Search results for: 'sensor cable'
Learn
PiicoDev Cable 50mm
Brand: PiicoDev
This 50mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.80 AUD, inc GST
PiicoDev Cable 100mm
Brand: PiicoDev
This 100mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.85 AUD, inc GST
PiicoDev Cable 200mm
Brand: PiicoDev
This 200mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.98 AUD, inc GST
Raspberry Pi Camera FPC Adapter Cable 200mm
Brand: Raspberry Pi
These cables enable communication between the Raspberry Pi 5 and current CSI-connected camera products.
$1.83 AUD, inc GST
Flexible Qwiic Cable - 100mm
Brand: Sparkfun
This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$3.80 AUD, inc GST
Raspberry Pi Camera FPC Adapter Cable 300mm
Brand: Raspberry Pi
These cables enable communication between the Raspberry Pi 5 and current CSI-connected camera products.
$3.55 AUD, inc GST
Raspberry Pi Camera FPC Adapter Cable 500mm
Brand: Raspberry Pi
These cables enable communication between the Raspberry Pi 5 and current CSI-connected camera products.
$5.38 AUD, inc GST
Gravity 4Pin IIC/I2C/UART Sensor Cable (10pcs)
Brand: DFRobot
The Gravity 4Pin IIC/I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 30cm length. One side is PH2.0-4p connector and the other side is XH2.54...
$10.50 AUD, inc GST
Flexible Qwiic Cable - 50mm
Brand: Sparkfun
This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$2.75 AUD, inc GST
Flex Cable for Raspberry Pi Camera - 1 metre
Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$8.25 AUD, inc GST
Sensor Cable - Electrode Pads (3 connector)
Brand: Sparkfun
This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set.
$17.60 AUD, inc GST
Gravity: Digital Sensor Cable for Arduino - 30cm (10 Pack)
Brand: DFRobot
The digital sensor cables are especially designed for the DFRobot popular IO Expansion shield and sensors. It connects most of their digital sensor to the IO board.
This price includes 10 pieces of cables.
$9.95 AUD, inc GST
Gravity: Analog Sensor Cable for Arduino - 50cm (10 Pack)
Brand: DFRobot
This high-quality 50cm analog sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially...
$11.50 AUD, inc GST
Gravity: Digital Sensor Cable for Arduino - 50cm (10 Pack)
Brand: DFRobot
This high-quality 50cm digital sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially...
$11.60 AUD, inc GST
3-Pin Female JST PH-Style Cable for Sharp Distance Sensors (30cm)
Brand: Pololu
This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
$3.25 AUD, inc GST
3-Pin Female JST ZH-Style Cable (30cm) for Sharp GP2Y0A51 Distance Sensors
Brand: Pololu
This 12-inch (30-cm) cable has 28 AWG wires and a 3-pin female JST ZH-style connector that mates with the 3-pin connector on Sharp GP2Y0A51 analog...
$3.25 AUD, inc GST
Gravity: 4Pin I2C/UART Sensor Cable for Arduino - 50cm (10 Pack)
Brand: DFRobot
The Gravity 4Pin I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 50cm length. One side is PH2.0-4p connector and the other side is XH2.54 DuPont...
$11.60 AUD, inc GST
Flex Cable for Raspberry Pi Camera - 2 metre
Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$12.40 AUD, inc GST
Active Cable Extension Kit for RPi Camera Modules
Brand: Arducam
Extend your Raspberry Pi camera connection up to 15 meters.
$82.65 AUD, inc GST
Analog Sensor Cable For Arduino (10 Pack)
Brand: DFRobot
The analog sensor cables are especially designed for DFRobot's popular IO Expansion shield and sensors. It connects most of our analog sensor to the IO board.
$9.95 AUD, inc GST
Flex Cable for Raspberry Pi Camera - 50mm / 2"
Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$3.95 AUD, inc GST
Gravity Sensor Cable For LattePanda (10 Pack)
Brand: DFRobot
These wire offers you the best way to connect sensors and actuators to your LattePanda! They are specially designed for LattePanda and DFRobot Gravity Sensors. It...
