empowering creative people

Components & Parts > LEDs

5M RGB LED Strip - WS2812 30 Per Meter - Black Strip - Weatherproof

SKU: CE04856

$49.00 AUD, inc GST
$44.55 AUD, exc GST
5M RGB LED Strip - WS2812 30 Per Meter - Black Strip - Weatherproof
49 AUD

SKU: CE04856

$49.00 AUD, inc GST
$44.55 AUD, exc GST
In stock, ships today if ordered before 2PM
Delivered by Thu, 21st of Sep

This 5-metre roll has 30 LEDs per metre on a black coloured strip.

This is a roll of addressable (WS2812) RGB LEDs. Each LED has a built-in controller chip which allows you to daisy-chain the LEDs and control them individually - all from a single GPIO! The constant-current driver in each LED ensures that colour remains consistent, even if supply-voltage varies slightly from the optimal 5V. The LEDs are factory-calibrated to ensure you have consistent colours all the way along your strip.
The strip is weather-sealed in a flexible plastic jacket (easily removed, if desired) and terminated at each end with a 3-pin plug, and two additional power leads if high current is required.

Long strips can require a lot of current! Make sure you're using a power supply that is capable of running your project. We've listed the maximum current that these LEDs consume (full-brightness white) but for a typical, colourful display the current required is usually a lot lower. If you decide to go with a smaller power supply, experiment with the length of strip you need to find out its true current requirements. If you're unsure, we have a high-current supply available.

Pinout

  • Red: 5V
  • Green: Data
  • White: Ground

Tech Specs

  • LED: WS2812
  • Supply voltage: 5V DC
  • Logic level: 5V (often accepts 3.3V)
  • Current requirement: ~1.1 A/metre (Full-brightness white)

This product is listed in:

Documentation and Resources:
  • Infinity-Mirror Table
  • An infinity mirror creates a striking optical illusion - a tunnel of light that seems to tear through space. I built this infinity-mirror table using some addressable LEDs, a Particle Photon and easily obtainable timber supplies. Check out the video to see the table in action! If you have any questions about building your own Infinity-Mirror Table then jump down to the comments section at the bottom of this page. If you have an...
  • Time lapsing in OctoPrint (Properly!)
  • Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosure, I'm just about ready to turn on some serious 3D printing work. But before I dive into that endless pool of fun, it's a good time to take 5 minutes and set up our Taz 6 and it's OctoPrint Server with a bed-mounted camera and light system. That way I can monitor my prints from the other side of the warehouse using OctoPrint, and m...

Product Comments

We deliver Australia-wide with these options:

  • $3 for Small Items (4-6 days, not tracked, only available on selected small items)
  • $6.95 for Standard Post (2-4 days, tracked)
  • $8.32 for Express Post (1-2 days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11.49 for Pack and Track (3+ days, tracked)
  • $16.50 for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount might increment based on the weight of your order.

Our physical address:

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Please checkout our customer service page if you have other frequently asked questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.