Element-6 Radio Control System (Mode 2)

Rating:
100% of 100
SKU: GB-3113-2006-0001 Brand: goBilda
The Element 6 Radio Control System has 6 channels to control your project from afar. Channels 1-4 provide proportional control.....
$98.30 AUD, inc GST
$89.36 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Tue, 26th of Nov

Quantity Discounts:

  • 10-25 $84.90 (exc GST)
  • 25+ $80.43 (exc GST)
- +

3 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

The Element 6 Radio Control System has 6 channels to control your project from afar.  Channels 1-4 provide proportional control from the gimbals (joysticks). Built-in channel mixing and reversing allows you to easily configure this radio system to control a robot chassis to your liking.   The fifth channel is a switch to send three pre-established signals which can be used to control lights, switches, relays or a servo that you want to send to three specific positions. Channel 6 is a proportional knob, useful to dial-in and stay at a particular brightness, speed, or position.

This radio system operates at 2.4GHz, and the transmitter is setup as “Mode 2”. The mode refers to the physical setup of the gimbals. In Mode 2, the left gimbal’s Y (vertical) axis stays where you set it, while the right gimbal’s Y axis returns to center when released.

Element Receiver

The included Element Receiver is available individually. It’s also the same receiver used in the four-channel Pistol Grip Element-4 Radio Control System, which offers fewer channels but greater steering control.

Regardless of your transmitter’s style or channel count, the Element Receiver’s M.BUS output is available for usage. The M.BUS output is functionally the same as an S.BUS output.

Included

  • Transmitter (requires four AA batteries - not included)

  • Receiver

  • Battery Tray (for four AA batteries - not included)

  • TJC8 Power Slide Switch

Downloads

Specs

Radio Frequency 2.4GHz
Range Up to 800 Meters (2625 Feet) with direct line of sight.
Receiver Input Voltage 6V nominal (3.5-7.4V)

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

Assemble a goBILDA Outlaw Chassis Kit - Plus Raspberry Pi and 8BitDo Control!

If you want a high-end robotics platform that is easy to expand with it does not get better than go...
If you want a high-end robotics platform that is easy to expand with it does not get better than go...

Control Large GoBILDA DC Motors With a Raspberry Pi - Pololu Motoron HAT

This guide will demonstrate exactly how to control any large DC Motors that we stock with a Raspber...
This guide will demonstrate exactly how to control any large DC Motors that we stock with a Raspber...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Articulated Mule

Converting a Mule into an articulated 4 wheel vehicle. A 'Mule' is/was a hand trolley with a motoris...
Converting a Mule into an articulated 4 wheel vehicle. A 'Mule' is/was a hand trolley with a motoris...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.