Search results for: 'jst female cables'

This 10 cm (4") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...

This 63 cm (25") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...

This 40 cm (16") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...

This 2-conductor, 25 cm (10") cable has 24 AWG wires and 2-pin female JST PH-type connectors (2mm pitch) on both ends...

This 16 cm (6.3") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...

This 2-conductor, 25 cm (10") cable has 28 AWG wires and 2-pin female JST SH-type connectors on both ends...

This 5-conductor, 10 cm (4") cable has 24 AWG wires and 5-pin female JST PH-type connectors (2mm pitch) on both ends...

This 2-conductor, 10 cm (4") cable has 28 AWG wires and 2-pin female JST SH-type connectors on both ends...

This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. Adafruit are carrying these to match up...

This 12 cm (4.5") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

This 30 cm (12") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.

This 3-conductor, 10 cm (4") cable has 24 AWG wires and 3-pin female JST PH-type connectors (2mm pitch) on both ends...

This 25 cm (10") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...

This 5.5" (14cm) cable has two 26AWG conductors with a 2mm-pitch 2-pin female JST PH-style connector. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.

This 75 cm (30") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with female pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.

This 4-conductor, 63 cm (25") cable has 24 AWG wires and 4-pin female JST PH-type connectors (2mm pitch) on both ends...

This 4-conductor, 63 cm (25") cable has 28 AWG wires and 4-pin female JST SH-type connectors on both ends...

This 4-conductor, 12 cm (4.5") cable has 24 AWG wires and a 4-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

This 12-inch (30-cm) cable has 26 AWG wires with a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with male pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.

This 2-conductor, 12 cm (4.5") cable has 24 AWG wires and a 2-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

This 3-conductor, 75 cm (30") cable has 24 AWG wires and a 3-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

This 6-conductor, 10 cm (4") cable has 24 AWG wires and 6-pin female JST PH-type connectors (2mm pitch) on both ends...

This 600mm length 4-Pos JST cable has female connectors at both ends for conveying data between electronics in your project. It is the same.....

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

This 5-conductor, 30 cm (12") cable has 24 AWG wires and a 5-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. The cable insulation is...

This 4-conductor, 75 cm (30") cable has 28 AWG wires and a 4-pin female JST SH-type connector on one end. The other ends of the wires are unterminated;...

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.

This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...

This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead...

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with...

This 12-inch (30-cm) cable has 28 AWG wires and a 3-pin female JST ZH-style connector that mates with the 3-pin connector on Sharp GP2Y0A51 analog...

This 6-conductor, 75 cm (30") cable has 24 AWG wires and a 6-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" female header sockets on the end. Adafruit are carrying these to match...

These 5-wire cables are 168mm (6.6") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle...

By popular request - Adafruit now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable...

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...