Search results for: 'rs485 hat'
RS485 CAN HAT for Raspberry Pi
Brand: Waveshare
RS485 CAN HAT For Raspberry Pi, Allows Stable Long-Distance Communication
$22.75 AUD, inc GST
Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections
Brand: Waveshare
Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections...
$36.05 AUD, inc GST
RS485 Expansion HAT for Raspberry Pi - 2-Channel Isolated
Brand: Waveshare
This is a 2-channel isolated RS485 expansion HAT designed for Raspberry Pi, adopts the SC16IS752+SP3485 solution, with embedded protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc.
$31.85 AUD, inc GST
Dual-channel RS485 Expansion Hat for Raspberry Pi 4B
Brand: DFRobot
Want to increase reliability and anti-interference for data transmission in your industrial applications? Try the RS485 Expansion HAT for Raspberry Pi....
$50.25 AUD, inc GST
KKSB HAT Case for Raspberry Pi 5
Brand: KKSB
This KKSB Case for Raspberry Pi 5 features a spacious interior that accommodates add-on boards and coolers, assisted by the included 40-pin stackable...
$43.95 AUD, inc GST
RS-485 Breakout
Brand: Sparkfun
This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can reach transmission speeds of up to 10Mbps. This board requires a very low amount of power and can operate from a single +3.3VDC supply.
$20.80 AUD, inc GST
RS485 Pi
Brand: AB Electronics
The RS485 Pi is a communication board supporting the RS-485 serial protocol.
$28.95 AUD, inc GST
Pimoroni Flat HAT Hacker
Brand: Pimoroni
Now at right angles! Securely attach a HAT (or two mini HATs) to your Raspberry Pi 400, so that they're pointing upwards and correctly oriented.
$18.80 AUD, inc GST
Similar matches
MAX485 - TTL UART to RS485 Converter Module
Brand: Core Electronics
Going from TTL to RS485 is made simple by this prototyping friendly module. On one side of the board are the TTL IOs, and on the other are the RS485. At the core is a MAX485 which is powered by 5V.
$3.40 AUD, inc GST
USB to RS485 Converter (FT232)
Brand: Core Electronics
Featuring a MAX485 and FTDI232, this converter will take USB and turn it into an RS485 signal.
$3.60 AUD, inc GST
Industrial USB to RS485 Converter
Brand: Waveshare
This is an industrial USB to RS485 converter with original FT232RL and SP485EEN inside. It features embedded protection circuits such as lightning-proof, resettable fuse, ESD protection, and TVS diode, etc. It's pretty small in size.
$17.90 AUD, inc GST
Industrial 6-Channel ESP32-S3 WiFi Relay Module
Brand: Waveshare
Industrial 6-Channel ESP32-S3 WiFi Relay Module, Supports WiFi / Bluetooth / RS485 control, Onboard RS485 / Pico HAT interfaces, With Multiple Isolation...
$52.30 AUD, inc GST
USB to RS485 converter
Brand: Core Electronics
Featuring a MAX485 and CH340, this converter will take USB and turn it into an RS485 signal.
$1.80 AUD, inc GST
2-Channel RS485 Module for Raspberry Pi Pico, SP3485 Transceiver, UART To RS485
Brand: Waveshare
2-Channel RS485 Module For Raspberry Pi Pico
$11.50 AUD, inc GST
4.26inch e-Paper display HAT (800x480)
Brand: Waveshare
4.26inch e-Paper display HAT, 800x480, Black/White, SPI Interface...
$51.60 AUD, inc GST
RS485 Shield
Brand: DFRobot
RS485 is an industrial standard for long distance, anti-interferrence and reliable communication. So we create this RS485 shield, especially designed for the Arduino controller board. It can easily convert UART/Serial protocol to RS485 protocol. This board allows Arduino access to industrial standard protocol easily.
$15.60 AUD, inc GST
RS-232 to RS-485 Converter
Brand: DFRobot
This is a simple RS232 to RS485 converter that is self powered using the TX, RX or RTS, CTS signals for power. The RS232 is DB9 female connector, and the RS485 side is a DB9 male or 4 position terminal block.
$10.90 AUD, inc GST
RS485 Temperature & Humidity Sensor
Brand: DFRobot
This is a high-precision industrial-grade RS485 temperature and humidity sensor. It uses high-quality digital integrated transducer and reliable digital processing...
$50.25 AUD, inc GST
2-Channel Isolated RS232 Expansion HAT
Brand: Waveshare
2-Channel Isolated RS232 Expansion HAT for Raspberry Pi, SC16IS752+SP3232 Solution, with Multi Onboard Protection Circuits
$26.55 AUD, inc GST
Industrial Grade RS485 Repeater
Brand: DFRobot
This is an industrial-grade high-performance RS485 photoelectric isolation repeater that converts one-way RS485 to one-way RS485. Compatible with EIA/TIA RS485 standard...
$93.60 AUD, inc GST
Industrial Isolated USB To 4-Ch RS485 Converter (B)
Brand: Waveshare
USB-to-RS485 converter with four isolated channels and built-in surge and ESD protection, for stable multi-OS communication in an aluminium alloy case.
