Search results for: 'stepper motor hat'

50 results

Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

Brand: Adafruit
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up...
$40.15 AUD, inc GST

Adafruit TMC2209 Stepper Motor Driver Breakout Board

Brand: Adafruit
Stepper motors are used for CNC machines, 3D printers, and whenever else one needs precise, powerful motion. But to get good behavior from steppers you...
$17.05 AUD, inc GST

TB6600 Stepper Motor Driver

Brand: DFRobot
Stepper motor is a brushless DC electric motor that divides a full rotation into a number of equal steps The motor's position can then be commanded to move and hold at one of these steps.
$31.65 AUD, inc GST

A4988 Stepper Motor Driver Carrier, Black Edition

Brand: Pololu
Our Black Edition A4988 stepper motor driver carrier is a higher-performance drop-in replacement for the original A4988 stepper motor driver carrier. It features a four-layer PCB for better thermal performance, allowing the A4988 microstepping bipolar stepper motor driver to deliver approximately 20% more current than Pololu's two-layer (green) version. Like Pololu's original carrier, the Black Edition offers adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions. It operates from 8 V to 35 V and can deliver up to 2 A per coil with sufficient additional cooling. This board ships with 0.1″ male header pins included but not soldered in.
$16.70 AUD, inc GST

DRV8825 Stepper Motor Driver Carrier, High Current (Header Pins Soldered)

Brand: Pololu
This version of Pololu's DRV8825 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the DRV8825 Stepper Motor Driver Carrier product page for more information about the driver.
$28.45 AUD, inc GST

Adafruit A4988 Stepper Motor Driver Breakout Board

Brand: Adafruit
Stepper motors are used for CNC machines, 3D printers, and whenever else one needs precise, powerful motion. But to get good behavior from steppers you...
$13.20 AUD, inc GST

Dual Bipolar Stepper Motor Shield for Arduino (DRV8825)

Brand: DFRobot
Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an auto curtain......? As we all know, regular stepper motors are hard to drive, but with this stepper motor shield, you can easily drive 2 stepper motors via just 6 digital I/O pins
$58.36 AUD, inc GST

Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.3

Brand: Adafruit
The original Adafruit Motorshield kit is one of Adafruit's most beloved kits, which is why they decided to make something even better. This is an upgrade to the original shield...
$40.20 AUD, inc GST

Pololu Tic T249 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

Brand: Pololu
The Tic T249 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
$91.30 AUD, inc GST

DC Motor Driver HAT(V1.0)

Brand: DFRobot
This is a Raspberry Pi DC motor driver board with on-board encoder interface, which can drive 2-way DC motor and DC motor with encoder. It communicates with Raspberry...
$24.70 AUD, inc GST

EasyDriver - Stepper Motor Driver

Brand: SparkFun
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
$30.70 AUD, inc GST

Pololu Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

Brand: Pololu
The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC)
$58.30 AUD, inc GST

TB67S581FNG Stepper Motor Driver Carrier

Brand: Pololu
This breakout board for Toshiba’s TB67S581FNG microstepping bipolar stepper motor driver features adjustable current limiting, over-current and...
$11.70 AUD, inc GST

DC Motor + Stepper FeatherWing Add-on For All Feather Boards

Brand: Adafruit
A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper...
$38.10 AUD, inc GST

Pololu Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

Brand: Pololu
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC)
$74.85 AUD, inc GST

Adafruit DC & Stepper Motor Bonnet for Raspberry Pi

Brand: Adafruit
Let your robotic dreams come true with the new DC+Stepper Motor Bonnet from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive...
$43.30 AUD, inc GST

STSPIN220 Low-Voltage Stepper Motor Driver Carrier (Header Pins Soldered)

Brand: Pololu
This version of our STSPIN220 Low-Voltage Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with...
$20.05 AUD, inc GST

TB67S581FNG Stepper Motor Driver Carrier (Soldered Header Pins)

Brand: Pololu
This version of our TB67S581FNG Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an...
$13.40 AUD, inc GST

STSPIN820 Stepper Motor Driver Carrier

Brand: Pololu
This breakout board for STMicro’s STSPIN820 microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and a wide operating range...
$32.80 AUD, inc GST

