Search results for: 'display serial interface cable'

17 results

Raspberry Pi Display FPC Adapter Cable 200mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current DSI-connected display products.

$1.83 AUD, inc GST

Raspberry Pi Display FPC Adapter Cable 300mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current DSI-connected display products.

$3.55 AUD, inc GST

22-pin 0.5mm pitch FPC Flex Cable for DSI CSI or HSTX - 20cm

Brand: Adafruit
Connect this to that when a 22-pin FPC connector is needed. This 20 cm long cable is made of a flexible PCB. It's A-B style, meaning that pin one on...
$1.85 AUD, inc GST

Raspberry Pi Display FPC Adapter Cable 500mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current DSI-connected display products.

$5.38 AUD, inc GST

22-pin 0.5mm pitch FPC Flex Cable for DSI CSI or HSTX - 10cm

Brand: Adafruit
Connect this to that when a 22-pin FPC connector is needed. This 10 cm long cable is made of a flexible PCB. It's A-B style, meaning that pin one on...
$1.85 AUD, inc GST

22-pin 0.5mm pitch FPC Flex Cable for DSI CSI or HSTX - 5cm

Brand: Adafruit
Connect this to that when a 22-pin FPC connector is needed. This 5 cm long cable is made of a flexible PCB. It's A-B style, meaning that pin one on...
$1.85 AUD, inc GST

Adafruit CSI or DSI Cable Adapter Thingy for Raspberry Pi

Brand: Adafruit
Every time someone posts on the Adafruit forums and says they wish they had a way to adapt between the 15-pin 1mm pitch Camera (CSI) or Display (DSI)...
$4.80 AUD, inc GST

Adafruit CSI or DSI Cable Extender Thingy for Raspberry Pi

Brand: Adafruit
Every time someone posts on the Adafruit forums and says they need to have a really long cable for their Pi Camera (CSI) or Pi Display (DSI), Adafruit say, "Oh you mean...
$5.95 AUD, inc GST

Compute Module DSI Display Adapter

Brand: Waveshare
22PIN To 15PIN, Allowing The Compute Module To Use 15PIN DSI Displays
$4.90 AUD, inc GST

30PIN 15CM FPC Cable for LattePanda Alpha & Delta eDP Display

Brand: DFRobot

The cable was specially designed for LattePanda Alpha & Delta 7inch eDP display. With high flexibility and ultra-thin design, it perfectly transmit the video signal.

$4.95 AUD, inc GST
Similar matches

Arducam CSI to HDMI Cable Extension Module

Brand: Arducam

The CSI-HDMI adapter board is designed for Raspberry Pi Camera Module 3/V1/V2/HQ,  to extend the camera over the long cables while keeping the high-speed CSI signals away from noise and interference.

$23.25 AUD, inc GST

MAX7219 Serial Dot Matrix Display Module

Brand: Core Electronics
These modules can be mounted flush side-by-side to extend them far beyond the 8x8 matrix. For example, you could have a 8x32 matrix! At the core is a MAX7219 - a very well documented chip in the Arduino community (along with ever other flavour of micro controller).
$2.40 AUD, inc GST

1.69inch LCD Display Module (SPI, 240x280)

Brand: Waveshare
1.69inch LCD Display Module, 240×280 Resolution, SPI Interface, IPS, 262K Colors
$15.70 AUD, inc GST

7-Segment Serial Display - Blue

Brand: Sparkfun
4-digit 7-segment displays are really neat little devices, it’s a shame that they can be so cumbersome to control. Well we’ve solved that problem by making them a little bit “smarter.” The 7-Segment Serial Display combines a classic 4-digit 7-segment display and an ATMega328 microcontroller allowing you to control every segment individually using only a few serial lines.
$28.45 AUD, inc GST

Adafruit USB + Serial LCD Backpack Add-On with Cable

Brand: Adafruit
Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed PCB can connect...
$22.95 AUD, inc GST

Micro B USB Cable with LCD Voltage / Current Display

Brand: Adafruit
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting any development board, microcontroller, mobile phone, or other device...
$25.90 AUD, inc GST

Serial Enabled LCD Kit

Brand: Sparkfun
Calling this the “Serial Enabled LCD Kit” doesn’t do justice to how cool it actually is. After you’ve assembled this all-PTH kit, you’ll be left with a fully Arduino-compatible development board that just happens to have a white on black 16x2 display built-in.
$47.70 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.