Search results for: 'qwiic splitter'
Helpful videos
1
PiicoDev Splitter
Brand: PiicoDev
Split one PiicoDev Cable in three directions, or break out for soldered connections
$3.50 AUD, inc GST
Adafruit Qwiic / Stemma QT 5 Port Hub
Brand: Adafruit
Qwiic, or STEMMA QT, is a very efficient way to quickly prototype an idea, but a lot of Qwiic/Stemma QT driver boards only have one port, and devices have...
$4.95 AUD, inc GST
SparkFun Qwiic MultiPort
Brand: Sparkfun
Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic MultiPort adds additional ports to...
$4.30 AUD, inc GST
SparkFun Qwiic pHAT V2.0 for Raspberry Pi
Brand: Sparkfun
The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry...
$13.25 AUD, inc GST
SparkFun Qwiic Shield for Arduino
Brand: Sparkfun
The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-based device. This shield...
$14.05 AUD, inc GST
SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A)
Brand: Sparkfun
Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the same bus! The Qwiic Mux Breakout...
$24.95 AUD, inc GST
SparkFun Qwiic / Stemma QT FeatherWing (Shield for Thing Plus)
Brand: Adafruit
The SparkFun Qwiic FeatherWing (Shield for Thing Plus) provides an easy-to-assemble way to add the STEMMA QT / Qwiic connect ecosystem to any development board with...
$13.55 AUD, inc GST
SparkFun Qwiic Shield for Teensy
Brand: Sparkfun
The SparkFun Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield is sized...
$7.35 AUD, inc GST
SparkFun Qwiic Shield for Thing Plus
Brand: Sparkfun
The SparkFun Qwiic Shield for Thing Plus provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Thing Plus or Feather boards...
$9.65 AUD, inc GST
PiicoDev Cable Expansion Kit
Brand: PiicoDev
Top up your PiicoDev Starter kit with a range of the most used cables!
$12.76 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long
Brand: Adafruit
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead...
$1.85 AUD, inc GST
Flexible Qwiic Cable - 100mm
Brand: Sparkfun
This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$3.80 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long
Brand: Adafruit
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm...
$2.55 AUD, inc GST
JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long
Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared...
$1.95 AUD, inc GST
SparkFun Qwiic Adapter
Brand: Sparkfun
The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors...
$2.75 AUD, inc GST
Flexible Qwiic Cable - 50mm
Brand: Sparkfun
This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$2.75 AUD, inc GST
Flexible Qwiic Cable - 500mm
Brand: Sparkfun
This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$5.80 AUD, inc GST
Flexible Qwiic Cable - 200mm
Brand: Sparkfun
This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$4.05 AUD, inc GST
SparkFun Qwiic HAT for Raspberry Pi
Brand: Sparkfun
The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve...
$11.20 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long
Brand: Adafruit
This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...
$3.25 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long
Brand: Adafruit
This 4-wire cable is a little over 300mm / 11.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...
$2.80 AUD, inc GST
Adafruit Qwiic / Stemma QT Breakout Board
Brand: Adafruit
We got a request from a customer for a board that makes connecting between a breadboard and Stemma QT or Qwiic components easy, and here's what we...
$3.80 AUD, inc GST
WisBlock QWIIC Module RAK13009
Brand: RAKwireless
Connect QWIIC, STEMMA QT and PiicoDev modules to WisBlock in a sensor slot using a compact JST-SH interface for flexible IoT prototyping.
$4.95 AUD, inc GST
SparkFun Qwiic Shield for Teensy - Extended
Brand: Sparkfun
The SparkFun Extended Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield...
$8.50 AUD, inc GST
SparkFun Qwiic Starter Kit for Raspberry Pi V2
Brand: Sparkfun
The SparkFun Qwiic Kit for Raspberry Pi includes a shield with headers, three Qwiic-enabled breakout boards, and four cables to help make I2C easier!...
$119.95 AUD, inc GST
SparkFun QwiicBus - MidPoint
Brand: Sparkfun
The SparkFun QwiicBus MidPoint works in tandem with the QwiicBus Endpoint so you can extend the range of your I2C bus and easily tap into it to drop in devices wherever...
$54.40 AUD, inc GST
Similar matches
PiicoDev Cable 100mm
Brand: PiicoDev
This 100mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.85 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long
Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with...
$1.95 AUD, inc GST
Qwiic to Gravity Cable - JST-SH to JST-PH (200mm, 28 AWG)
Brand: Sparkfun
With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other...
$2.30 AUD, inc GST
SparkFun Qwiic SHIM for Raspberry Pi
Brand: Sparkfun
The SparkFun Qwiic SHIM for Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you...
$3.30 AUD, inc GST
Flexible Qwiic to STEMMA Cable - 500mm
Brand: Sparkfun
The Qwiic to STEMMA Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and the I2C based STEMMA boards from Adafruit...
$5.95 AUD, inc GST
SparkFun Qwiic GPIO
Brand: Sparkfun
Do you find yourself wishing that you had just a few more GPIO pins? What if you only need that one more pin? You could add another microcontroller to your project...
$11.70 AUD, inc GST
SparkFun Qwiic Pocket Development Board - ESP32-C6
Brand: Sparkfun
The SparkFun ESP32-C6 Pocket Dev Board is built around a RISC-V single-core processor with 4 MB flash memory in a 1"x1" Qwiic Standard Footprint!...
$37.05 AUD, inc GST
SparkFun QwiicBus - EndPoint
Brand: Sparkfun
The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’s PCA9615 IC, which converts...
$24.90 AUD, inc GST
SparkFun RedBoard Qwiic
Brand: Sparkfun
At SparkFun we continually like to inovate, update, and improve even when it comes to our very own development boards. We have multiple versions of the SparkFun...
$39.50 AUD, inc GST
SparkFun Digi XBee® Arduino Shield - USB-C (Qwiic)
Brand: Sparkfun
The SparkFun Digi XBee® Arduino Shield is your gateway to a world of wireless innovation on your favorite Arduino device...
$22.30 AUD, inc GST
SparkFun Qwiic pHAT Extension for Raspberry Pi 400
Brand: Sparkfun
The SparkFun Qwiic pHAT Extension for the Raspberry Pi 400 provides you with a quick and easy solution to access all of the 400's GPIO, stack your favorite HAT right-side...
$13.10 AUD, inc GST
SparkFun Qwiic micro:bit Breakout (with Headers)
Brand: Sparkfun
The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access...
$11.65 AUD, inc GST
SparkFun QwiicBus Kit
Brand: Sparkfun
The SparkFun QwiicBus Kit comes with everything you need to get started with the SparkFun QwiicBus system in one handy package. The kit includes two QwiicBus EndPoints...
$85.10 AUD, inc GST
Qwiic JST Connector - SMD 4-pin
Brand: Sparkfun
Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible...
$1.05 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.