DRV8434A Stepper Motor Driver Carrier

Brand: Pololu
This breakout board for TI’s DRV8434A microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and operates from 4.5 V to 48 V....
$23.05 AUD, inc GST

TB67S279FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)

Brand: Pololu
This version of our TB67S279FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an...
$21.40 AUD, inc GST

DRV8434 Stepper Motor Driver Carrier

Brand: Pololu
This breakout board for TI’s DRV8434 microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and operates from 4.5 V to 48 V....
$18.15 AUD, inc GST

DRV8834 Low-Voltage Stepper Motor Driver Carrier (Header Pins Soldered)

Brand: Pololu
This version of our DRV8834 Low-Voltage Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an...
$18.40 AUD, inc GST

Pololu Tic T825 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

Brand: Pololu
The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
$74.85 AUD, inc GST

Adafruit STSPIN220 Stepper Motor Driver Breakout Board

Brand: Adafruit
Stepper motors are used for CNC machines, 3D printers, and whenever else one needs precise, powerful motion. But to get good behavior from steppers, you...
$11.70 AUD, inc GST

A5984 Stepper Motor Driver Carrier, Adjustable Current, Blue Edition (Soldered Header Pins)

Brand: Pololu
This version is item #5340 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It...
$11.15 AUD, inc GST

A5984 Stepper Motor Driver Carrier, Fixed 1A@5V / [email protected], Blue Edition (Soldered Header Pins)

Brand: Pololu
This version is item #5346 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It...
$10.85 AUD, inc GST

A5984 Stepper Motor Driver Carrier, Fixed 500mA@5V / [email protected] (Soldered Header Pins)

Brand: Pololu
This version is item #5350 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It...
$10.40 AUD, inc GST

A5984 Stepper Motor Driver Carrier, Adjustable Current

Brand: Pololu
This is a carrier board for Allegro’s A5984 microstepping bipolar stepper motor driver. It offers eight different microstep resolutions (down to...
$9.30 AUD, inc GST

TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)

Brand: Pololu
This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an...
$25.10 AUD, inc GST

A5984 Stepper Motor Driver Carrier, Fixed 1.5A@5V / [email protected], Blue Edition (Soldered Header Pins)

Brand: Pololu
This version is item #5344 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It...
$10.85 AUD, inc GST

A5984 Stepper Motor Driver Carrier, Adjustable Current, Blue Edition

Brand: Pololu
This is a carrier board for Allegro’s A5984 microstepping bipolar stepper motor driver. It offers eight different microstep resolutions (down to...
$9.60 AUD, inc GST

TB67S128FTG Stepper Motor Driver Carrier

Brand: Pololu
This breakout board makes it easy to use Toshiba’s TB67S128FTG microstepping bipolar stepper motor driver, which features adjustable current limiting and...
$28.45 AUD, inc GST
Similar matches

Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA

Brand: Adafruit
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified...
$37.40 AUD, inc GST

A4988 Stepper Motor Driver Carrier (Header Pins Soldered)

Brand: Pololu

This version of Pololu's A4988 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard.

$16.15 AUD, inc GST

Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors

Brand: Pololu
This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slots and holes for a wide variety of mounting solutions, and four M3×6mm screws are included for securing the motor to the bracket.
$11.40 AUD, inc GST

28BYJ-48 Stepper Motor Module with Driver for STEM Robotics (5V, 0.9 kgf·cm)

Brand: DFRobot
The all-in-one 28BYJ-48 stepper motor module with an integrated driver. Its plug-and-play 4-pin interface is perfect for Arduino classroom projects...
$19.15 AUD, inc GST

A4988 Stepper Motor Driver Carrier

Brand: Pololu
This breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). This board ships with 0.1″ male header pins included but not soldered in.
$13.90 AUD, inc GST

A4988 Stepper Motor Driver Carrier, Black Edition (Header Pins Soldered)

Brand: Pololu

This version of Pololu's Black Edition A4988 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard.

$17.75 AUD, inc GST

Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase

Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
$69.40 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.