Search results for: &#039;microsd card module for arduino&#039;

If you need to load or store large amounts of data, look no further than this 3.3V SPI microSD card module.

$1.15 AUD, inc GST

This is a Micro SD card module from DFRobot. The SD Card Module has various applications such as data logging, audio, video, graphics. This module will greatly expand the capbility of an Arduino!

$8.23 AUD, inc GST

MicroSD card breakout board+

Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides 150mA for power-hungry cards...

$13.20 AUD, inc GST

This simple board breaks out the pins of a microSD card connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1" connectors.

Breakout Board for microSD Card

Brand: Pololu

$8.30 AUD, inc GST

W5100 Ethernet + SD Card Shield (Arduino Compatible)

The Ethernet Shield for Arduino is based on the Wiznet W5100 and connects your Arduino-compatible board to the internet a few minutes. Simply plug this module onto board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet.

$9.15 AUD, inc GST

Adafruit microSD Card BFF Add-On for QT Py and Xiao

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of...

$5.50 AUD, inc GST

Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested.

Breakout Board for microSD Transflash

Brand: Sparkfun

$9.90 AUD, inc GST

This Gravity: Serial Data Logger with USB function, can store data more conveniently and is suitable for long-time environmental data recording and...

Fermion: Serial Data Logger for Arduino

Brand: DFRobot

$9.85 AUD, inc GST

The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level shifting hardware, this board allows you to utilize a microSD card at Arduino’s SD library’s top speed on a 5V system. With this small breakout board, that is not much bigger than your fingernail, adding mass storage to your project will never be easier.

SparkFun Level Shifting microSD Breakout

Brand: Sparkfun

$10.85 AUD, inc GST

This compact board breaks out the pins of a microSD card connector necessary to interface with the card through SPI (Serial Peripheral Interface), and it...

Breakout Board for microSD Card with 3.3V Regulator and Level Shifters

Brand: Pololu

$12.60 AUD, inc GST

Add an SD slot and prototyping area in a single shield

Arduino SD Proto Shield

Brand: Arduino

$33.70 AUD, inc GST

Are you developing a complex IoT device with your MKR board and running out of memory? Add Flash memory and microSD storage to your MKR board, and allow over-the-air updates, with the Arduino MKR MEM Shield.

Arduino MKR MEM Shield

Brand: Arduino

$40.70 AUD, inc GST

This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino's built-in SD library...

SD Card Shield V4 (Seeed Studio)

Brand: Seeed Studio

$28.60 AUD, inc GST

The DFRduino Ethernet Shield V2 is finally released. This new version supports Mega both 1280 and 2560. And it supports Micro SD card read/write as well. The ethernet shield is fully functional now. The V2 Ethernet Shield is fully compatible with Arduino Ethernet Shield. With the offical ethernet library, you can do exactly the same thing as the original one. But at a more affordable price.

DFRduino Ethernet Shield (Support Mega and Micro SD) For Arduino

Brand: DFRobot

$24.53 AUD, inc GST

Adafruit SPI Flash SD Card - XTSD 2 GB

This breakout is for a fascinating chip - it looks like an SPI Flash storage chip (like the GD25Q16) but its really an SD card, in an SMT chip format....

$18.90 AUD, inc GST

Adafruit SPI Flash SD Card - XTSD 512 MB

This breakout is for a fascinating chip - it looks like an SPI Flash storage chip (like the GD25Q16) but its really an SD card, in an SMT chip format. What that means is that you wire up like an SD card breakout, and use the SD card libraries you already have for your microcontroller. For example, you can use the built in SD library in Arduino, or for CircuitPython Adafruit have an sdcard library. The breakout will act just like a 512 MB sized card with FAT formatting (it's pre-formatted).

$17.40 AUD, inc GST

Adafruit SPI Flash SD Card - XTSD 4 GB

This breakout is for a fascinating chip - it looks like an SPI Flash storage chip (like the GD25Q16) but its really an SD card, in an SMT chip format....

$24.15 AUD, inc GST

MicroSD Memory Card - 16GB Class 10

Add speedy mega-storage in a jiffy using this 16 GB Class 10 micro-SD card

$20.11 AUD, inc GST

Official Raspberry Pi 64GB A2-Class micro SD card

Brand: Raspberry Pi

Reliable, fast, and tested storage, ready to go for your Raspberry Pi projects!

$47.50 AUD, inc GST

Reliable, fast, and tested storage, ready to go for your Raspberry Pi projects!

Official Raspberry Pi 128GB A2-Class micro SD card

Brand: Raspberry Pi

$64.00 AUD, inc GST

This microSD card is preloaded with RetroPie and is part of our RetroPie Gaming Kits

RetroPie Preloaded 16GB microSD Card for Raspberry Pi 4

Brand: RetroPie

$53.10 AUD, inc GST

LibreELEC Preloaded 16GB microSD Card for Raspberry Pi 4

This 16GB microSD card is preloaded with LibreELEC and the Argon scripts for a Raspberry Pi 4

$19.95 AUD, inc GST

Expand the power of your Nano projects with easy cable connectivity. The Arduino Nano Connector Carrier brings plug-and-play simplicity to the Nano family, making it faster than ever to prototype with Qwiic, Grove, and Modulino modules, and to unlock new potential with onboard microSD storage.

Arduino Nano Connector Carrier

Brand: Arduino

$24.50 AUD, inc GST

SD to MicroSD Extender - 23cm (9 inch) long cable

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with an SD Card Extender. This simple, but effective device...

$13.55 AUD, inc GST

Micro SD Card Extender - 68cm (26 inch) long cable

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with a Micro SD Card Extender . This simple, but effective device...

$13.90 AUD, inc GST

4 Pack MicroSD Exteneders

Brand: Arducam

Extend your uSD slot on your Raspberry Pi or 3D printer.

$25.10 AUD, inc GST

microSD Sniffer

Brand: Sparkfun

When playing with microSD, you sometimes need to view what the SPI traffic is doing, whether for hacking or debugging. The microSD Sniffer allows you to hook up an external device, such as a logic analyzer or microcontroller, to view what signals are being passed back and forth. Insert one side into a regular uSD socket and a uSD card into the on-board socket, simple as that.

$22.95 AUD, inc GST

SanDisk MAX Endurance microSD Card - 64GB

Built for always-on projects that never stop reading and writing. Rated for 30,000 hours of continuous use, so your logger or Pi doesn't randomly stop working because of a worn-out card.

$99.00 AUD, inc GST