$40.10 AUD, inc GST
Arduino Opta RS485
Brand: Arduino
Arduino Opta is a secure, easy-to-use micro PLC with Industrial IoT capabilities.
Designed in partnership with Finder – leading industrial and building...
$294.95 AUD, inc GST
USB to RS422/RS485 Cable
Brand: DFRobot
The USB 2.0 to RS422/RS485 Cable provides a simple and easy to connect between the USB and RS422/RS485 ports interface. Ideally for PC, thin client or servers to provide instant RS422/RS485 ports expansion via USB ports.
$43.70 AUD, inc GST
M5Stack RS485 to TTL Converter Unit
Brand: M5Stack
It's used to convert the TTL standard to the RS485 standard. If the outside serial device is RS485 standard, you can attach this unit onto M5stack, therefore, to implement the communication with RS485 device by TTL protocol.
$11.25 AUD, inc GST
Ultrasonic 9-in-1 RS485 Weather Sensor for Arduino (Wind, Rain, Temp, Light, Noise)
Brand: DFRobot
The RS485 all-in-one weather sensor measures wind speed & direction, air temperature, relative humidity, atmospheric pressure, light intensity, noise...
$384.95 AUD, inc GST
USB to RS485 Serial Cable
Brand: DFRobot
This USB to RS485 serial cable with built-in CH340 chip allows to directly realize the communication between PC and 485 device without extra wire...
$8.40 AUD, inc GST
RS485 Wind Speed Transmitter
Brand: DFRobot
This wind speed sensor is a professional meteorological instrument used to measure horizontal wind speed within 0~32.4m/s. It integrates a hall sensor inside. The...
$81.40 AUD, inc GST
Ultrasonic 7-in-1 RS485 Weather Sensor for Arduino (Wind, Rain, Temp, Light)
Brand: DFRobot
Get precise 7-in-1 weather data: ultrasonic wind, temp, humidity, rain & more with this RS485 station. Modbus & Arduino ready. Start robust monitoring!...
$429.95 AUD, inc GST
Laser Ranging Sensor RS485 (4-400cm)
Brand: DFRobot
This laser range sensor can be used to detect objects in 4~400cm with ±2cm accuracy, RS485 output, applicable to various detection scenarios like,...
$42.10 AUD, inc GST
Industrial RS485 Opto-Isolated Hub
Brand: DFRobot
This 4-Port RS485 bus split hub is specially designed to meet the requirements of RS485 large-scale systems in complex electromagnetic environments. Its transmission...
$114.95 AUD, inc GST
RS485 Connector Expansion Shield for LattePanda V1
Brand: DFRobot
An industrial-grade RS485 shield for LattePanda! It is designed to expand a reliable RS485 interface(OPEN4) for LattePanda V1. The receiving and sending of the module...
$41.95 AUD, inc GST
RS485 Connector Expansion Shield for LattePanda Alpha&Delta
Brand: DFRobot
This industrial-grade RS485 shield from DFRobot is specially designed to expand two parallel RS485 ports (terminal) with high reliability for LattePanda Alpha and...
$50.30 AUD, inc GST
M5StickC Yun Hat (SHT20, BMP280, SK6812)
Brand: M5Stack
HEART is built using the MAX30100 chipset. MAX30100 is a complete pulse oximetry and heart-rate sensor system solution designed for the demanding requirements of wearable devices. The MAX30100 provides very small total solution size without sacrificing optical or electrical performance. Minimal external hardware components are needed for integration into a wearable device.
$30.15 AUD, inc GST
M5StickC Proto Hat
Brand: M5Stack
PROTO HAT is a HAT size of universal prototyping board. You can have the total freedom to make your own project as you want it, with prototyping boards that allow laying out the customized circuit to interact with stickC port on top.
$3.35 AUD, inc GST
M5StickC ENV Hat III (SHT30, QMP6988)
Brand: M5Stack
The ENV III HAT is a multifunctional environmental sensor adapted to attach to the M5StickC series.
$20.95 AUD, inc GST
RS485 Wind Direction Transmitter
Brand: DFRobot
The wind direction sensor is a professional meteorological instrument used to measure horizontal wind direction. It integrates a hall sensor inside. The shell and...
$81.15 AUD, inc GST
Portenta HAT Carrier
Brand: Arduino
Prototype like a pro, add automation or raise the bar in robotics: Portenta Hat Carrier makes high performance easy for you.
$86.80 AUD, inc GST
USB to RS-485 Converter
Brand: Sparkfun
This is the newest revision and fixes issues with the last board. This breakout board pairs an SP3485 RS-485 transceiver with an FT232RL USB UART IC to convert a USB stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can reach transmission speeds of up to 10Mbps.
$43.65 AUD, inc GST
PWRCAN 13.2 Module: Isolated 2-Ch CAN & 1-Ch RS485
Brand: M5Stack
CAN- or RS485-controlled GPIO - great for robots or protocol conversion.
$47.50 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.