Search results for: 'isolated input'
Helpful resources
2
Industrial 8-Channel ESP32-S3 WiFi Relay Module (With POE)
Brand: Waveshare
Securely control inductive loads and execute complex automated logic directly from the edge. The Waveshare ESP32-S3-ETH-8DI-8RO-C integrates eight isolated 10A relays, an onboard CAN interface, and robust dual-core processing into a DIN-rail enclosure.
$84.25 AUD, inc GST
Industrial 8-Ch Digital Input & Output Module
Brand: Waveshare
Industrial 8-Ch Digital Input & Output Module, DC 7~36V Wide Voltage Power Supply, Modbus RTU Protocol, Multiple Isolation Protection Circuits, Rail-Mount...
$38.80 AUD, inc GST
Opto-isolator Breakout
Brand: Sparkfun
This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board electrically isolates a controller from the high-power system by use of an opto-isolator IC. This IC has two LEDs and two photodiodes built-in. This allows the low-voltage side to control a high voltage side.
$10.35 AUD, inc GST
4-Channel Level Converter (12V to 3.3V)
Brand: DFRobot
This 12V to 3.3V level converter module with 4-channel photoelectric isolation features common anode / common cathode / differential signal inputs. The...
$14.37 AUD, inc GST
2-Channel Isolated CAN Expansion HAT for Raspberry Pi, Dual Chips Solution
Brand: Waveshare
2-Channel Isolated CAN Bus Expansion HAT for Raspberry Pi, MCP2515 + SN65HVD230 Dual Chips Solution, Multi Onboard Protection Circuits...
$33.95 AUD, inc GST
Gravity: Analog Signal Isolator
Brand: DFRobot
The Analog Signal Isolator can isolate analog signal and provide isolated power to sensors. It can effectively prevent sensor signal interference and apply to multi-parameter...
$32.49 AUD, inc GST
4-Channel Level Converter (12V to 5V)
Brand: DFRobot
This 12V to 5V level converter module with 4-channel photoelectric isolation features common anode / common cathode / differential signal inputs. The...
$15.77 AUD, inc GST
2-Channel Level Converter (12V to 3.3V)
Brand: DFRobot
This 12V to 3.3V level converter module with 2-channel photoelectric isolation features common anode / common cathode / differential signal inputs. The...
$11.93 AUD, inc GST
Industrial 8-Channel RP2350 Relay Module (Ethernet + Isolated RS485)
Brand: Waveshare
Bring programmable switching to a DIN rail - high-power relays, isolated field inputs and a wired network connection in one unit.
$71.22 AUD, inc GST
2-Channel Isolated RS232 Expansion HAT
Brand: Waveshare
2-Channel Isolated RS232 Expansion HAT for Raspberry Pi, SC16IS752+SP3232 Solution, with Multi Onboard Protection Circuits
$26.55 AUD, inc GST
2-Channel Level Converter (12V to 5V)
Brand: DFRobot
This 12V to 5V level converter module with 2-channel photoelectric isolation features common anode / common cathode / differential signal inputs. The...
$11.93 AUD, inc GST
8-Channel Isolated Analog Data Acquisition Module
Brand: DFRobot
This is an 8-channel single-end 12-bit analog data acquisition module with an accuracy of up to ±1‰, supporting 0-5V, 1-5V, 0-2.5V, 0-20mA, 4-20mA ranges. It can...
$132.13 AUD, inc GST
Pololu I²C Isolator with Connectors, ISO1640
Brand: Pololu
This module enables galvanically isolated bidirectional I²C communication between two devices. The bidirectionality applies to both SDA and SCL, which...
$9.70 AUD, inc GST
Pololu I²C Isolator, ISO1640
Brand: Pololu
This module enables galvanically isolated bidirectional I²C communication between two devices. The bidirectionality applies to both SDA and SCL, which...
$7.95 AUD, inc GST
RevPi Digital IO modules - DI
Brand: Pimoroni
Expand your Revolution Pi system by adding digital I/O expansion modules.
$344.95 AUD, inc GST
M-DUINO 21 I/Os PLUS (Optoisolated Output)
Brand: DFRobot
This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the...
$450.03 AUD, inc GST
PWRCAN 13.2 Module: Isolated 2-Ch CAN & 1-Ch RS485
Brand: M5Stack
CAN- or RS485-controlled GPIO - great for robots or protocol conversion.
$47.50 AUD, inc GST
DMX512 Lighting Programming Controller for Arduino and ESPHome
Brand: DFRobot
The EDGE102-DMX512 is a versatile DMX512 lighting controller compatible with Arduino and ESPHome, ideal for stage lighting, DJ shows, parties, and clubs...
$109.85 AUD, inc GST
M-DUINO PLC Arduino Ethernet 19R I/Os (Relay Output)
Brand: DFRobot
This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the...
