Search results for: 'optical sensor breakout'

This fancy optical flow sensor detects the motion of surfaces in front of it, from ~80mm to infinity! It's great for DIY drone builds, and it's compatible with Pimoroni's new Breakout Garden HAT with SPI.

The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout includes the MAX30101, a highly sensitive optical sensor and successor...

Detect motion of close-up surfaces with this Breakout Garden compatible optical navigation breakout - great for floor tracking for ground-dwelling robots!

We live in a colorful world, but how much do you really know about color? You eyes may deceive you, while the sensors don’t lie. This AS7341sensor can tell you the...

DFRobot TCS3430 XYZ Tristimulus Color Sensor employs the new generation of TCS3430 spectral sensor IC launched by the well-known AMS company. It features advanced...

This sensor is composed of an infrared emitter on one upright and a shielded infrared detector on the other. By emitting a beam of infrared light from one upright to the other, the sensor can detect when an object passes between the uprights, breaking the beam. Used for many applications including optical limit switches, pellet dispensing, general object detection, etc. Gap width = 10mm

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K PIR Breakout is a simple board equipped...

The SparkFun Qwiic Tristimulus Color Sensor is built around the OPT4048 High Speed High Precision Tristimulus XYZ Color Sensor from TI...

The SparkFun Qwiic Mini ToF Imager is built around VL53L5CX from ST Electronics; a state of the art, Time-of-Flight (ToF), multi zone ranging sensor...

The SparkFun Qwiic Human Presence and Motion Sensor is built around the STHS34PF80 low-power, high-sensitivity IR sensor for presence and motion detection...

The SparkFun LSM6DSV16X 6DoF IMU is a Qwiic-enabled, AI-featured, breakout based on the LSM6DSV16X from STMicroelectronics...

The Qwiic Mini Human Presence and Motion Sensor is built around the STHS34PF80 low-power, high-sensitivity IR sensor for presence and motion detection...

The SparkFun LSM6DSV16X Micro 6DoF IMU is a Qwiic-enabled, AI-featured, breakout based on the LSM6DSV16X from STMicroelectronics...

The SparkFun Qwiic Mini dToF TMF8821 Imager is a direct time-of-flight sensor that includes a single modular package with an associated VCSEL...

The ICG-20660L is a high-precision 6-axis IMU module that integrates a 3-axis accelerometer, a 3-axis gyroscope, and on-chip 16-bit ADCs. With up to ±1%...

The SparkFun Qwiic dToF TMF8820 Imager is a direct time-of-flight sensor that includes a single modular package with an associated VCSEL...

The TMF8801 is a time-of-flight (ToF) distance ranging sensor that high dynamic range and detection sensing measurements from 2-250 cm distances...

The SparkFun AS7262 Visible Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easier than ever to measure and characterize how different...

The SparkFun BME680 Environmental Sensor is a breakout that combines a gas sensor with temperature, humidity and barometric pressure sensing for a complete environmental...

This multifunctional environmental sensor comprises SHTC3 temperature & humidity sensor, BMP280 barometric pressure sensor, VEML7700 light sensor, and...

The SparkFun AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easier than ever to measure and characterize...

Detect fourteen distinct channels of light (from 380 nm to 1000 nm) with this versatile spectral sensor...

The BMM150 is a low-power and low noise 3-axis digital geomagnetic sensor that perfectly matches the requirements of compass applications...

Measure indoor air quality—total volatile organic compounds (TVOC) and equivalent CO2 (eCO2)—with this digital sensor for Raspberry Pi and Arduino.

The Fermion: MEMS H2 Hydrogen Gas Detection Sensor (breakout) provides qualitative measurements of hydrogen gas concentrations, making it perfect for...

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with...

Monitor the Indoor Air quality with Fermion's Hydrogen Sulfide Detection. Featuring advanced MEMS technology, DFRobot H2S probe offers swift response and...

This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity within a short range of ~5cm. Read more...

Humidity is the concentration of water vapor (water when it's a gas) in the air. Some places have more and make you feel soggy and hot like you're in a sauna. Other...

A true carbon dioxide sensor that can detect CO2 levels between 400 and 5,000 ppm, mounted on a Breakout Garden and Qw/ST-compatible breakout. SCD41 is...

Sensiron Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And, finally Adafruit have some that have a true I2C interface for...

This ICM20948 motion sensor is the bee's knees! Detect movement in nine different ranges of motion: 3-axis acceleration, 3-axis gyroscopic motion, and 3-axis compass heading.

The VL53L3CX is the latest Time-of-Flight (ToF) product from STMicroelectronics and embeds ST’s third-generation FlightSense technology. With the improved detection...

The SparkFun BME280 Atmospheric Sensor Breakout is an easy way to measure barometric pressure, humidity, and temperature readings, all without taking up too much...

This breakout is a simple and robust way to add ultrasonic distance sensing to your robot. Supported on BitBot XL, Pi2Go Mk2, Pi-Bug (v1.1 and later), Minibit and other 4tronix robots released from July 2019 onwards (including the Robobit Mk3, v1.3 onwards)

This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applications and can be used in both 3.3V and 5V systems.

Give your next sensor project a nose for gasses with the Adafruit MiCS-5524 Gas Sensor Breakout. This breakout makes it easy to use this nice sensor from SGX Sensortech...

Maintain Clean Air Quality with Fermion Professional Formaldehyde Detector. DFRobot MEMS technology offers compact dimensions, low power consumption, and...

Simple breakout board for the MQ - 3, MQ - 4, MQ - 6, MQ -8, and MQ -137 gas sensors. All you need is VCC at 5V, GND, and a resistor to an ADC, that is it.

The colors of the rainbow, so pretty in the sky Are also in this sensor, controlled by you and I! Detect trees of green, and red roses too with the new Adafruit...