NeoPixel Nano 2020 RGB LEDs - 10-pack - WS2812B

SKU: ADA4684 Brand: Adafruit
These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They are just mind-bogglingly small - 2mm square. As they are pretty darn tiny, they might be a bit difficult to hand solder. SMT techniques with solder paste and hot air will work best here.
$8.20 AUD, inc GST
$7.45 AUD, exc GST

Available with a lead time
Expect dispatch between Jul 23 and Jul 26

Quantity Discounts:

  • 10-25 $7.15 (exc GST)
  • 25+ $6.94 (exc GST)
- +

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • $10+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They are just mind-bogglingly small - 2mm square. As they are pretty darn tiny, they might be a bit difficult to hand solder. SMT techniques with solder paste and hot air will work best here.

These Nano (2mm x 2mm) RGB LEDs are one third the size of mini 3535-sized NeoPixels and a sixth of the size of standard 5050mm NeoPixels you may be used to seeing. They're the most compact way possible to integrate multiple bright LEDs to a design. The driver chip is inside the LED and has ~12mA constant current drive, so the color will be very consistent even if the voltage varies, and no external choke resistors are required making your design minimal. Power the whole thing with 5VDC, and you're ready to rock.

There are three LEDs inside, red green and blue. The RGB LEDs are controlled by a tiny chip that takes a 24-bit color level via the clock and data in and then does all the PWM control for you. So you just 'set' the color data once. Like any NeoPixels you can chain them together, the output of one leading into the input of another for near-infinitely long strips.

Comes in a strip of 10 pieces. If you order more than one strip, it will come as multiple strips of 10, not one long strip.

Please note this is a surface mount part! It is possible to solder thin wires to the pads but it's designed for use on a SMD PCB. If you are not comfortable with hand-soldering SMD parts, check out the other RGB LEDs such as the thru-hole ones or in pixels/strips.

Adafruits detailed NeoPixel Uberguide has everything you need to use NeoPixels in any shape and size. Including ready-to-go library & example code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)

WS2812B Datasheet

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

Control Multiple Fully-Addressable WS2812B RGB LED Strips with a Raspberry Pi Single Board Computer

This is an update to an older guide done so that we can provide you with the fastest, most modern, ...
This is an update to an older guide done so that we can provide you with the fastest, most modern, ...

WLED Phone App | Control Addressable LEDs with an ESP32 or ESP8266

Today will be all about controlling Fully Addressable LED Lights using any Espressif ESP32 Dev...
Today will be all about controlling Fully Addressable LED Lights using any Espressif ESP32 Dev...

Setting Up Hyperbian – Ambient Lighting with your Screen

Break your television and monitors free from the confines of their edges with Hyperbian! This is an ...
Break your television and monitors free from the confines of their edges with Hyperbian! This is an ...

How to use WS2812B RGB LEDs with Raspberry Pi Pico

In this tutorial, we'll get some WS2812B LEDs (also known as GlowBits and NeoPixels) working with a ...
In this tutorial, we'll get some WS2812B LEDs (also known as GlowBits and NeoPixels) working with a ...

Projects

Wefted Waveforms

This project aims to fuse neopixel strips with papier mache and origami into a free-standing electro...
This project aims to fuse neopixel strips with papier mache and origami into a free-standing electro...

HUGE LED Pixel Panel

I’ve always been fascinated by LED screens and seeing beautiful colours mix and merge to creat...
I’ve always been fascinated by LED screens and seeing beautiful colours mix and merge to creat...

Time lapsing in OctoPrint (Properly!)

Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosur...
Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosur...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.