Search results for: 'splitter'

38 results

PiicoDev Splitter

Brand: PiicoDev

Split one PiicoDev Cable in three directions, or break out for soldered connections

$3.50 AUD, inc GST

USB-C Splitter for AndroidAuto/CarPlay

Brand: CentyLab

Achieve rapid charging while using a wired Android Auto or CarPlay adapter that allows you to inject high-wattage USB-PD power into your connection, bypassing the low-current limits of standard head units.

$21.90 AUD, inc GST

UCTRONICS Gigabit PoE Splitter 5V 3A, 2-in-1 PoE to USB C/Micro USB Adapter

Brand: UCTRONICS
To make PoE to Micro USB and USB C devices more easily and conveniently accessible,
$31.90 AUD, inc GST

2-Way 2.1mm DC Barrel Jack Splitter Squid

Brand: Adafruit
Double up your power adapters with this wonderfully simple 2-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end...
$6.95 AUD, inc GST

T-Connector For Silicone Tubing - 5 Pack

Brand: Adafruit
These go great with Adafruit's silicone tubing for air pumps and valves - great for making adapters or splitters. The three ports have an outer diameter of about 4mm, so 3mm ID silicone tubing with make a nice seal. Comes in a pack of 5, so you have plenty to mess with.
$8.15 AUD, inc GST

UCTRONICS PoE Splitter Gigabit 5V - Micro USB Power

Brand: UCTRONICS

Supply power and transfer data to micro USB powered devices like RPi 3B+ via a single Ethernet cable

$25.45 AUD, inc GST

802.3af PoE Output Data & Power Splitter - 12V 1A

Brand: Adafruit
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device...
$22.70 AUD, inc GST

HDMI Splitter - 1:2

Brand: Core Electronics

Split your HDMI output to 2 screens or monitors.

$18.75 AUD, inc GST

PoE Splitter with USB Type C - 5V 2A - 100 MB Ethernet

Brand: Adafruit
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then separates the data (Ethernet) and power (5 VDC regulated) into two different lines for non-PoE devices.
$32.45 AUD, inc GST

XT60 to XT30 Y-Harness (Single FH-MC XT60 to Dual MH-FC XT30, 150mm Length)

Brand: goBILDA
This is a 150mm long single, female XT60 conector that splits off to two male XT30 connectors
$8.35 AUD, inc GST

Anderson Cable Dual Adapter (10AWG Splitter)

Brand: Core Electronics

Branch off your power bus with this Anderson y-Splitter.

$22.10 AUD, inc GST

T Connector Male-Female Pair

Brand: Pololu
These are generic connectors similar to the popular Deans Ultra Plug connectors. They are sold as matching male-female pairs and have a current rating of 50 A. They are the smallest high-current connectors Pololu know of, and they are great for projects that involve bigger motors and controllers, such as Pololu's Simple Motor Controllers and high-power motor drivers.
$5.30 AUD, inc GST

Servo Y Splitter Cable 12" Female - 2x Male

Brand: Pololu
This 12-inch (300-mm), flat Y-cable is typically used to connect two servos to a single servo port . It has 22-AWG wires terminated on one end by a “JR”-style female connector and on the other by two Futaba J male connectors, allowing it to work in either system or as an adapter between systems. The split occurs close to the cable’s JR input, so the two male ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.
$12.15 AUD, inc GST

SmartiPi Touch Pro 3 - Display power kit

Brand: Core Electronics

Neaten up your SmartiPi Touch Pro 3 setup, and make way for HATs.

$16.70 AUD, inc GST

802.3af PoE Output Data & Power Splitter - 5/9/12V

Brand: Adafruit
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device...
$56.90 AUD, inc GST

Industrial RS485 Opto-Isolated Hub

Brand: DFRobot
This 4-Port RS485 bus split hub is specially designed to meet the requirements of RS485 large-scale systems in complex electromagnetic environments. Its transmission...
$115.76 AUD, inc GST

0.3m 3.5mm Stereo Plug To 2 x 3.5mm Stereo Socket Cable

Brand: Core Electronics
3.5mm Stereo plug - 2 x 3.5mm socket (Y lead), 30cm long
$14.75 AUD, inc GST

HDMI Splitter 1x4

Brand: Core Electronics

Split your HDMI output to 4 screens or monitors.

$14.15 AUD, inc GST

4-Way 2.1mm DC Barrel Jack Splitter

Brand: Adafruit
Quadruple your power adapters with this wonderfully simple 4-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end...
$12.30 AUD, inc GST

PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp

Brand: Adafruit
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device...
$24.40 AUD, inc GST

Passive PoE Cable Set

Brand: SparkFun
Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it’s hard to get power to your Ethernet devices. Wouldn’t it be convenient to use the same cable for power and data? Using these power over Ethernet adapters, you can do just that!
$11.60 AUD, inc GST

SmartiPi Touch Pro - USB extender

Brand: Core Electronics

For those mounting their Pi to the SmartiPi Cases with the USB ports facing inside.

