Search results for: 'usb to gpio adapter'

The RP2040 Interfacer is a small low-cost USB to UART and I2C Adapter (both 3.3V) powered by an RP2040 microcontroller that plugs straight into a USB Type-A...

RP2040-LoRa Development Board, Integrates SX1262 RF Chip, Long-Range Communication, Options For Frequency Band, USB Port Adapter Board Optional...

Compute Module 4 IoT Router Carrier Board Mini is an internet expansion board based on the Raspberry Pi Compute Module 4. When connecting with a gigabit network card via PCle, it brings Raspberry Pi CM4 two full-speed gigabit network ports and offers better performance, lower CPU usage, and higher stability for a long time work compared with a USB network card.

USB HUB BOX For Raspberry Pi Zero Series, 4x USB 2.0 Ports...

Compute Module 4 IoT Router Carrier Board Mini brings Raspberry Pi CM4 two full-speed gigabit network ports and offers better performance, lower CPU...

This USB-to-serial adapter lets you easily connect a TTL serial device to a PC by acting as a virtual serial port. The board is a Micro-USB carrier for ...

Wouldn't it be cool to drive a tiny OLED display, read a color sensor, or even just flash some LEDs directly from your computer? Sure you can program an Arduino...

ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, USB Port Adapter Board Optional...

If you're looking to make a custom cable with any two of Adafruit's HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never...

This MicroPython WBUS-DIP28 connector gives access to 24 GPIO in a DIP format, and allows you to power the board with an external battery.

The A-Star 32U4 Prime LV is a programmable board based on the ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables efficient operation from 2 V to 16 V (though it requires at least 3 V at start-up). This configuration of the A-Star 32U4 Prime LV includes microSD support and does not include any through-hole components; it is intended for those who want to customize the way it is assembled.

The smallest Raspberry Pi just got a whole lot cooler. The Raspberry Pi Zero W carries the same form factor and specifications as the original Pi Zero and provides built-in WiFi and Bluetooth 4.1!

The SIM7600G-H-M.2 is the LTE Cat 4 module which supports wireless communication modes of LTE-TDD, LTE-FDD, HSPA+, GSM, GPRS, EDGE, etc. It supports...

reServer is based on an ODYSSEY X86 v2 board and powered by Intel® Core™ 11th Gen. i3 and Intel UHD Graphics G4 48EUs (400 - 1250 MHz), which delivers...

HPS-3D160-U is the newest generation high-performance solid-state LiDAR sensor based on Time-of-Flight(ToF) principle. Equipped with an optimized lighting system...

Multi-functional All-in-one Mini-Computer Kit Designed for Raspberry Pi 5

The A-Star 328PB Micro is a tiny programmable module featuring the ATmega328PB AVR microcontroller, a backward-compatible replacement for the popular ATmega328P that features more general-purpose I/O and many additional peripherals.

The A-Star 32U4 Prime LV is a programmable board based on the ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables efficient operation from 2 V to 16 V (though it requires at least 3 V at start-up). This configuration of the A-Star 32U4 Prime LV includes microSD support and does not include any through-hole components; it is intended for those who want to customize the way it is assembled.

ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, USB Port Adapter Board Optional...

The A-Star 328PB Micro is a tiny programmable module featuring the ATmega328PB AVR microcontroller, a backward-compatible replacement for the popular ATmega328P that features more general-purpose I/O and many additional peripherals.

Like, no solder, no wiring, just instant plug-and-play? Dream no more - with the Adafruit Matrix Portal add-on for RGB Matricies, there's never been an easier way to create powerful Internet-connected LED displays.

This Mini Tower Kit from 52Pi is the ultimate home for your Raspberry Pi 5, including an LED ICE tower cooler, 0.96" OLED, strong ABS core and full port...

Mini Dual Gigabit Ethernet Base Board / Mini-Computer Kit Designed for Raspberry Pi Compute Module 5 (NOT Included), For All Variants Of CM5...

The compact NVIDIA Jetson Nano / Xavier NX carrier board provides multiple interfaces and NVIDIA JetPack support. Ideal for AI and IoT applications...

LattePanda Sigma x86 Windows single board computer server that boasts an Intel Core i5-1340P, Intel Iris Xe Graphics, and 32GB Dual-Channel LPDDR5-6400...

A203 is a extended carried board specifically for NVIDIA Jetson Nano / Xavier NX...

Since the advent of micro:bit, its simple and practical way of programming is widely loved by makers, students and teachers. Its sample design, coupled with a wealth...

A205 is a extended carried board specifically for NVIDIA Jetson Nano / Xavier NX. The rich peripheral interfaces make it suitable for edge areas to meet...

reServer is based on an ODYSSEY X86 v2 board and powered by Intel® Core™ 11th Gen. i3 and Intel UHD Graphics G4 48EUs (400 - 1250 MHz), which delivers...

Jetson Xavier NX, cluster, Carrier Board...

Coming soon! Sign up to be notified when we have these in stockFolks love our wide selection of RGB matrices and accessories for making custom colorful...

Alpha 864s is the latest version of the powerful development board that comes pre-installed with windows 10 on the built-in 64GB, It is not activated but we have not found any limitations due to this. This latest generation has been updated to intel's 8th generation Dual-core M3-8100y with 4 threads and a 3.4Ghz clock and 8Gb of LPDDR3 RAM and a huge 30% increase in power over the previous generation. The built-in Arduino Leonardo co-processor and 2x 50pin GPIO headers with support for I2C, I2S, USB, RS232, UART and RTC give you everything you need to build your next superpowered project.

Nano Base Board (B) for Raspberry Pi Compute Module 5, Same Size As The CM5...

The dAISy HAT is the perfect AIS receiver for your Raspberry Pi projects and embedded applications. This two-channel marine AIS receiver works great with...

Squeeeeze down your next ESP32 project to its bare-bones essential with the Adafruit HUZZAH32 Breakout. This breakout is basically the 'big sister' of Adafruit's HUZZAH...

Raspberry Pi Compute Module 5 IO Board with PoE Feature, for all Variants of CM5...

Power your Pi with a wide range of input voltages from 3 to 16V!

The STEMlab 125-14 Starter Kit is a starter kit for developing FPGA applications that includes a Red Pitaya STEMlab 125-14 board, SD card, Ethernet cable...

This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a computer, laptop, or on our cigarette power supply to provide our development boards with 5V.

Need more gigabytes on your Pi? Connect a SATA hard disk or SSD to your Raspberry Pi with this compact and high-performance USB to SATA adapter.