Search results for: 'lo ra wan gateway'

Showing results for lo ra wan gateway

48 results

SX1303 915M LoRaWAN Gateway Module+HAT for Raspberry Pi

Brand: Waveshare
SX130x 868M/915M LoRaWAN Gateway Module/HAT for Raspberry Pi, L76K Module(HAT only), Standard Mini-PCIe Socket, Long range Transmission, Large Capacity,...
$159.95 AUD, inc GST

WisGate Edge Lite 2 (RAK7268V2)- AU915 - Without LTE - Black

Brand: RAKwireless

Multi-channel LoRaWAN gateway with multi-backhaul Ethernet, Wi-Fi and cellular, PoE and LED status monitoring plus remote management for edge IoT networks.

$219.95 AUD, inc GST

WisGate Edge Pro (RAK7289V2) - 8 channel - without LTE

Brand: RAKwireless

IP67-rated outdoor LoRaWAN gateway offering reliable long-range connectivity for industrial IoT with multi-backhaul and remote management.

$594.95 AUD, inc GST

8 Channel LoRa Gateway Kit comes with Raspberry Pi, LoRa and GPS

Brand: Adafruit
If you're building a IoT project and need to send data back-and-forth, the WiFi module built into newer Pi's should be fine for most cases. But, what if you find...
$429.95 AUD, inc GST

2.6dBi LoRa Antenna - SMA male - 915MHz - 195mm

Brand: Seeed Studio
LoRa Antenna for devices from the E5 series with maximal gain of 2.6dBi and frequency of 902-928MHz...
$8.55 AUD, inc GST

Omni Outdoor Antenna High Gain Fiberglass Full Wave 915MHz 6dBi RP-SMA (LoRa AU915 & AS923)

High Gain Omni Antenna specifically design for LoRa Gateway applications and a zero compromise setup.
$214.95 AUD, inc GST

Wio-SX1262 for XIAO

Brand: Seeed Studio

This is a high-performance LoRa module specifically designed for the XIAO series development boards. Based on the Semtech SX1262 chip, it supports global LoRa bands (862-930MHz).

$10.05 AUD, inc GST

LoRaWAN ESP32-S3 Dev Board with Display for IoT Prototyping & Smart Home

Brand: DFRobot
DFRobot LoRaWAN ESP32 - S3 Development Board, which supports LoRa/LoRaWAN/Meshtastic protocols, is compatible with HomeAssistant and serves as a wireless...
$34.90 AUD, inc GST

SenseCAP Solar Node P1 for Meshtastic

Brand: Seeed Studio
It is an economical solar-powered comms node or repeater based on Meshtastic. It meets basic comms needs in no - network zones. Unlike P1-Pro, P1 lacks a...
$259.95 AUD, inc GST

Pilot Gateway Pro LoRa Enclosure Kit for Raspberry Pi 4 - RAK7244

Brand: Adafruit
If you have a Raspberry Pi LoRa project using our fancy 8-Channel LoRa HAT you want enclosed and need something extra durable, this...
$84.70 AUD, inc GST

Pilot Gateway Pro LoRa Enclosure Kit for Raspberry Pi 3 - RAK7243

Brand: Adafruit
If you have a Raspberry Pi LoRa project using Adafruit's fancy 8-Channel LoRa HAT you want enclosed, and need something extra durable, this enclosure is absolutely perfect...
$76.40 AUD, inc GST

Industrial Die-Cast Aluminum Outdoor Gateway Enclosure with 2x N-Type Antenna Connectors - IP67 Rated for Extreme Environments

Brand: RAKwireless
Explore the robust Industrial Die-Cast Aluminum Outdoor Gateway Enclosure, IP67 rated for extreme environments. Ideal for RAK outdoor LoRa® gateways, offering dust protection and water resistance. Discover more about its thermal characteristics and compatibility.
$129.95 AUD, inc GST