$617.72 AUD, inc GST
RevPi AIO - Analog IO expansion module
Brand: Pimoroni
Using the analog I/O module RevPi AIO your RevPi base module can be expanded by 4 analog inputs, 2 analog outputs and 2 RTD input channels.
$714.95 AUD, inc GST
RevPi Digital IO modules - DO
Brand: Pimoroni
Expand your Revolution Pi system by adding digital I/O expansion modules.
$369.95 AUD, inc GST
RevPi Digital IO modules - DIO
Brand: Pimoroni
Expand your Revolution Pi system by adding digital I/O expansion modules.
$419.95 AUD, inc GST
5V Single Channel Relay Module 10A
Brand: Core Electronics
A versatile, compact relay board that can drive up to 10A @28VDC while only drawing approximately 60mA at 5V.
$3.95 AUD, inc GST
5V 4 Channel Relay Module 10A
Brand: Core Electronics
A versatile relay board with opto-isolated inputs. Each channel can switch up to 10A @28VDC
$6.40 AUD, inc GST
5V 2 Channel Relay Module 10A
Brand: Core Electronics
A versatile relay board with opt-isolated inputs. Each channel can drive up to 10A @28VDC
$5.70 AUD, inc GST
USB to RS485/422 Isolated Converter
Brand: Waveshare
USB to RS485/422 Industrial Grade Isolated Converter, Onboard Original FT232RL and SP485EEN, Multiple Protection, Wall-mount and Rail-Mount Support...
$30.80 AUD, inc GST
USB Isolator
Brand: Core Electronics
Keep your computer protected from accidental shorts or connecting the wrong power wire.
$21.75 AUD, inc GST
Pololu Isolated Solid State Relay/Switch, SPST, 30V, 11A
Brand: Pololu
This solid state relay/switch board provides a way to make and break an electrical connection based on a 2.7 V to 40 V input signal. Its electrically...
$7.90 AUD, inc GST
2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi
Brand: Waveshare
2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi, Dual Chips Solution, Stackable Design For Expanding Multiple CAN Channels, Built-In Multi...
$41.25 AUD, inc GST
Gravity: Active Isolated RS485 to UART Signal Converter Module
Brand: DFRobot
isolated RS485 to UART signal transfer module comes with protection circuits such as power isolation and TVS...
$32.65 AUD, inc GST
Pololu Isolated Solid State Relay/Switch, SPST, 60V, 7A
Brand: Pololu
This solid state relay/switch board provides a way to make and break an electrical connection based on a 2.7 V to 40 V input signal. Its electrically...
$6.55 AUD, inc GST
Olimex USB-ISO-HS High-Speed USB Isolator
Brand: The Pi Hut
The Olimex USB-ISO-HS is a USB High-Speed isolator and provides galvanic isolation between the USB host and device and protects the device from power shocks...
$74.40 AUD, inc GST
Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections
Brand: Waveshare
Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections...
$36.05 AUD, inc GST
Industrial Isolated USB To 4-Ch RS485 Converter (B)
Brand: Waveshare
USB-to-RS485 converter with four isolated channels and built-in surge and ESD protection, for stable multi-OS communication in an aluminium alloy case.
$40.10 AUD, inc GST
2 Channel Solid State Relay Module (DC Control, AC Load)
Brand: Core Electronics
This breakout module gives you access to a 2 channel solid state relay that can be switched with 3-5VDC
$5.40 AUD, inc GST
Pololu I²C Isolator with Isolated Power and Connectors, ISO1640, MIE1W0505BGLVH, 5V/3.3V, 200mA
Brand: Pololu
This module enables galvanically isolated bidirectional I²C communication between two devices while supplying regulated, isolated power to the target. The...
$16.70 AUD, inc GST
Pololu Isolated USB-to-I²C Adapter with Isolated Power
Brand: Pololu
This USB-to-I²C adapter enables a PC or other USB host to act as the controller on an I²C bus, reading and writing data from I²C target devices connected...
$24.60 AUD, inc GST
RS485 Expansion HAT for Raspberry Pi - 2-Channel Isolated
Brand: Waveshare
This is a 2-channel isolated RS485 expansion HAT designed for Raspberry Pi, adopts the SC16IS752+SP3485 solution, with embedded protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc.
$31.85 AUD, inc GST
USB TO 8CH RS485 Industrial Grade Isolated Converter
Brand: Waveshare
USB TO 8CH RS485 Industrial Grade Isolated Converter, USB To RS485 Adapter, Multiple Protection Circuits, Wall-mount and Rail-Mount Support, Multi-OS...
$58.70 AUD, inc GST
Waveshare ESP32-S3 WLED LED Strip Controller (Isolated RS485, Audio)
Brand: Waveshare
Run WLED lighting effects from a tidy DIN rail enclosure, with isolated RS485 and onboard audio for smart-lighting and sparkly industrial builds.
$37.60 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.