Search results for: &#039;gravity vibration motor module for arduino&#039;

The vibration motor is very similar to the device that makes your cellphone shake when you get a text. With this module, you can make anything vibrate and buzz! This module also includes the vibeSnap-- an accessory that helps you attach stuff - like paper, tin foil, or a pipecleaner - to the motor.

littleBits Vibration Motor

Brand: LittleBits

$24.99 AUD, inc GST $25.95

These tiny little vibration motors are excellent for getting your project noticed without sound or light.

Mini vibration motor 2.7mm (Seeed Studio)

Brand: Seeed Studio

$2.70 AUD, inc GST

Specifications Operating Voltage: 2.2 ~ 3.6V DC Rated Voltage: 3.0V DC Rated Speed: 12,000 @ 2,500rpm Rated Current: 90mA max Stall Current: 120mA max...

Mini vibration motor (Seeed Studio)

Brand: Seeed Studio

$5.15 AUD, inc GST

Out of stock

*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs...

Vibrating Mini Motor Disc

Brand: Adafruit

$3.90 AUD, inc GST

Gravity: MOSFET Power Controller

In most Arduino projects, relays are the first choice to drive some large current device. It requires a certain amount of current to drive the internal coil to pick-up...

$6.58 AUD, inc GST

Shaftless Vibration Motor 10x3.4mm

This tiny, button-type, vibrating motor shakes with a vibration amplitude of 0.75g and draws approximately 60 mA when 3 V is applied to its leads. The shaftless design keeps this motor small: 10 mm in diameter and 3.4 mm in height.

$11.50 AUD, inc GST

3-5V Shaftless Vibration Motor - 10 x 3.7mm

Brand: Core Electronics

This 10mm diameter 3-5V shaftless vibration motor can be used to easily buzz attached components with low power draw and attached gel adhesive on the back.

$2.25 AUD, inc GST

The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors...

Adafruit DRV2605L Haptic Motor Controller

Brand: Adafruit

$15.70 AUD, inc GST

Gravity: Haptic Motor Driver for LRA Motors

Gravity: haptic motor Ddriver module for Linear Resonant Actuator (LRA) motors based on the TM6605 chip. Features a Gravity I2C interface, 44 built-in...

$8.99 AUD, inc GST

A vibration motor! This itty-bitty, shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.6V operating range, these units shake crazily at 3V. Once anchored to a PCB or within a pocket, the unit vibrates softly but noticeably. This high quality unit comes with a 3M adhesive backing and reinforced connection wires.

Vibration Motor

Brand: Sparkfun

$5.10 AUD, inc GST

Gravity: IO Expansion Shield for Arduino V7.1

The new IO Expansion Shield V7 has arrived,from the best selling family of IO expansion shield for Arduino. For the past few years these expansion shields have been aiding thousands of makers to create,to expand, to share their sparkles of idea and ingenuity, and now comes the young V7.

$8.43 AUD, inc GST

Vibration Motor 11.6×4.6×4.8mm

This tiny DC motor has a shaft with an offset mass that vibrates when it rotates. Motors like this are commonly found in cell phones and other devices that use vibration for tactile feedback. The motor has 1.5″ leads and is encased in a removable rubber sleeve that gives it flat surfaces for mounting and prevents it from chattering against whatever it is mounted to. It is intended for operation around 3 V (2.4 V to 3.5 V recommended).

$11.50 AUD, inc GST

Gravity: Digital Sensor Cable for Arduino - 30cm (10 Pack)

The digital sensor cables are especially designed for the DFRobot popular IO Expansion shield and sensors. It connects most of their digital sensor to the IO board.

This price includes 10 pieces of cables.

$9.49 AUD, inc GST

Gravity: Analog Sensor Cable for Arduino - 50cm (10 Pack)

This high-quality 50cm analog sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially...

$11.18 AUD, inc GST

Shaftless Vibration Motor 8x3.4mm

$11.70 AUD, inc GST

Gravity: Easy Relay Module

The traditional relay module has complicated wiring and is not friendly to beginners or students. The simple switch module simplifies the wiring method for connecting...

$13.66 AUD, inc GST

Gravity: 4 Channel Relay Shield for Arduino

This DFRoobot relay shield V2.1 is a completely new desgin which is capable of controlling 4 relays. The max switching power could be DC 90W or AC 360VA.

$25.18 AUD, inc GST

High-Power Simple Motor Controller G2 18v15

This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five...

$219.95 AUD, inc GST

Study Pack with HUSKYLENS and micro:bit V2

The Study Pack of HUSKYLENS for micro:bit is an HuskyLens extension kit based on micro:bit programming. It is suitable for students aged 8-19. Centered...

$194.81 AUD, inc GST

Shaftless Vibration Motor 10x2.0mm

$11.70 AUD, inc GST

Gravity: IO Expansion & Motor Driver Shield

Gravity IO Expansion Shield with Motor Driver is a new product designed for Arduino Boards. It combines IO Expansion Shield and DC Motor Driver Shield, equipped...

$26.74 AUD, inc GST

Gravity 4Pin Sensor Adapter

This is Gravity 4Pin sensor adapter which is special designed for 4Pin sensor. We have optimized its connection interface to make it compatible with gravity interface...

$5.22 AUD, inc GST

Gravity: Digital Sensor Cable for Arduino - 50cm (10 Pack)

This high-quality 50cm digital sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially...

$11.18 AUD, inc GST

Similar matches

28BYJ-48 Stepper Motor Module with Driver for STEM Robotics (5V, 0.9 kgf·cm)

The all-in-one 28BYJ-48 stepper motor module with an integrated driver. Its plug-and-play 4-pin interface is perfect for Arduino classroom projects...

$19.15 AUD, inc GST

Out of stock

Digital Vibration Sensor

This vibration sensor, as its name suggests, is capable of detecting weak vibration signals.

$4.49 AUD, inc GST

Micro DC Geared Motor w/Encoder-SJ01 (6V 160RPM 120:1)

This is the DFRobot Micro DC geared motor with encoder. It is a motor with a 120:1 gearbox and an integrated quadrature encoder that provides a resolution of 16 pulse single per round giving a maximum output of 1920 within one round. With an Arduino controller and motor driver, applications for this include a closed-loop PID control or PWM motor speed control. This motor is an ideal option for mobile robot projects. The copper output shaft, embedded thread and reinforced connector greatly extends the motor's service life.

$12.52 AUD, inc GST

Gravity: N20 Micro Metal Gear Motor with Integrated Drive (3V-6V, 1:150/133RPM)

Gravity: N20 Miniature Metal Motor is a simplified motor control with integrated drive, PWM servo control, and low power consumption. Ideal for robots,...

$14.60 AUD, inc GST

Bipolar Stepper Motor with Planet Gear Box (18kg.cm)

This is a bipolar stepper motor with a planetary gearbox (gear ratio: 5.18) and uses a standard 8mm-diameter D type output shaft, with a 1.8° step angle (200 steps/revolution).

$65.93 AUD, inc GST