LoRa Fiberglass Antenna, 860-930MHz, 5dBi, 600mm

Brand: Seeed Studio
Fibreglass LoRa antenna with gain of 8dBi, frequency range 858-878MHz and 130cm length...
$149.95 AUD, inc GST

2.8dBi LoRa Antenna - SMA male - 868MHz - 195mm

Brand: Seeed Studio
LoRa Antenna for devices from the E5 series with maximal gain of 2.8dBi and frequency of 868MHz...
$8.10 AUD, inc GST

LoRa Fiberglass Antenna Kit; 902-928MHz-3dBi with Antenna Base

Brand: Seeed Studio
LoRa-Fiberglass Antenna-902-928MHz-3 dBi-360mm-Seeed Studios...
$124.95 AUD, inc GST

Wio-E5 ESP32-C3 Dev Kit (Supports WiFi/Bluetooth/CAN)

Brand: Seeed Studio
Wio ESP32 CAN Dev Kit - embedded STM32WLE5JC&ESP32-C3, supports WiFi/Bluetooth&CAN FD&CAN2.0 Wio ESP32 CAN Dev kit is based on the ESP32C3 and uses Wio-E5...
$88.40 AUD, inc GST

LoRa E5 Shield

Brand: Unexpected Maker

LoRa E5 Shield for the TinyPICO, TinyS2 & TinyS3 This shield includes an E5 LoRa module from Seeed, that works in a range of regions

$32.23 AUD, inc GST

SparkFun LoRa Thing Plus - expLoRaBLE

Brand: Sparkfun
The SparkFun expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the...
$92.35 AUD, inc GST

SparkFun MicroMod LoRa Function Board

Brand: Sparkfun
The SparkFun MicroMod LoRa Function Board provides LoRA and LoRaWAN capabilities to your MicroMod project...
$68.95 AUD, inc GST

Portenta Max Carrier

Brand: Arduino
Easily prototype your Portenta applications. Deploy in zero time.
$574.95 AUD, inc GST
Similar matches

XIAO ESP32S3 for Meshtastic & LoRa

Brand: Seeed Studio
This thumb-sized LoRa dev kit, featuring the XIAO ESP32S3 and Wio-SX1262 LoRa module, is an ideal starter kit for Meshtastic and LoRa/LoRaWAN projects. Supporting WiFi, BLE, and LoRa, it includes a built-in power management chip and can be extended via IIC, UART, and other GPIO interfaces, with compatibility for Arduino development.
$21.20 AUD, inc GST

SX1262 LoRa Node Module for Raspberry Pi Pico, LoRaWAN

Brand: Waveshare
This is a SX1262 LoRa Node Module For Raspberry Pi Pico with LoRaWAN Support
$24.70 AUD, inc GST

SX1262 LoRa HAT for Raspberry Pi (915MHz)

Brand: Waveshare

A LoRa expansion board for Raspberry Pi offers ultra-long-range wireless communication up to 5 km, wake-on-radio and UART control for DIY IoT applications.

$41.55 AUD, inc GST

WisBlock RAK3172 LoRaWAN Evaluation Board Kit

Brand: RAKwireless

Break out STM32WLE5CC pins and prototype LoRaWAN A/B/C or P2P networks with slots for add-on modules, battery, solar and on-board charging.

$45.50 AUD, inc GST

Wio Tracker L1 Lite

Brand: Seeed Studio

Pre-flashed Meshtastic firmware for instant Long-Range GPS tracking and communication in a small and flexible form factor.

$57.30 AUD, inc GST

LoRa-E5 mini (STM32WLE5JC) Dev Board

Brand: Seeed Studio
LoRa-E5 mini is a compacted-sized development board suitable for the rapid testing and building of small-size prototyping and helps you design your ideal LoRaWAN wireless IoT device with a long-distance transmission range.
$45.65 AUD, inc GST

Rail-mount SX1262 LoRa Data Transfer unit (Outputs RS232/RS485/RS422)

Brand: Waveshare
SX1262-LoRa-DTU is a wireless data transfer unit with RS232, RS485 and RS422 interfaces based on the SX1262 module
$40.25 AUD, inc GST

Makerverse LoRa-E5 Breakout

Brand: Makerverse

Long-range and low power data transmission for remote projects.

