Search results for: 'servo horn 20t'

Control a linkage, flap, lever or pushrod.....

High quality black anodized aluminum multi-purpose standard servo bracket. It is suitable to make Pan/Tilt and multi-axis joints for use in robot arms and legs.

This 20 tooth servo gear is most commonly used to drive the 100.....

Here is a powerful, low-cost, reliable servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 83.47 oz-in. of maximum torque at 0.16 sec/60°

This is a high quality plastic servo horn. It fits DF series servos. Made specifically for DF series servos.

This is an anodized aluminum servo horn for the Power HD Ultra-High-Torque, High-Voltage Digital Giant Servo HD-1235MG. The HD-1235 ships with a set of plastic horns, but metal is the way to go if you want to get the most torque out of this 1/4-scale servo.

This is an anodized aluminum servo horn for the FEETECH Ultra-High-Torque, High-Voltage Digital Giant Servo FT5335M. The FT5335M ships with a set of...

This 25 tooth servo hub is a sleek and slim horn that allows you to fasten nearly any part with the 16mm pattern to the top of a servo. The.....

This 30 tooth servo gear is most commonly used to drive the 90.....

This 25 tooth ServoBlock isolates radial loads from your servo with a robust frame that’s highly compact, super mountable, and rocking an.....

This 24 tooth servo gear is most commonly used to drive the 96.....

This 40 tooth servo gear is most commonly used to drive the 80.....

This 15 tooth servo gear is most commonly used to drive the 105.....

These black plastic wheels have silicone tires and measure 40 mm (1.57") in diameter. They mount onto micro servo splines with 20 teeth and a 4.8 mm...

These white plastic wheels have silicone tires and measure 40 mm (1.57") in diameter. They mount onto micro servo splines with 20 teeth and a 4.8 mm...

These red plastic wheels have silicone tires and measure 40 mm (1.57") in diameter. They mount onto micro servo splines with 20 teeth and a 4.8 mm...

These black plastic wheels have silicone tires and measure 60 mm (2.36") in diameter. They mount onto micro servo splines with 20 teeth and a 4.8 mm...

This high-torque standard servo now comes in a metal-gear flavor, for extra-high torque (10 kg*cm!) and reliability! It can rotate at least 120 degrees (60 in each...

These white plastic wheels have silicone tires and measure 60 mm (2.36") in diameter. They mount onto micro servo splines with 20 teeth and a 4.8 mm...

This servo hub is perfect for driving goBILDA® components from a 25 tooth (H25T) servo! 16mm pattern components such as gears, sprockets,.....

Isolate the radial load from your servo with a ServoBlock™! This 25 tooth version has a hub-shaft which contains both threaded.....

Though most servos support their splined output shafts with internal bearings, those bearings can’t handle many of the radial loads they.....

These red plastic wheels have silicone tires and measure 60 mm (2.36") in diameter. They mount onto micro servo splines with 20 teeth and a 4.8 mm...

Isolate the radial load from your servo with a ServoBlock™! This 25 tooth version has a hub-shaft which contains both...

The 1908 Series Servo Hub is 32mm in diameter and 6mm thick so that you can support it with a

This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos...

This simple plate is intended to hold a large size servo. The slotted holes on the sides of the plate offer adjustability so that you can.....

The HS-488HB servo is based around the popular HS-485HB but with a few noteworthy changes. To be more compatible with a wider spectrum of.....