2-Pin Female JST XH-Style Cable (15cm)

Rating:
94% of 100
SKU: POLOLU-1164 Brand: Pololu
This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
$1.95 AUD, inc GST
$1.77 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Fri, 19th of Apr

Quantity Discounts:

  • 10-25 $1.72 (exc GST)
  • 25+ $1.68 (exc GST)
- +

21 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Favourite product

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • $10+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This 6" (15cm) cable has two 26AWG stranded conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated and are stripped to expose approximately 5 mm of tinned copper; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.

2-Pin female JST XH-style connector.

Unterminated end of 2-Pin female JST XH-style cable (15cm).

These disconnectable crimp-style female connectors snap together securely with the three types of male JST XH-style connectors Pololu carry: straight, right angle, and right angle extended.

2.5 mm XH-style shrouded male connector: 2-pin, straight.

For a 2-pin cable with a smaller connector (2mm pitch), see Pololu's female JST PH-style cable.

You can use Pololu's male or female crimp pins and a 0.1" 2×1 crimp connector housing to make a connector for the unterminated end of the cable that is compatible with standard solderless breadboards and perfboards.

People often buy this product together with:

0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 25-Pack0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 25-Pack
2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Straight (4-Pack)2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Straight (4-Pack)
2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Right Angle (4-Pack)2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Right Angle (4-Pack)

File downloads

This product is listed in:

Cables>Cable Assemblies

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Days2Bin: Pico Powered Bin Reminder

Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...
Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...

Raspberry Pi Video Looper Display Installation | Overshare Video Festival

IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...
IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...

Mailbox Delivery Notification System

Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...
Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.