$10.20 AUD, inc GST
3-Pin Female JST PH-Style Cable (30 cm) with Male Pins for 0.1" Housings
Brand: Pololu
This 12-inch (30-cm) cable has 26 AWG wires with a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with male pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
$4.95 AUD, inc GST
3-Pin Female JST PH-Style Cable (30 cm) with Female Pins for 0.1" Housings
Brand: Pololu
This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with female pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
$4.95 AUD, inc GST
JST-SH 3-Pin connector for Grow Moisture Sensor (Pack of 3)
Brand: Pimoroni
Flexible white JST-SH cables, ideal for using with our Grow soil moisture sensors.
$7.70 AUD, inc GST
MyoWare 2.0 Reference Cable
Brand: Sparkfun
The MyoWare® 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin...
$2.30 AUD, inc GST
Open logic sniffer probe cable (Seeed Studio)
Brand: Seeed Studio
This is the probe cable for Open workbench Logic sniffer. It has a 1×9 connector and 9 leads with tweezer-style test clips. These are the same tweezer-clips...
$13.40 AUD, inc GST
Infrared Sensor Jumper Wire - 3-Pin JST-PH
Brand: Sparkfun
Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save you 15-20 minutes over making your own wiring harness.
$2.75 AUD, inc GST
20cm PH2.0-4P Male-to-Male Cable for Boson & UNIHIKER (10-Pack)
Brand: DFRobot
20cm PH2.0-4P male-to-male cables feature 4-pin polarized connectors for secure connections in Boson, UNIHIKER & STEM projects. 10 cables included...
$14.35 AUD, inc GST
24AWG White 4 Core Security Cable (per metre)
Brand: Core Electronics
If you need data and power somewhere far from your control box - grab some of this cable!
$1.05 AUD, inc GST
Adafruit CSI or DSI Cable Extender Thingy for Raspberry Pi
Brand: Adafruit
Every time someone posts on the Adafruit forums and says they need to have a really long cable for their Pi Camera (CSI) or Pi Display (DSI), Adafruit say, "Oh you mean...
$5.95 AUD, inc GST
Digital Tilt Sensor (Arduino Compatible)
Brand: DFRobot
This is a digital tilt switch. It can be used as a simple tilt sensor. Simply plug to your microcontroller of choice and you can make amazing interactive projects!
$3.30 AUD, inc GST
Arduino Sensor Kit - Base
Brand: Arduino
Learn to Plug, Sketch and Play with basic Grove sensors, actuators and Arduino. All the modules are pre-wired on the PCB, just connect your Arduino Board to the Shield and start your measurements!
$72.55 AUD, inc GST
Gravity: Heart Rate Monitor Sensor
Brand: DFRobot
The DFRobot Heart Rate Monitor Sensor is used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG and output as an analog reading. An ECG signal can be extremely noisy so we have included an AD8232 chip on the PCB which will provide a clear signal from the PR and QT Intervals. Using the Arduino IDE "Serial Plotter" feature you are also able to view plotted ECG output on your PC!
$33.25 AUD, inc GST
Study Pack of HUSKYLENS for micro:bit
Brand: DFRobot
The Study Pack of HUSKYLENS for micro:bit is an HuskyLens extension kit based on micro:bit programming. It is suitable for students aged 8-19. Centered...
$92.65 AUD, inc GST
Servo Extension Cable 6" Female - Female
Brand: Pololu
This 6-inch (150-mm), flat cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller.
$6.20 AUD, inc GST
LM35 Analog Linear Temperature Sensor
Brand: DFRobot
The DFRobot LM35 Linear Temperature Sensor is based on the semiconductor LM35 temperature sensor. The DFRobot LM35 Linear Temperature Sensor can be used to detect ambient air temperature.
$7.55 AUD, inc GST
Gravity 4Pin Sensor Adapter
Brand: DFRobot
This is Gravity 4Pin sensor adapter which is special designed for 4Pin sensor. We have optimized its connection interface to make it compatible with gravity interface...
$5.20 AUD, inc GST
Digital RED LED Light Module
Brand: DFRobot
This red LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield.
$2.50 AUD, inc GST
Arduino Explore IoT Kit Rev2
Brand: Arduino
Create, collaborate, impact: teach students how to use IoT technologies and design thinking to solve real-world challenges.
$304.95 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.