Search results for: 'nema 11 stepper motor'
Stepper Motor: Bipolar, 200 Steps/Rev, 28×32mm, 3.8V, 0.67 A/Phase
Brand: Pololu
This NEMA 11-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 670 mA at 3.5 V, allowing for a holding torque of 600 g-cm (8.3 oz-in).
$79.70 AUD, inc GST
A4988 Stepper Motor Driver Carrier, Black Edition
Brand: Pololu
Our Black Edition A4988 stepper motor driver carrier is a higher-performance drop-in replacement for the original A4988 stepper motor driver carrier. It features a four-layer PCB for better thermal performance, allowing the A4988 microstepping bipolar stepper motor driver to deliver approximately 20% more current than Pololu's two-layer (green) version. Like Pololu's original carrier, the Black Edition offers adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions. It operates from 8 V to 35 V and can deliver up to 2 A per coil with sufficient additional cooling. This board ships with 0.1″ male header pins included but not soldered in.
$16.70 AUD, inc GST
Small Stepper Motor
Brand: Sparkfun
These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern.
$28.40 AUD, inc GST
Pololu Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Brand: Pololu
The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC)
$58.30 AUD, inc GST
1700 Series Face Tapped Stepper Motor Mount (NEMA 11)
Brand: goBilda
The NEMA 11 stepper motor mount is able to fasten to the face of a NEMA 11 motor using the supplied pan head screws. The screws are...
$11.80 AUD, inc GST
Similar matches
TB6600 Stepper Motor Driver
Brand: DFRobot
Stepper motor is a brushless DC electric motor that divides a full rotation into a number of equal steps The motor's position can then be commanded to move and hold at one of these steps.
$33.50 AUD, inc GST
Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA
Brand: Adafruit
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified...
$37.40 AUD, inc GST
Mini Stepper Motor - 200 Steps - 20x30mm NEMA-8 Size
Brand: Adafruit
This tiny stepper motor is the same quality and step-size as the big NEMA-17's Adafruit stock, but so cute so it will work with compact CNC builds. This 4-wire bipolar...
$43.35 AUD, inc GST
Stepper Motor with Cable
Brand: Sparkfun
This is a simple, but very powerful stepper motor with a 4-wire cable attached.
$60.50 AUD, inc GST
Stepper Motor Mount with Hardware - NEMA-17 Sized
Brand: Adafruit
You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one one here!...
$23.25 AUD, inc GST
Pololu High-Power Stepper Motor Driver 36v8
Brand: Pololu
This discrete MOSFET stepper motor driver enables control of one bipolar stepper motor. It supports a wide 8 V to 50 V operating voltage range and can...
$49.40 AUD, inc GST
A5984 Stepper Motor Driver Carrier, Fixed 750mA@5V / [email protected] (Soldered Header Pins)
Brand: Pololu
This version is item #5348 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It...
$10.40 AUD, inc GST
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
Brand: Pololu
This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an...
$25.10 AUD, inc GST
TB67S279FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
Brand: Pololu
This version of our TB67S279FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an...
$21.40 AUD, inc GST
A4988 Stepper Motor Driver Carrier
Brand: Pololu
This breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). This board ships with 0.1″ male header pins included but not soldered in.
$13.90 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
$69.40 AUD, inc GST
DRV8825 Stepper Motor Driver Carrier, High Current
Brand: Pololu
This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of Pololu's A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. This board ships with 0.1″ male header pins included but not soldered in.
$26.35 AUD, inc GST
A4988 Stepper Motor Driver Carrier (Header Pins Soldered)
Brand: Pololu
This version of Pololu's A4988 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard.
$16.15 AUD, inc GST
DRV8825 Stepper Motor Driver Carrier, High Current (Header Pins Soldered)
Brand: Pololu
This version of Pololu's DRV8825 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the DRV8825 Stepper Motor Driver Carrier product page for more information about the driver.
$28.45 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 35×28mm, 10V, 0.5 A/Phase
Brand: Pololu
This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 500 mA at 10 V, allowing for a holding torque of 1 kg-cm (14 oz-in).
