Search results for: 'serial display'
MAX7219 Serial Dot Matrix Display Module
Brand: Core Electronics
These modules can be mounted flush side-by-side to extend them far beyond the 8x8 matrix. For example, you could have a 8x32 matrix! At the core is a MAX7219 - a very well documented chip in the Arduino community (along with ever other flavour of micro controller).
$2.40 AUD, inc GST
I2C/TWI LCD2004 Module (Arduino/Gadgeteer Compatible)
Brand: DFRobot
I2C/TWI LCD2004 module compatible with Gadgeteer is a cool lcd display with a high speed I2C serial bus (400kHz) from DFRobot. With the limited pin resources, your project may be out of resources using normal LCD shield. The LCD display is a 4x20 character STN white display with a blue LED backlight.
$27.55 AUD, inc GST
7-Segment Serial Display - Blue
Brand: Sparkfun
4-digit 7-segment displays are really neat little devices, it’s a shame that they can be so cumbersome to control. Well we’ve solved that problem by making them a little bit “smarter.” The 7-Segment Serial Display combines a classic 4-digit 7-segment display and an ATMega328 microcontroller allowing you to control every segment individually using only a few serial lines.
$28.45 AUD, inc GST
Serial Enabled LCD Kit
Brand: Sparkfun
Calling this the “Serial Enabled LCD Kit” doesn’t do justice to how cool it actually is. After you’ve assembled this all-PTH kit, you’ll be left with a fully Arduino-compatible development board that just happens to have a white on black 16x2 display built-in.
$47.70 AUD, inc GST
USB + Serial Backpack Kit with 16x2 RGB backlight negative LCD - RGB on Black
Brand: Adafruit
Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed PCB sits on the...
$47.10 AUD, inc GST
Monk Makes 7 Segment for micro:bit
Brand: Monk Makes
The 7-segment for micro:bit is a four digit 7-segment display for micro:bit. You can use it to display numbers, but it can also display letters and other characters, albeit with the limits imposed by the 7 segments of each digit.
$21.95 AUD, inc GST
SparkFun 16x2 SerLCD - RGB Text (Qwiic)
Brand: Sparkfun
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 RGB on Black Liquid Crystal Display...
$64.50 AUD, inc GST
3-Wire LED Module 8 Digital (Arduino Compatible)
Brand: DFRobot
This is 8 digital bits serial LED display. It features a flick free display and 3-Wire interface which allows more than 2 modules can be serial linked. With our interface shield, this module can be plug and play.
$17.95 AUD, inc GST
TIMI-Click Starter Kit
Brand: Sparkfun
TIMI Click is a 0.96” TFT LCD display module that is driven directly by a PIXXI-28 graphics processor from 4D Labs...
$89.50 AUD, inc GST
SparkFun 16x2 SerLCD - RGB Backlight (Qwiic)
Brand: Sparkfun
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display...
$65.10 AUD, inc GST
SparkFun 20x4 SerLCD - RGB Backlight (Qwiic)
Brand: Sparkfun
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Crystal Display...
$84.25 AUD, inc GST
TIMI-Click
Brand: Sparkfun
TIMI Click is a 0.96” TFT LCD display module that is driven directly by a PIXXI-28 graphics processor from 4D Labs...
$67.65 AUD, inc GST
Adafruit USB + Serial LCD Backpack Add-On with Cable
Brand: Adafruit
Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed PCB can connect...
$22.95 AUD, inc GST
Similar matches
PiKVM V4 Plus
Brand: HiPi.io
PiKVM V4 Plus is the most feature-rich edition of the PiKVM Family! Manage your servers or PC remotely! PiKVM is a feature-rich, production grade, open-source, Raspberry Pi based KVM over IP device.
$549.95 AUD, inc GST
7 Segment Display (2-Wire, 0.5")
Brand: Core Electronics
Perfect for when you need to display the time or some simple sensor read-outs, all with two pins!
$1.95 AUD, inc GST
4-channel I2C-safe Bi-directional Logic Level Converter - BSS138
Brand: Adafruit
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to...
$7.40 AUD, inc GST
Rigol DS-1054Z Oscilloscope
Brand: Rigol
The Rigol DS1054Z, now stocked in Australia, represents a remarkable breakthrough in price and performance in general purpose 4 channel digital storage oscilloscopes.
$769.95 AUD, inc GST
Adafruit QT Py RP2040
Brand: Adafruit
What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite chip, the RP2040. It's been made famous in the new Raspberry Pi Pico and our Feather RP2040 and ItsyBitsy RP2040, but what if we wanted something really smol?
$18.75 AUD, inc GST
SparkFun RTK Facet
Brand: Sparkfun
The SparkFun RTK Facet is a fully enclosed GNSS receiver for centimeter-level positioning. Perfect for high precision geolocation and surveying needs...
$1379.95 AUD, inc GST
SparkFun Micro OLED Breakout (Qwiic)
Brand: Sparkfun
The SparkFun Qwiic Micro OLED Breakout is a Qwiic enabled version of our popular MicroView and micro OLED display!...
$21.55 AUD, inc GST
Elektor 6-Channel Temperature Monitor & Logger – Partly Assembled Module
Brand: Sparkfun
The 6-Channel Temperature Monitor can measure temperatures from as low as -240°C up to +850°C (real-world limits greatly depend on the sensors being used). Up to...
$189.95 AUD, inc GST
Rigol DS-1202Z-E Oscilloscope
Brand: Rigol
DS1000Z-E series is a high-performance and economic digital oscilloscope designed for the designing, debugging and educational requirements of the mainstream digital oscilloscope market.
$717.95 AUD, inc GST
SparkFun RTK Express
Brand: Sparkfun
The SparkFun RTK Express is an easy to use GNSS receiver for centimeter-level positioning. Perfect for surveying, logging, and all types of post processing...
$904.95 AUD, inc GST
Coin Acceptor - Programmable (6 coin types)
Brand: Sparkfun
Are you trying to make a quick dime from electronics? Why limit yourself to dimes? This coin acceptor will take up to 6 different kinds of coin! Whether you’re building your own arcade cabinet or just charging admission to your house, this programmable coin acceptor makes it easy to monetize your next project.
$149.95 AUD, inc GST
SparkPNT RTK Facet mosaic L-Band
Brand: Sparkfun
Designed and manufactured in Boulder, Colorado, USA, and utilizing the multi-band mosaic-X5 from Septentrio, the SparkPNT RTK Facet mosaic L-Band is the...
$2824.95 AUD, inc GST
Adafruit PyPortal Titano
Brand: Adafruit
he PyPortal Titano is the big sister to Adafruit's popular PyPortal now with twice as many pixels!
$109.95 AUD, inc GST
SparkFun Large Digit Driver
Brand: Sparkfun
The SparkFun Large Digit Driver is a chainable controller backpack that can be soldered directly to the back of our large 6.5" 7-segment displays. Large numerical displays are a great addition to any project where you want to be able to see information at a distance. Scorekeepers and lap timers would be a great application for large 7-segment LED displays.
$16.65 AUD, inc GST
DS1104Z PLUS Oscilloscope (Includes Options Bundle)
Brand: Rigol
DS1104Z Plus Oscilloscope with Options Bundle. 100MHz, 4CH, 1GS/s, MSO Upgradable.
$1104.95 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.