Search results for: &#039;7 inch display serial interface&#039;

7inch DSI Capacitive Touch Display for Raspberry Pi

7inch Capacitive Touch Display For Raspberry Pi, 800×480, DSI Interface

$80.75 AUD, inc GST

Display your projects proudly with the Raspberry Pi Touch Display 2, featuring a vibrant 7" portrait-native screen with 720x1280 resolution and true multi-touch capability. Experience seamless interaction with 5-finger touch support and an impressive 85-degree viewing angle, perfect for DIY projects and custom interfaces.

$105.69 AUD, inc GST

7" Touch Display Kit For Raspberry Pi Zero, (1024×600 pixel touch screen)

7" Touch Display Kit for Raspberry Pi Zero, with IPS display Expansion Board, 1024×600, 5-point Capacitive Touch...

$92.45 AUD, inc GST

52Pi 7 Inch HDMI IPS Display (1024x600px)

Brand: 52Pi

A 7-inch IPS display, 1024x600 at 60Hz, great colour and high contrast; USB-C power and full-size HDMI.

$94.95 AUD, inc GST

7 HDMI Display with Capacitive Touchscreen

This is a 7" HDMI display with a capacitive touchscreen.

$140.49 AUD, inc GST

Waveshare 7inch IPS Raw Display with Adapter board (1024 × 600 Pixels)

7inch IPS/QLED Integrated Display, 1024 × 600, Thin and Light Design...

$65.60 AUD, inc GST

7inch DSI Capacitive Touch Display (1280×800, IPS Panel)

Ten-point touch, wide-gamut colour and a toughened glass front, all driven from a single DSI ribbon on your Raspberry Pi.

$112.55 AUD, inc GST

This deluxe serial port adapter (RS-232 adapter) converts logic-level signals to the higher voltages required for RS-232 and similar serial ports. Unlike competing units, the Pololu serial adapter operates over a 3-5.5 V supply range and gives you access to all eight of the signal lines available on a DB9 connector, including five transmit lines and three receive lines.

Pololu 23201a Serial Adapter Fully Assembled

Brand: Pololu

$28.40 AUD, inc GST

7.0 40-pin TFT Display - 800x480 without Touchscreen

This 7.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly...

$61.40 AUD, inc GST

RA8875 Driver Board for 40-pin TFT Touch Displays - 800x480 Max

Have you gazed longingly at large TFT displays - you know what I'm talking about here, 4", 5" or 7" TFTs with up to 800x480 pixels. Then you look at your Arduino...

$68.30 AUD, inc GST

7.5" 800x480 Monochrome eInk / ePaper - Bare Display - UC8197 Chipset

E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY...

$114.95 AUD, inc GST

Out of stock

7 inch DVI Display Module for Raspberry Pi Pico

7/10.1 inch DVI Display Module for Raspberry Pi Pico, IPS panel, 1024×600 Pixel, DVI interface Communication...

$50.95 AUD, inc GST

HDMI 7 800x480 Display Backpack - With Touchscreen

Its a mini panel-mountable HDMI monitor with a built-in touchscreen! So small and simple, you can use this display with any computer that has HDMI output, and the...

$174.95 AUD, inc GST

Add exciting new dimensions to your project with this large full-color display. All you need to do is power your LattePanda board and you have a visual user interface for your project - no extra power cables required! The border of the display is insulated with black tape so that even without and enclosure there is no possibility of a short-circuit. The picture below shows LattePanda directly powering the 7" display.

7-inch 1024x600 IPS Display for LattePanda

Brand: LattePanda

$74.26 AUD, inc GST

A 7-inch HDMI monitor with driver-free capacitive touch, delivering bright 1024×600 visuals, ten-point multi-touch and dual USB host ports for expansion.

7 inch 1024x600 Capacitive TouchScreen

Brand: Seeed Studio

$219.95 AUD, inc GST

7" eDP IPS Touch Narrow Bezel Display for LattePanda IOTA / LattePanda 3 Delta

Experience seamless control with the official 7" eDP touch display for LattePanda IOTA & 3 Delta. Features a 1024x600 IPS panel, perfect for portable HMI....

$124.09 AUD, inc GST

Adafruit USB + Serial LCD Backpack Add-On with Cable

Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed PCB can connect...

$22.95 AUD, inc GST

Out of stock

Similar matches

7 Segment Display (2-Wire, 0.5")

Brand: Core Electronics

Perfect for when you need to display the time or some simple sensor read-outs, all with two pins!

$1.95 AUD, inc GST

These modules can be mounted flush side-by-side to extend them far beyond the 8x8 matrix. For example, you could have a 8x32 matrix! At the core is a MAX7219 - a very well documented chip in the Arduino community (along with ever other flavour of micro controller).

