GST

Industrial Modbus RTU 8-ch Relay Module (D)

Industrial Modbus RTU 8-ch Relay Module (D) With Digital Input and RS485 Interface, Multi Isolation Protection Circuits, 7~36V Power Supply...

$61.80 AUD, inc GST

Industrial Modbus RTU 8-ch Relay Module with RS485 Interface

Industrial Modbus RTU 8-ch Relay Module with RS485 Interface, Multi Isolation Protection Circuits, 5V Power Supply...

$53.40 AUD, inc GST

Industrial 8-Channel Relay Module for Raspberry Pi Pico

Industrial 8-Channel Relay Module For Raspberry Pi Pico, Power Supply Isolation, Photocoupler Isolation...

$33.35 AUD, inc GST

4 Channel Solid State Relay Module (DC Control, AC Load)

This breakout module gives you access to a 4 channel solid state relay that can be switched with 3-5VDC

$15.35 AUD, inc GST

1 Channel Solid State Relay Module (DC Control, AC Load)

This breakout module gives you access to a single channel solid state relay that can be switched with 3-5VDC

$4.70 AUD, inc GST

This kit has all the parts needed to connect to the Ethernet port on Teensy 4.1...

Ethernet Kit for Teensy 4.1

Brand: Teensy

$16.10 AUD, inc GST

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 12 V relay, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relay is an Omron G5LE-14-DC12 and is rated for up to 10 A under most conditions.

Pololu Basic SPDT Relay Carrier with 12VDC Relay (Assembled)

Brand: Pololu

$14.70 AUD, inc GST

TTL UART to Ethernet Mini Module

TTL UART to Ethernet Mini Module, Castellated Holes With Immersion Gold Design, Highly Integrated Packaging...

$19.95 AUD, inc GST

ENC28J60 Ethernet LAN Network Module

Microchip ENC28J60 controller with SPI interface ready to prototype with.

$8.55 AUD, inc GST

2-Ch RS485 to RJ45 Ethernet Serial Server

2-Ch RS485 to RJ45 Ethernet Serial Server, Dual channels RS485 independent operation, Dual Ethernet Ports, Rail-mount Industrial Isolated Serial Module,...

$59.95 AUD, inc GST

WisBlock Relay Module RAK13007

Brand: RAKwireless

Single-channel WisBlock relay switches up to 250 VAC/10 A for control of motors, lights and conveyors in IoT projects.

$12.65 AUD, inc GST

Rail-Mount Serial Server, RS232/485/422 to RJ45 Ethernet Module(Without POE)

Rail-Mount Serial Server, RS232/485/422 to RJ45 Ethernet Module, TCP/IP to serial, POE Function Optional...

$40.50 AUD, inc GST

2 Channel Solid State Relay Module (DC Control, AC Load)

This breakout module gives you access to a 2 channel solid state relay that can be switched with 3-5VDC

$5.40 AUD, inc GST

8 Channel Solid State Relay Module (DC Control, AC Loads)

This breakout module gives you access to a 8 channel solid state relay that can be switched with 3-5VDC

$26.75 AUD, inc GST

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 5 V relay, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relay is an Omron G5LE-14-DC5 and is rated for up to 10 A under most conditions.

Pololu Basic SPDT Relay Carrier with 5VDC Relay (Assembled)

Brand: Pololu

$14.40 AUD, inc GST

The Pololu basic 2-channel relay carrier modules allow simple, independent control of two single-pole, double-throw (SPDT) switches from low-voltage, low-current control signals. This item includes the basic carrier PCB with two soldered-in 5 V relays, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relays are Omron G5LE-14-DC5 and are rated for up to 10 A under most conditions.

Pololu Basic 2-Channel SPDT Relay Carrier with 5VDC Relays (Assembled)

Brand: Pololu

$27.40 AUD, inc GST

Power over Ethernet HAT (E) for Raspberry Pi 3B+/4B, 802.3af-compliant

Power over Ethernet HAT (E) for Raspberry Pi 3B+/4B, 802.3af-compliant...

$24.80 AUD, inc GST

WisBlock Ethernet Module WIZnet W5100S-L RAK13800

Brand: RAKwireless

Extend WisBlock with 10/100 Base-T Ethernet via SPI using WIZnet W5100S, featuring PoE headers, Wake-on-LAN, power-down modes and auto-MDIX negotiation.

$15.10 AUD, inc GST

Industrial 4-Channel Relay Module

The module adopts the standard Modbus RTU protocol, the communication interface supports RS485 or RS232 and supports communication baud rates of 2400, 4800, 9600...

$53.60 AUD, inc GST