Search results for: '2.42 inch oled display'

Looking for an OLED display to add to your DIY projects? Check out our White I2C OLED display with a 0.96-inch screen and 3.3V input compatibility. Easily print text and draw shapes with this go-to maker display using the SSD1306 driver.

Display text, draw shapes, animations, and even create plots.

Add a split colour display to your project, perfect for menu's and displaying data.

1.3" OLED Display module an Embedded SH1107 Driver, Using SPI/I2C Bus.

This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default...

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length...

These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white...

These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white...

This monochrome white OLED display features a standard SH1106 SPI interface and a 128×64-pixel resolution. With an active area measuring 1.3" diagonally,...

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length...

Here is the Zio Qwiic 1.5inch 128 x 128 pixels OLED display module. It can display a maximum of 16 lines of text content, and display pictures and animation on its...

The SparkFun Qwiic OLED Display can display up to four lines of text and features 128x32 pixels in a small 0.91in. (diagonal) frame...

This OLED goes out to all the fans who want more pixels! Normally Adafruit's 128x64 OLEDs are the biggest ones Adafruit have stocked that can use I2C. This one is a whopping 128x128 pixels and it even has an extra bonus - it can do grayscale pixels! Yep, you get the same crispness of a monochome OLED but with 16 levels of grayscale.

The SparkFun Qwiic OLED 1.3in. is a Qwiic-enabled monochrome OLED that displays crisp white-on-black images and text...

Discover the Argon POD Display 2.8 inch - a sleek, feature-rich addition to the POD Ecosystem, boasting a capacitive touch display, 4 programmable buttons, and an inbuilt IR receiver. Designed for the Zero 2 W.

Display meaningful output from your micro:bit project with the Kitronik :VIEW Graphics128 OLED display. Add a monochrome 128x64 display to the BBC...

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing 128x64 OLED: it adds a gorgeous 128x64 monochrome OLED...

The Grove - OLED Display 1.12 V3.0 (SH1107) is a monochrome display with 128*128 resolution. It has a lower price, user-friendly design and better...

If you're looking for the most compact lil' display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit 128x32...

The Grove - OLED Display 0.66" (SSD1306) is a monochrome display with 64×48 resolution. It contains a user-friendly design and outstanding performance with Grove I2C interface in 20mm×20mm ultra-small size.

Grove - OLED Display 0.96" is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface .The characteristics of this display module...

RP2350 1.43inch AMOLED Display Development Board, 466×466, SPI Interface Round Display, Onboard Accelerometer And Gyroscope Sensor, RTC Chip, Optional For...

This is a 5.5" mini-HDMI OLED-Display with Capacitive Touchscreen. It has 1920×1080 HDMI high-definition output and comes with a capacitive touch panel on its screen...

If you've been diggin' Adafruit's monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the...

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white...

This is a screen for advanced hackers who like the look of the OLED screen we've put into the Adafruit MACROPAD RP2040. This is just the raw...

This monochrome white OLED display features a standard SH1106 SPI interface and a 128×64-pixel resolution. With an active area measuring 1.3" diagonally, ...

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white...

This OLED goes out to all the fans who want more pixels in a smaller size! Normally our 128x64 OLEDs are the biggest ones we've stocked that can use...

A crisp, bright 1.12" OLED that's ideal for adding a small display to your project. Raspberry Pi and Arduino-compatible, this 128x128 pixel, monochrome white/black display is ideal for graphing, readouts, and displaying basic icons

The 15.6-inch 4K OLED touch display is ideal for graphic design, photo editing, and gaming. Equipped with HDMI and Type-C dual output interfaces, and...

An OLED module for the 4tronix BitBot XL, MiniBit and the Robobit Mk3(V1.3)

A crisp, bright 1.12" OLED that's ideal for adding a small display to your project. Raspberry Pi and Arduino-compatible, this 128x128 pixel, monochrome white/black display is ideal for graphing, readouts, and displaying basic icons.

E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY...

Yes, this is an adorable small television! The visible display measures only 2.5" (6.35cm) diagonal, the TFT comes with a NTSC/PAL driver board. The display is very .. read more