$30.60 AUD, inc GST

Arduino MKR WAN 1310

Brand: Arduino
A powerful board designed for IoT projects with LoRa connectivity. Ideal for makers looking to add long-range, low-power communication to their creations. Learn more about its features and applications today.
$82.10 AUD, inc GST

LoRa Transceiver Module (RFM95CW)

Brand: Sparkfun
RFM95CW is an ultra-low-power, high-performance LoRa transceiver for various frequency of 137-1020 MHz wireless applications. The high integration of RFM95C simplifies...
$27.85 AUD, inc GST

GNSS-RTK High Precision Positioning Kit with LoRa (US 915 MHz, GPS / GLONASS / Galileo / BDS / QZSS)

Brand: DFRobot
Achieve centimeter-level accuracy with out-of-the-box GNSS-RTK Positioning Kit. Pre-configured LoRa data link for easy setup. US 915 MHz, For UAVs, device...
$279.95 AUD, inc GST

8-Channel RS485 to RJ45 Ethernet Serial Server (PoE, Isolated, Rail-Mount)

Brand: Waveshare

Industrial-grade 8-channel RS485-to-Ethernet serial server with dual RJ45 ports and PoE (IEEE 802.3af). Each of the eight RS485 channels operates independently; the rail-mount metal enclosure suits makes it easy to integrate into control cabinets.

$127.42 AUD, inc GST

Wio Terminal LoRaWan Chassis with Antenna- built-in LoRa-E5 and GNSS, EU868/US915

Brand: Seeed Studio
Features Powerful LoRa module: use extremely compact, and high-performance LoRa-E5 module Embedded LoRaWAN® protocol, AT command, support global...
$72.05 AUD, inc GST

Link.ONE with Unify Enclosure - LTE+NB-IoT+LoRaWAN (9xxMHz)

Brand: RAKwireless

A multi-protocol IoT node with LoRaWAN®, BLE 5.0 and LTE-M/NB-IoT in an IP65 enclosure.

$149.95 AUD, inc GST

SparkFun IoT Node for LoRaWAN®

Brand: Sparkfun
The SparkFun IoT Node for LoRaWAN® development board brings an entirely new level of usability to the often convoluted and configuration-intensive effort...
$189.95 AUD, inc GST

SenseCAP Wireless Light Intensity Sensor - LoRaWAN AU915 MHz

Brand: Seeed Studio
SenseCAP Wireless Light Intensity Sensor measures the intensity of light, which is designed in battery-powered and IP66 enclosure for outdoor use,...
$259.95 AUD, inc GST

SenseCAP Wireless Soil Moisture and Temperature Sensor - LoRaWAN AU915MHz

Brand: Seeed Studio
SenseCAP Wireless Soil Moisture and Temperature Sensor measures soil volumetric water content (VWC) and temperature. It incorporates a sensor, a custom...
$369.95 AUD, inc GST

RP2040-LoRa Development Board, Integrates SX1262 (With adapter board)

Brand: Waveshare
RP2040-LoRa Development Board, Integrates SX1262 RF Chip, Long-Range Communication, Options For Frequency Band, USB Port Adapter Board Optional...
$26.60 AUD, inc GST

SenseCAP A1102 - LoRaWAN Vision AI Sensor

Brand: Seeed Studio
A smart edge device that runs TinyML AI models locally, transmitting only inference results via LoRaWAN
$239.95 AUD, inc GST

Arduino Portenta Vision Shield - LORA

Brand: Arduino
The Portenta Vision Shield LoRa® brings industry-rated features to your Arduino Portenta. This hardware add-on will let you run embedded computer vision applications, connect wirelessly via LoRa® to the Arduino Cloud or your own infrastructure, and activate your system upon the detection of sound events.
$134.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.