Search results for: 'dupont splitter'
Servo Y Splitter Cable 12" Female - 2x Male
Brand: Pololu
This 12-inch (300-mm), flat Y-cable is typically used to connect two servos to a single servo port . It has 22-AWG wires terminated on one end by a “JR”-style female connector and on the other by two Futaba J male connectors, allowing it to work in either system or as an adapter between systems. The split occurs close to the cable’s JR input, so the two male ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.
$12.15 AUD, inc GST
Twisted Servo Y Splitter Cable 12" Female - 2x Female
Brand: Pololu
This 12-inch (300-mm), twisted Y-cable can be used to split a single RC hobby servo signal into two identical outputs. It has 22-AWG wires terminated on all three ends by “JR”-style female connectors, which are compatible with 0.1" header bins and both male JR and male Futaba J connectors. The split occurs close to the cable’s input, so the two output ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).
$14.55 AUD, inc GST
Servo Y Splitter Cable 12" Female - 2x Female
Brand: Pololu
This 12-inch (300-mm), flat Y-cable can be used to split a single RC hobby servo signal into two identical outputs. It has 22-AWG wires terminated on all three ends by “JR”-style female connectors, which are compatible with 0.1" header bins and both male JR and male Futaba J connectors. The split occurs close to the cable’s input, so the two output ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.
$12.15 AUD, inc GST
0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 25-Pack
Brand: Pololu
These two-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 25.
$3.75 AUD, inc GST
Snap Action 1-to-5 Wiring Block Connector - Clear DF-15
Brand: Adafruit
Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much...
$3.95 AUD, inc GST
0.1" (2.54mm) Crimp Connector Housing: 1x8-Pin 10-Pack
Brand: Pololu
These eight-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
$4.55 AUD, inc GST
0.1" (2.54mm) Crimp Connector Housing: 1x6-Pin 10-Pack
Brand: Pololu
These six-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
$4.05 AUD, inc GST
0.1" (2.54mm) Crimp Connector Housing: 1x7-Pin 10-Pack
Brand: Pololu
These seven-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
$4.60 AUD, inc GST
0.1" (2.54mm) Crimp Connector Housing: 1x9-Pin 5-Pack
Brand: Pololu
These nine-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.
$4.55 AUD, inc GST
0.1" (2.54mm) Crimp Connector Housing: 1x10-Pin 5-Pack
Brand: Pololu
These ten-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.
$4.55 AUD, inc GST
0.1" (2.54mm) Crimp Connector Housing: 2x4-Pin 10-Pack
Brand: Pololu
These 2×4-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
$4.30 AUD, inc GST
0.1" (2.54mm) Crimp Connector Housing: 2x16-Pin 5-Pack
Brand: Pololu
These 2×16-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.
$7.15 AUD, inc GST
0.1" (2.54mm) Crimp Connector Housing: 2x18-Pin 5-Pack
Brand: Pololu
These 2×18-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced...
$8.25 AUD, inc GST
Similar matches
PiicoDev Splitter
Brand: PiicoDev
Split one PiicoDev Cable in three directions, or break out for soldered connections
$3.50 AUD, inc GST
DC Barrel Jack Adapter - Female
Brand: DFRobot
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack.
$3.20 AUD, inc GST
3x AAA Battery box (Dupont, Switch)
Brand: Core Electronics
Conveniently power your projects with this sleek, quality battery box!
$1.70 AUD, inc GST
Quick Snap Connector Kit
Brand: Core Electronics
Tired of soldering? Grab some of these snap-action connectors and never worry about soldering again!
$29.20 AUD, inc GST
2-Way 2.1mm DC Barrel Jack Splitter Squid
Brand: Adafruit
Double up your power adapters with this wonderfully simple 2-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end...
$6.95 AUD, inc GST
HDMI Splitter 1x4
Brand: Core Electronics
Split your HDMI output to 4 screens or monitors.
$14.15 AUD, inc GST
Amphenol FCI Clincher Connector (2 Position, Male)
Brand: Sparkfun
These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the...
$5.90 AUD, inc GST
JST-PH 3 Holes Female Connector
Brand: DFRobot
This product includes 3-pin 2.0mm mating connector housing(10 units) and crimp pins (30 units).
$1.25 AUD, inc GST
Polarized Connectors - Crimp Pins
Brand: Sparkfun
Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed.
$4.25 AUD, inc GST
HDMI Splitter - 1:2
Brand: Core Electronics
Split your HDMI output to 2 screens or monitors.
$18.75 AUD, inc GST
4-Way 2.1mm DC Barrel Jack Splitter
Brand: Adafruit
Quadruple your power adapters with this wonderfully simple 4-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end...
$12.30 AUD, inc GST
Anderson Cable Dual Adapter (10AWG Splitter)
Brand: Core Electronics
Branch off your power bus with this Anderson y-Splitter.
$22.10 AUD, inc GST
PoE Splitter with USB Type C - 5V 2A - 100 MB Ethernet
Brand: Adafruit
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then separates the data (Ethernet) and power (5 VDC regulated) into two different lines for non-PoE devices.
$32.45 AUD, inc GST
Amphenol FCI Clincher Connector (2 Position, Female)
Brand: Sparkfun
These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the...
$5.50 AUD, inc GST
Pimoroni HyperPixel 4.0 I2C Cable (JST-PH to male DuPont)
Brand: Pimoroni
A handy little cable that connects to the JST connector on the underside of HyperPixel 4.0, allowing you to use I2C devices with your Raspberry Pi at the same time as the display.
$4.80 AUD, inc GST
In-line wire 1-to-4 splitter
Brand: Adafruit
If you want to connect multiple EL wires/strips/panels up to one inverter, these splitters are quite useful. There is one male connector (goes to the inverter) and...
$4.05 AUD, inc GST
PH2.0-3P Cable F/F (10 Pack)
Brand: DFRobot
What do you do if you find that the line length is not enough when you do a project with Boson Kit? Or you find out the interface of Boson module is not matched...
$8.55 AUD, inc GST
Amphenol FCI Clincher Connector (3 Position, Female)
Brand: Sparkfun
These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the...
$3.40 AUD, inc GST
Amphenol FCI Clincher Connector (3 Position, Male)
Brand: Sparkfun
These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the...
$2.95 AUD, inc GST
PH2.0-3P Male-to-Male Cable – 10cm (10 Pack)
Brand: DFRobot
10cm PH2.0-3P male-to-male cable with polarized connectors prevents reverse wiring. Ideal for Boson modules, UNIHIKER, and STEM/IoT projects. 10pcs per...
$8.15 AUD, inc GST
40 Pin Break Away Male Header- Long Straight-10 Pcs
Brand: DFRobot
These are a longer version of our standard break away headers. They are 10mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs.
$5.25 AUD, inc GST
Polarized Connectors - Header (4-Pin)
Brand: Sparkfun
Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed.
$0.82 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.