$13.50 AUD, inc GST

In-line wire 1-to-4 splitter

Brand: Adafruit
If you want to connect multiple EL wires/strips/panels up to one inverter, these splitters are quite useful. There is one male connector (goes to the inverter) and...
$4.05 AUD, inc GST

Twisted Servo Y Splitter Cable 12" Female - 2x Female

Brand: Pololu
This 12-inch (300-mm), twisted Y-cable can be used to split a single RC hobby servo signal into two identical outputs. It has 22-AWG wires terminated on all three ends by “JR”-style female connectors, which are compatible with 0.1" header bins and both male JR and male Futaba J connectors. The split occurs close to the cable’s input, so the two output ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).
$14.55 AUD, inc GST

Servo Y Splitter Cable 12" Female - 2x Female

Brand: Pololu
This 12-inch (300-mm), flat Y-cable can be used to split a single RC hobby servo signal into two identical outputs. It has 22-AWG wires terminated on all three ends by “JR”-style female connectors, which are compatible with 0.1" header bins and both male JR and male Futaba J connectors. The split occurs close to the cable’s input, so the two output ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.
$12.15 AUD, inc GST

littleBits Split

Brand: LittleBits
The littleBits split module sends a single input to two wired outputs. It's great for connecting one output to two inputs, like using a keyboard to control two oscillators. But keep in mind that it can be used just like a wire module if you ignore one of its outputs.
$32.95 AUD, inc GST

Macchina OBD-II Extender Cable

Brand: SparkFun
This custom-designed OBD2 cable from Macchina functions as both a splitter and at about one meter (~39 inches) in length, as an OBD2 extension cable...
$104.95 AUD, inc GST

SparkFun Multiplexer Breakout - 8 Channel (74HC4051)

Brand: SparkFun
The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, individually selectable signals, which can be used to do everything from driving eight LEDs to monitoring eight potentiometers.
$5.95 AUD, inc GST

HDMI Switch - 3:1

Brand: Core Electronics

Seamlessly switch between 3 different HDMI outputs!

$9.45 AUD, inc GST

Bidirectional USB 3 Multiplexer

Brand: The Pi Hut
The bidirectional USB 3 Multiplexer ('mux') allows either a single USB device (or multiple devices when using a USB hub) to be switched between two USB...
$33.80 AUD, inc GST

HDMI Switch - 5:1

Brand: Core Electronics

Seamlessly switch between 5 different HDMI outputs!

$28.46 AUD, inc GST

HDMI Matrix - 4:2

Brand: Core Electronics
Explore the HDMI Matrix 4:2; a versatile switch offering 4 HDMI inputs and 2 outputs for a streamlined multimedia setup. Ideal for hobbyists and tech enthusiasts, this compact solution supports seamless device management without the need for additional software.
$79.60 AUD, inc GST

16 Channel Multiplexer

Brand: SparkFun
Texas Instruments CD74HC4067 16-Channel multiplexer. What can you do with it? How about taking an analog to digital reading from 16 devices with only 1 ADC channel and 4 control pins. That’s right, 16 for the price of 5! 24-Pin SSOP package. Works great with our 28-Pin SSOP to DIP adapters.
$1.75 AUD, inc GST
Similar matches

SmartiPi Touch 2 - Stand For Raspberry Pi 7" Touchscreen Display

The SmartiPi Touch 2 is a case for the Official Raspberry Pi Display, Raspberry Pi and Raspberry Pi camera. New features include, an integrated camera mount, three interchangeable face plate options, and cooling fan.
$56.70 AUD, inc GST

SmartiPi Touch Pro - Small

Transform your Raspberry Pi into an all-in-one computer with the SmartiPi Touch Pro case. Mount your Pi behind the 7" touch screen and enjoy easy access to ports with its flush-edge design. Available in small and large variants.
$58.80 AUD, inc GST

SmartiPi Touch Pro 2 - compatible with the Raspberry Pi Official Display

Brand: SmartiCase
The SmartiPi Touch Pro 2 has all the same features as the SmartiPi Touch Pro but also has micro SD card access on the side of the case. The SmartiPi Touch...
$94.20 AUD, inc GST

Gravity: UART Fiber Optic Transceiver Module

Brand: DFRobot
The Gravity: UART Fiber Optic Transceiver Module with complete electrical isolation for preventing electromagnetic interference can run at 2000000 baud in...
$41.97 AUD, inc GST

Cold 2-Wire Splice (UY) - 10 pack

Brand: Adafruit
Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able plastic splices for fast connections...
$5.50 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.