Skip to the beginning of the images gallery

Hitec HS-488HB Servo

SKU: GB-33488 Brand: goBilda

The HS-488HB servo is based around the popular HS-485HB but with a few noteworthy changes. To be more compatible with a wider spectrum of.....

$50.80 AUD, inc GST

$46.18 AUD, exc GST

Available with a lead time
Expect dispatch between May 22 and May 24

Quantity Discounts:

6+ $45.49 (exc GST)

The HS-488HB servo is based around the popular HS-485HB but with a few noteworthy changes. To be more compatible with a wider spectrum of the servos and attachments on the market, the HS-488HB has a 25 tooth spline. This makes bulking up supporting parts much easier as you are able to stick to one spline size rather than bouncing back and forth between 24 and 25. The new spline comes with a larger servo screw that has a 2.5mm hex drive rather than a Phillips drive. The HS-488HB also has an updated potentiometer which has allowed the removal of the mechanical stops in the geartrain. Without mechanical stops you can drive the servo to the extremes in terms of range of motion without concern of contacting a mechanical stop which puts the servo in a stall situation.

Downloads

STEP File

Specs

Weight	45g
Type	Analog
Output Shaft Style	25 Tooth Spline
Voltage Range	4.8V ~ 6V
No-Load Speed (4.8V)	0.22 sec/60°
No-Load Speed (6.0V)	0.18 sec/60°
Stall Torque (4.8V)	4.8 kg.cm (66.6 oz-in)
Stall Torque (6.0V)	6.0 kg.cm (83.3 oz-in)
Max PWM Range	553-2425µsec
Travel per µsec	0.102°/µsec
Pulse Amplitude	3-5V
Direction	Clockwise w/ Increasing PWM Signal
Deadband Width	8 µsec
Motor Type	3 Pole Ferrite
Feedback Style	5KO Potentiometer
Output Shaft Support	Top Ball Bearing, Bottom Bushing
Gear Material	Karbonite
Wire Length	300mm
Wire Gauge	25 AWG
Connector Type	3-Pos TJC8 Servo Connector [MH-FC]

This product is listed in:

goBILDA>Motion>Servos>Standard Size Servos>Hitec Servos
goBILDA>Electronics>Servos>Standard Size Servos>Hitec Servos

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$6+ for Standard Post (typically 6+ business days, tracked)
$10+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$11+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!