Search results for: 'serial interface display'
Showing results for serial interface display
7 Segment Display (2-Wire, 0.5")
Brand: Core Electronics
Perfect for when you need to display the time or some simple sensor read-outs, all with two pins!
$1.95 AUD, inc GST
MAX7219 Serial Dot Matrix Display Module
Brand: Core Electronics
These modules can be mounted flush side-by-side to extend them far beyond the 8x8 matrix. For example, you could have a 8x32 matrix! At the core is a MAX7219 - a very well documented chip in the Arduino community (along with ever other flavour of micro controller).
$2.40 AUD, inc GST
I2C/TWI LCD2004 Module (Arduino/Gadgeteer Compatible)
Brand: DFRobot
I2C/TWI LCD2004 module compatible with Gadgeteer is a cool lcd display with a high speed I2C serial bus (400kHz) from DFRobot. With the limited pin resources, your project may be out of resources using normal LCD shield. The LCD display is a 4x20 character STN white display with a blue LED backlight.
$27.55 AUD, inc GST
7-Segment Serial Display - Blue
Brand: Sparkfun
4-digit 7-segment displays are really neat little devices, it’s a shame that they can be so cumbersome to control. Well we’ve solved that problem by making them a little bit “smarter.” The 7-Segment Serial Display combines a classic 4-digit 7-segment display and an ATMega328 microcontroller allowing you to control every segment individually using only a few serial lines.
$28.45 AUD, inc GST
SparkFun 16x2 SerLCD - RGB Backlight (Qwiic)
Brand: Sparkfun
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display...
$65.10 AUD, inc GST
SparkFun 20x4 SerLCD - RGB Backlight (Qwiic)
Brand: Sparkfun
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Crystal Display...
$84.25 AUD, inc GST
Serial Enabled LCD Kit
Brand: Sparkfun
Calling this the “Serial Enabled LCD Kit” doesn’t do justice to how cool it actually is. After you’ve assembled this all-PTH kit, you’ll be left with a fully Arduino-compatible development board that just happens to have a white on black 16x2 display built-in.
$47.70 AUD, inc GST
Monk Makes 7 Segment for micro:bit
Brand: Monk Makes
The 7-segment for micro:bit is a four digit 7-segment display for micro:bit. You can use it to display numbers, but it can also display letters and other characters, albeit with the limits imposed by the 7 segments of each digit.
$21.95 AUD, inc GST
SparkFun 16x2 SerLCD - RGB Text (Qwiic)
Brand: Sparkfun
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 RGB on Black Liquid Crystal Display...
$64.50 AUD, inc GST
TIMI-Click Starter Kit
Brand: Sparkfun
TIMI Click is a 0.96” TFT LCD display module that is driven directly by a PIXXI-28 graphics processor from 4D Labs...
$89.50 AUD, inc GST
3-Wire LED Module 8 Digital (Arduino Compatible)
Brand: DFRobot
This is 8 digital bits serial LED display. It features a flick free display and 3-Wire interface which allows more than 2 modules can be serial linked. With our interface shield, this module can be plug and play.
$17.95 AUD, inc GST
White I2C 16x02 LCD Display (White on Blue, 3/5V)
Brand: Waveshare
LCD1602 I2C Module, White color with blue background, 16x2 characters LCD, 3.3V/5V...
$12.25 AUD, inc GST
Gravity: I2C 16x2 Arduino LCD with RGB Font Display (Black)
Brand: DFRobot
Accustomed to the same LCD screen, do you want to have a different experience? DFRobot LCD1602 will bring you a new visual feeling, It is not the same as the previous...
$20.30 AUD, inc GST
Raspberry Pi e-ink Display Module
Brand: DFRobot
This Raspberry Pi e-ink display module comes with a 2.13” screen with a resolution of 250×122, adopting SPI interface to communicate with Raspberry Pi. It leads...
$40.45 AUD, inc GST
USB + Serial Backpack Kit with 16x2 RGB backlight negative LCD - RGB on Black
Brand: Adafruit
Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed PCB sits on the...
$47.10 AUD, inc GST
Adafruit USB + Serial LCD Backpack Add-On with Cable
Brand: Adafruit
Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed PCB can connect...
$22.95 AUD, inc GST
I2C RGB Backlight LCD 16x2 Display Module for Arduino (Black Text)
Brand: DFRobot
This product includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD and Analog Pin 0 is used to read the work status of five pushbuttons.
