Search results for: 'uart expander'

Easily connect your microcontroller, Raspberry Pi or other electronic projects to your computer with this reliable and easy-to-use USB to UART converter. Featuring the highly-regarded CP2102 chip and plug-and-play functionality, this converter provides a stable and fast connection with minimal setup. Perfect for makers and electronics enthusiasts alike, get started with your next project with this handy tool.

USB to TTL converters are essential for prototyping - they provide a direct interface with the target device. This module connects to your computer USB port and there are 4 wires which connect with your target device.

USB to TTL converters are an essential for prototyping - they provide a direct interface with the target device. This module connects to your computer USB port and there are 4 wires which connect with your target device. This model is the bare version of our enclosed model.

isolated RS485 to UART signal transfer module comes with protection circuits such as power isolation and TVS...

USB To UART (TTL) Mini Communication Module, Compact Size, Stable Communication, Over-current/Over-voltage Protection, Multi Systems Support, TTL Serial...

Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme! But USB is hard, and you just want to transfer your every-day...

Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections...

ESP32 Servo Driver Expansion Board, Built-In WiFi And Bluetooth...

USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V, Multiple Protection Circuits, Multiple Systems Support,...

This USB-to-serial adapter lets you easily connect a TTL serial device to a PC by acting as a virtual serial port. The board is a Micro-USB carrier for ...

RainbowLink USB protocol converter with 4 independent channels (RS485, RS232, 2 TTL) designed for efficient multi-channel serial communication. It offers...

4 Port USB HUB HAT for Raspberry Pi, USB to UART Onboard...

This is a 2-channel isolated RS485 expansion HAT designed for Raspberry Pi, adopts the SC16IS752+SP3485 solution, with embedded protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc.

This IIC to Dual UART module offers data transmission rate up to 1Mbps, and each sub UART has independent 256-byte FIFO hardware buffer for transmitting and receiving. The baud rate, word length, and check format of every sub UART can be set independently.

Are you troubled by the various level standards and voltages of the serial port? This 6-in-1 USB to Serial Converter is just right for you. Check it out! One module...

2-Channel Isolated RS232 Expansion HAT for Raspberry Pi, SC16IS752+SP3232 Solution, with Multi Onboard Protection Circuits

Industrial USB TO 4CH TTL Converter, USB To UART, Multi Protection Circuits, Multi Systems Support...

No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter cable will be able to get...

This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPROM, and a 28-pin SSOP package this is a serious little chip.

Want to increase reliability and anti-interference for data transmission in your industrial applications? Try the RS485 Expansion HAT for Raspberry Pi....

We love using chips with 'native USB' peripherals - that's the magic silicon that lets a microcontroller act like an HID keyboard or mouse or...

The RP2040 Interfacer is a small low-cost USB to UART and I2C Adapter (both 3.3V) powered by an RP2040 microcontroller that plugs straight into a USB Type-A...

On our first Pentium 120 tower (purchased at PCs for Everyone on Thorndike st in Cambridge Mass) came with two DE-9 serial ports on the back: COM1 and...

No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter will be able to get this-connected-to-that. It...

The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header...

Serial Expansion HAT for Raspberry Pi, I2C Interface, 2-ch UART, 8 GPIOs

It's a blast-from-the-past with these FT232BL chips that we found while cleaning out a shelf at Adafruit. We haven't used these for years, having...

The FT230X USB Bridge is a compact USB to serial UART interface IC, engineered with an optimized pin count for space-constrained applications. It provides...

Bus Pirate v3 is a universal bus interface that talks to electronics from a PC serial terminal. Get to know a chip without writing code. Eliminates a ton...

This board allows you to interface with your car’s OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also provides a footprint which mates directly to our FTDI Basic or a Bluetooth Mate. The DB9 connector mates with our DB9 to OBD-II cable listed below.