Digital RGB LED Strip 120 LED-White

Rating:
100% of 100
SKU: FIT0613 Brand: DFRobot
If you are going to make something dazzling and colorful, then you have come to the right place. Now, DFRobot is launching this Digital RGB LED Strip. This WS2812...
$20.60 AUD, inc GST
$18.73 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Tue, 15th of Sep

Quantity Discounts:

  • 6+ $17.79 (exc GST)
  • 12+ $17.05 (exc GST)

4 from local stock, supplier stock; your order will dispatch . And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

If you are going to make something dazzling and colourful, then you have come to the right place. Now, DFRobot is launching this Digital RGB LED Strip.

This WS2812 RGB LED strip is composed of a series of colourful LEDs. All of the LEDs can be controlled by us with just one signal line. Each LED is an individual pixel point that consists of the three primary colours: red, green and blue. It is able to achieve 256-level brightness display and 16777216 full colour display. Meanwhile, we set an intelligent digital port data latch and signal reshaping amplification drive circuit inside the LED, greatly ensuring the consistency of pixel point light colour.

With good flexibility, this strip of pure colour can be arbitrarily bent or cut off. The adhesive tape on the back of the LED strip allows it to be fixed anywhere. Power it up, and you will be in a magical and colourful world in seconds. They can be used in home decoration, festival interactive activity, intelligent LED, shining DIY device, and so on.

Specification

  • Input Voltage: 5V
  • Power Factor: 20
  • Beam Angle: 120°
  • LED Quantity: 120
  • Width: 10MM
  • Length: 2M

Parts List

  • WS2812 RGB LED Strip 120 LED-White   x1

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

Control Multiple Fully-Addressable WS2812B RGB LED Strips with a Raspberry Pi Single Board Computer

This is an update to an older guide done so that we can provide you with the fastest, most modern, ...
#led blink #neopixel #addressable #ws2812 #ws2812b #leds #glowbit
This is an update to an older guide done so that we can provide you with the fastest, most modern, ...
#led blink #neopixel #addressable #ws2812 #ws2812b #leds #glowbit

WLED Phone App | Control Addressable LEDs with an ESP32 or ESP8266

Today will be all about controlling Fully Addressable LED Lights using any Espressif ESP32 Dev...
#led #neopixel #esp32 #esp8266 #addressable #ws2812b #leds #glowbit
Today will be all about controlling Fully Addressable LED Lights using any Espressif ESP32 Dev...
#led #neopixel #esp32 #esp8266 #addressable #ws2812b #leds #glowbit

Setting Up Hyperbian – Ambient Lighting with your Screen

Break your television and monitors free from the confines of their edges with Hyperbian! This is an ...
#led #ws2812b #ambilight #hyperbian #hyperion #lighting
Break your television and monitors free from the confines of their edges with Hyperbian! This is an ...
#led #ws2812b #ambilight #hyperbian #hyperion #lighting

How to use WS2812B RGB LEDs with Raspberry Pi Pico

In this tutorial, we'll get some WS2812B LEDs (also known as GlowBits and NeoPixels) working with a ...
#raspberry pi #neopixel #ws2812 #glowbit #rainbow #pico
In this tutorial, we'll get some WS2812B LEDs (also known as GlowBits and NeoPixels) working with a ...
#raspberry pi #neopixel #ws2812 #glowbit #rainbow #pico

Projects

Hogwarts Lights

Although there are commercially available lighting kits for Lego models, we found those that are ava...
#led #rgb #light #diy #sculpture
Although there are commercially available lighting kits for Lego models, we found those that are ava...
#led #rgb #light #diy #sculpture

HUGE LED Pixel Panel

I’ve always been fascinated by LED screens and seeing beautiful colours mix and merge to creat...
#raspberry pi #display #led #dotstar #screen #matrix #pixel #panel #snake #vu #apa102
I’ve always been fascinated by LED screens and seeing beautiful colours mix and merge to creat...
#raspberry pi #display #led #dotstar #screen #matrix #pixel #panel #snake #vu #apa102

Time lapsing in OctoPrint (Properly!)

Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosur...
#camera #3d printing #octopi #pi #timelapse #led strips
Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosur...
#camera #3d printing #octopi #pi #timelapse #led strips
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.