$56.70 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase
Brand: Pololu
This NEMA 17-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.2 A at 4 V, allowing for a holding torque of 3.2 kg-cm (44 oz-in).
$97.65 AUD, inc GST
Stepper Motor with 18cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has an integrated 18 cm (7″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
$184.95 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 20×30mm, 3.9V, 0.6 A/Phase
Brand: Pololu
This small NEMA 8-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 600 mA at 3.9 V, allowing for a holding torque of 180 g-cm (2.5 oz-in). With a weight of 60 g, this is one of the smallest stepper motors Pololu carry.
$91.95 AUD, inc GST
EasyDriver - Stepper Motor Driver
Brand: Sparkfun
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
$30.70 AUD, inc GST
Small Size and High Torque Stepper Motor - 24BYJ48 (Seeed Studio)
Brand: Seeed Studio
Small size and high torque, Mainly used in air conditioner louver, small cooling heating fan and Automatic curtains etc. Specification: •Phase: 4 •Step...
$11.95 AUD, inc GST
Small Reduction Stepper Motor - 5VDC 32-Step 1/16 Gearing
Brand: Adafruit
This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting...
$11.65 AUD, inc GST
Bipolar Stepper Motor with Planet Gear Box (18kg.cm)
Brand: DFRobot
This is a bipolar stepper motor with a planetary gearbox (gear ratio: 5.18) and uses a standard 8mm-diameter D type output shaft, with a 1.8° step angle (200 steps/revolution).
$68.65 AUD, inc GST
TB67S581FNG Stepper Motor Driver Carrier
Brand: Pololu
This breakout board for Toshiba’s TB67S581FNG microstepping bipolar stepper motor driver features adjustable current limiting, over-current and...
$11.70 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×41mm, 5.7V, 1 A/Phase
Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 5.7 V, allowing for a holding torque of 4 kg-cm (55 oz-in).
$139.95 AUD, inc GST
1700 Series Face Tapped Stepper Motor Mount (NEMA 14)
Brand: goBilda
This mount allows you to fasten a NEMA 14 motor to any goBILDA component that contains the 16mm pattern. The included M3 socket head screws.....
$13.45 AUD, inc GST
Stepper Motor with 38cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has an integrated 38 cm (15") threaded rod as its output shaft, turning it into a linear actuator capable...
$249.95 AUD, inc GST
1700 Series Face Tapped Stepper Motor Mount (NEMA 17)
Brand: goBilda
This mount allows you to fasten a NEMA 17 motor to any goBILDA component that contains the 16mm pattern. The included M3 socket head screws.....
$15.15 AUD, inc GST
Pololu Stamped Aluminum L-Bracket for NEMA 14 Stepper Motors
Brand: Pololu
This black anodized aluminum bracket lets you securely mount typical NEMA 14-size stepper motors to your project. The bracket features several slots and...
$10.05 AUD, inc GST
A5984 Stepper Motor Driver Carrier, Fixed 750mA@5V / [email protected]
Brand: Pololu
This is a carrier board for Allegro’s A5984 microstepping bipolar stepper motor driver. It offers eight different microstep resolutions (down to...
$8.90 AUD, inc GST
Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors
Brand: Pololu
This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slots and holes for a wide variety of mounting solutions, and four M3×6mm screws are included for securing the motor to the bracket.
$11.40 AUD, inc GST
Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D
Brand: Adafruit
Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers...
$16.85 AUD, inc GST
Pololu High-Power Stepper Motor Driver 36v4
Brand: Pololu
This discrete MOSFET stepper motor driver enables control of one bipolar stepper motor. It supports a wide 8 V to 50 V operating voltage range and can...
$41.05 AUD, inc GST
Stepper Motor with 28cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
$259.95 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 8.6V, 1 A/Phase
Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 8.6 V, allowing for a holding torque of 14 kg-cm (190 oz-in).
$289.95 AUD, inc GST
Stepper Motor - 68 oz.in (400 steps/rev)
Brand: Sparkfun
These steppers are a great way to get things moving, especially when positioning and repeatability is a concern.
$62.95 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.