SmartiPi Touch 2 - Stand For Raspberry Pi 7" Touchscreen Display

Rating:
98% of 100
SKU: CE06652
The SmartiPi Touch 2 is a case for the Official Raspberry Pi Display, Raspberry Pi and Raspberry Pi camera. New features include, an integrated camera mount, three interchangeable face plate options, and cooling fan.
$59.95 AUD, inc GST
$54.50 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Thu, 18th of Jul

Quantity Discounts:

  • 6-12 $52.32 (exc GST)
  • 12+ $50.68 (exc GST)
- +

21 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • $10+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

The SmartiPi Touch is a case and stand for the official Raspberry Pi 7" Touchscreen LCD. The display securely fits into the case with four screws, while a Raspberry Pi 2, 3, 4, B+ or A+ is enclosed in the compartment on the back with a simple door. A ribbon cable that comes with the display connects into the Raspberry Pi DSI port. The stand has a pivot that allows you to adjust the angle of the screen for better viewing, as well as mounting points to affix it to a certain location.

The SmartiPi Touch also includes a small case that houses your very own Raspberry Pi Camera Module, which can be attached via LEGO-compatible studs on the front or the back of the display case. Additionally, if you are looking to attach any HATs to the Raspberry Pi, you are in luck! The door to the Raspberry Pi has been cut to accommodate access to all of its GPIO pins. There is even a dual micro USB splitter cable included, which allows you to use a micro USB power supply to power the display and the Raspberry Pi at the same time!

Full list of included features:

  • Adjustable angle
  • Building block compatible front plate with camera hole
  • Smooth front plate with camera hole
  • Smooth front plate
  • Door with fan
  • Door with GPIO access
  • USB-C splitter (for use with Pi 4)
  • Micro USB splitter (for use with Pi 2 and 3)
  • Compact mounts
  • 75mm VESA mounting
  • HDMI and audio port access
  • Compatible with the Raspberry Pi B+,2B,3B,3A+,3B+, and 4
  • Compatible with the Raspberry Pi camera V1 and V2
  • Compatible with the Official Raspberry Pi Display

Get the SmartPi Touch 2 Back Cover (35mm) which allows you to cover HAT boards. Also available is a slim version, the SmartiPi Touch 2 Back Cover (15mm)

Full setup guide here

Product Dimensions (After a 3D model? Smarticase will send you a STEP file if you ask them nicely)

Please note the Raspberry PiRaspberry Pi display, and Raspberry Pi camera not included. 

Everything shown below is included.

This product is listed in:

Raspberry Pi>Displays

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

Raspberry Pi 5 Vs Raspberry Pi 4 Model B | Comparison & Benchmarking

The Raspberry Pi 5 is here and one of the biggest questions is, how does it stack up against the pr...
The Raspberry Pi 5 is here and one of the biggest questions is, how does it stack up against the pr...

Raspberry Pi 5 | Review, Performance & Benchmarks

The Raspberry Pi 5 is here! Our favourite credit card-sized computer has just gotten an update and ...
The Raspberry Pi 5 is here! Our favourite credit card-sized computer has just gotten an update and ...

Waveshare 5.5 Inch AMOLED Screen for Raspberry Pi

Ever wanted a pocket computer with a Full HD screen (1080x1920)? Love tiny GPIO screens like this ...
Ever wanted a pocket computer with a Full HD screen (1080x1920)? Love tiny GPIO screens like this ...

Dual Monitors with Raspberry Pi 4 Model B or Raspberry Pi 400

Being productive and efficient on a computer has become synonymous with dual-screens. Being able to ...
Being productive and efficient on a computer has become synonymous with dual-screens. Being able to ...

Projects

safePower

I like working with the Pi Zero W and Pi 4 as they are very compact, very powerful and very cheap fo...
I like working with the Pi Zero W and Pi 4 as they are very compact, very powerful and very cheap fo...

ESP32 IR-Triggered Camera with Home Assistant Integration

I love the ESP line-up. I started by messing around with the ESP8266 and I completely fell in love w...
I love the ESP line-up. I started by messing around with the ESP8266 and I completely fell in love w...

LuMa 1 - The Neo Disco Ball

It is real and here it is! Including everything you need to make one a Luma 1 for yourself! S...
It is real and here it is! Including everything you need to make one a Luma 1 for yourself! S...

Educational Workshops

Raspberry Pi Workshop for Beginners

Welcome to the Raspberry Pi Workshop for Beginners! Here you'll be able to follow along with our s...
Welcome to the Raspberry Pi Workshop for Beginners! Here you'll be able to follow along with our s...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.