MAX7219 Serial Dot Matrix Display Module

Brand: Core Electronics

$2.40 AUD, inc GST

0.71inch Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K colors

0.71inch Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K colors...

$16.80 AUD, inc GST

1.69inch Round LCD Display Module with Touch Panel

1.69inch Round LCD Display Module with Touch panel, Micro LCD Display, 240×280 Resolution, IPS, SPI And I2C Communication, 262K Display Color...

$25.20 AUD, inc GST

This slim display panel is perfect for bringing a little polish to a project. It will take HDMI, VGA and even composite video so it's very maker-friendly - perfect for a plug-and-play Raspberry Pi display. An included button panel plugs into the driver-board and gives you access to an on-screen menu similar to that of a computer monitor.

10.1inch Highlight IPS Digital LCD Screen with driver board

Brand: Core Electronics

$139.95 AUD, inc GST

5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface

5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface...

$46.40 AUD, inc GST

This monochrome white OLED display features a standard SH1106 SPI interface and a 128×64-pixel resolution. With an active area measuring 1.3" diagonally,...

Graphical OLED Display: 128x64, 1.3", White Pixels, SPI, Black PCB

Brand: Pololu

$33.10 AUD, inc GST

1.83inch LCD Display Module, 240×280 Resolution, SPI Interface, IPS LCD, 65K Colors, Rounded Corners, Micro LCD Display

1.83inch LCD Display Module, 240×280 Resolution, SPI Interface, IPS LCD, 65K Colors, Rounded Corners, Micro LCD Display...

$15.70 AUD, inc GST

Monochrome 1.3" 128x64 OLED graphic display - STEMMA QT / Qwiic

These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white...

$34.65 AUD, inc GST

Standard LCD 20x4 + extras - white on blue

Standard HD44780 LCDs are useful for creating standalone projects. 20 characters wide, 4 rows White text on blue background Connection port is 0.1" pitch, single...

$38.95 AUD, inc GST

Monochrome 0.91”128x32 I2C OLED Display with Chip Pad

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length...

$16.13 AUD, inc GST

Display meaningful output from your micro:bit project with the Kitronik :VIEW Graphics128 OLED display. Add a monochrome 128x64 display to the BBC...

Kitronik :VIEW Graphics128 OLED display 128x64 for BBC micro:bit

Brand: Kitronik

$26.80 AUD, inc GST

Adafruit 1.2 4-Digit 7-Segment Display w/I2C Backpack - Red

What's better than a single LED? Lots of LEDs! A fun way to make a numeric display is to use a 4-digit 7-segment display. LED matrices like these are 'multiplexed'...

$37.40 AUD, inc GST

0.96"160x80 Color SPI TFT Display

This 0.96”TFT display employs edge-to-edge design and offers glorious 160×80HD 16-bit color display, which can be suitable for wearable projects, mobile...

$14.06 AUD, inc GST

This is a basic, 4-digit 7-segment display - blue in color. It has a common anode. The display features one decimal point per digit, and individually controllable apostrophe and colon points.

7-Segment Display - 4-Digit (Blue)

Brand: Sparkfun

$10.30 AUD, inc GST

4-digit 7-segment displays are really neat little devices, it’s a shame that they can be so cumbersome to control. Well we’ve solved that problem by making them a little bit “smarter.” The 7-Segment Serial Display combines a classic 4-digit 7-segment display and an ATMega328 microcontroller allowing you to control every segment individually using only a few serial lines.

7-Segment Serial Display - Blue

Brand: Sparkfun

$28.45 AUD, inc GST

This is a basic, 4-digit 7-segment display - white in color. It has a common anode. The display features one decimal point per digit, and individually controllable apostrophe and colon points.

7-Segment Display - 4-Digit (White)

Brand: Sparkfun

$10.90 AUD, inc GST

4.2" 300x400 Monochrome or 4-Gray eInk / ePaper - Bare Display - SSD1683

E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY...

$43.95 AUD, inc GST

5" 800x480 TFT Raspberry Pi DSI Touchscreen

This is a 5" Raspberry Pi LCD touchscreen with 800*480 resolution and 108×64.8mm display area. The product uses the Raspberry Pi DSI display interface

$89.83 AUD, inc GST

2.13" 250x122 Quad-Color eInk / ePaper - Bare Display

What's better than our tri-color E-Paper displays? Quad-color of course! This is a 2.13" 250x122 Quad-Color eInk / ePaper Bare Display. Chances...

$17.45 AUD, inc GST

Out of stock