$23.50 AUD, inc GST
Similar matches
1.69inch LCD Display Module (SPI, 240x280)
Brand: Waveshare
1.69inch LCD Display Module, 240×280 Resolution, SPI Interface, IPS, 262K Colors
$15.70 AUD, inc GST
LCD1602 RGB Module, 16x2 Characters LCD, RGB Backlight, 3.3V/5V, I2C Bus
Brand: Waveshare
Adjustable RGB Backlight Color, I2C Communication, 3.3V/5V Compatible. Supports Raspberry Pi / Pi Pico, Jetson Nano, and Arduino...
$20.30 AUD, inc GST
Monochrome 0.96 128x64 I2C/SPI OLED Display
Brand: DFRobot
This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default...
$23.75 AUD, inc GST
Arduino Giga Display Bundle
Brand: Arduino
Elevate your maker experience with the Arduino GIGA R1 WiFi and GIGA Display Shield Bundle, a powerhouse combination designed for ambitious creators ready to unleash their imagination and bring innovative projects to life.
$209.95 AUD, inc GST
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
Brand: Waveshare
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface...
$46.40 AUD, inc GST
e-ink Display Module for ESP32
Brand: DFRobot
This is an ESP32-integrated 2.13”e-ink display with built-in WiFi and Bluetooth functions that can connect to Alibaba Cloud to achieve remote display control. It...
$42.95 AUD, inc GST
8x16 Matrix LED Display Module for Arduino
Create amazing patterns or messages with this LED matrix module. It features 128 bright blue LEDs arranged in an 8 x 16 grid, brightness control, and communicates to your microcontroller via I2C.
$23.50 AUD, inc GST
i2c / SPI character LCD backpack
Brand: Adafruit
LCDs are a fun and easy way to have your microcontroller project talk back to you. LCD backpacks reduce the number of pins needed to connect to an LCD.
$19.30 AUD, inc GST
Bus Pirate v3.6 universal serial interface (Seeed Studio)
Brand: Seeed Studio
Bus Pirate v3 is a universal bus interface that talks to electronics from a PC serial terminal. Get to know a chip without writing code. Eliminates a ton...
$58.60 AUD, inc GST
Turing Complete Labs 10 Digit Monochrome LCD Display - STEMMA QT / Qwiic
Brand: Adafruit
Those crisp digital displays from your calculator can now be incorporated into your next project with this handy 10 Digit Monochrome LCD Display from...
$40.65 AUD, inc GST
Basic 16x2 Character LCD - White on Black 5V
Brand: Sparkfun
This is a basic 16 character by 2 line display with a snazzy black background with white characters. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes white LED backlight.
$43.45 AUD, inc GST
Custom DE-9 Serial Interface Terminal Block Breakout Connector
Brand: Core Electronics
Streamline your custom DE-9 serial projects with our Terminal Block Breakout Connector. Ideal for DIY enthusiasts, it features a secure casing, easy-to-use screw terminals, and the flexibility to modify connections as needed. Explore the possibilities for your electronics designs.
$14.60 AUD, inc GST
4-digit 8-segment Display Module for Raspberry Pi Pico
Brand: Waveshare
Easy to drive, SPI-compatible 8-segment timer for Raspberry Pi Pico, includes pre-soldered headers, with a variety of resources available.
$6.70 AUD, inc GST
SparkFun Basic 16x2 Character LCD - White on Black, 5V (with Headers)
Brand: Sparkfun
This is a basic 16 character by two line display with a snazzy black background with white characters. This LCD utilizes the extremely common HD44780 parallel interface...
$41.70 AUD, inc GST
Adafruit 2.13 Tri-Color eInk / ePaper Display with SRAM - Red Black White
Brand: Adafruit
Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one...
$39.35 AUD, inc GST
Adafruit 2.13" 250x122 Quad-Color eInk / ePaper Display w/ SRAM
Brand: Adafruit
Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a quad-color eInk display. Chances are...
$35.30 AUD, inc GST
TLC5940 Breakout
Brand: Sparkfun
The TLC5940 is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable serial interface. This breakout board is a good way to take full advantage of this useful IC. All 16 PWM channels are broken out to standard 0.1" headers, which run alongside convenient voltage and ground rails. Also, because the TLC5940 can be daisy-chained, the breakout is designed to support that feature. On the left-hand side of the board all serial inputs are broken out to 0.1" headers and likewise with output on the right-hand side.
$35.50 AUD, inc GST
Adafruit 2.13 250x122 Tri-Color eInk / ePaper Display with SRAM - SSD1680 Driver
Brand: Adafruit
Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!
$35.35 AUD, inc GST
Adafruit 1.54 Tri-Color eInk / ePaper 200x200 Display with SRAM - SSD1681 Driver
Brand: Adafruit
Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!
$34.90 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.