Search results for: 'spi cable'
6-Conductor Ribbon Cable with IDC Connectors 12"
Brand: Pololu
This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins.
$6.65 AUD, inc GST
PiicoDev Cable 500mm
Brand: PiicoDev
This 500mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$1.35 AUD, inc GST
JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long
Brand: Adafruit
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch...
$1.90 AUD, inc GST
Raspberry Pi GPIO 40-Pin Ribbon Cable
Brand: Core Electronics
Extend your Raspberry Pi's functionality with this rainbow ribbon cable!
$3.70 AUD, inc GST
Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long
Brand: Adafruit
Are you a maker in the midst of a STEMMA dilemma? This 100mm long cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one end, and...
$3.85 AUD, inc GST
Gravity 4Pin IIC/I2C/UART Sensor Cable (10pcs)
Brand: DFRobot
The Gravity 4Pin IIC/I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 30cm length. One side is PH2.0-4p connector and the other side is XH2.54...
$10.20 AUD, inc GST
USB To UART/I2C/SPI/JTAG Converter
Brand: Waveshare
USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V, Multiple Protection Circuits, Multiple Systems Support,...
$28.55 AUD, inc GST
GPIO Ribbon Cable 2x8 IDC Cable - 16 pins 12 long
Brand: Adafruit
Connect this to that! If you want to bridge those contacts out onto another PCB, you'll want this GPIO Ribbon Cable! Comes in a classic Adafruit Black, has a nice...
$4.75 AUD, inc GST
40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long
Brand: Adafruit
That new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input/output) pins, and for those of Adafruit who like to hack electronics, they are where the real fun lies
$8.10 AUD, inc GST
GPIO Ribbon Cable 2x10 IDC Cable - 20 pins 12" long
Brand: Adafruit
Connect this to that! If you want to bridge those contacts out onto another PCB, you'll want this GPIO Ribbon Cable! Has a nice soft flexible 20-line...
$5.20 AUD, inc GST
6-pin Socket/Socket IDC cable - 6
Brand: Adafruit
Connect this to that with an IDC cable! This cable has 6 pins (2x3) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto...
$3.90 AUD, inc GST
GPIO Ribbon Cable for Raspberry Pi Model A and B - 26 pin
Brand: Adafruit
That new Raspberry Pi® Model A or B computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and...
$6.75 AUD, inc GST
5-pin (Arduino MKR) to 4-pin JST SH STEMMA QT / Qwiic Cable - 100mm long
Brand: Adafruit
Are you a maker in the midst of a STEMMA dilemma? This 100mm long cable is a fantastic chimera-cable fitted with STEMMA QT 4-pin JST SH on one end, and Arduino MKR...
$2.85 AUD, inc GST
Adafruit Pi T-Cobbler Plus Kit Breakout for 2x20 Raspberry Pi - RasPi A+, B+, Pi 2, Pi 3, Zero
Brand: Adafruit
The Raspberry Pi A+/B+/Pi 2/Pi 3/Zero has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can...
$16.15 AUD, inc GST
Similar matches
PiicoDev Cable 100mm
Brand: PiicoDev
This 100mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.85 AUD, inc GST
PiicoDev Atmospheric Sensor BME280
Brand: PiicoDev
Measure temperature, humidity, and barometric pressure. Use it to build your own weather station or perform experiments.
$23.50 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long
Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with...
$1.95 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long
Brand: Adafruit
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm...
$2.55 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long
Brand: Adafruit
This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...
$3.25 AUD, inc GST
Adafruit LSM6DSO32 6-DoF Accelerometer and Gyroscope - STEMMA QT / Qwiic
Brand: Adafruit
Behold, the ST LSM6DSO32: The latest in a long line of quality Accelerometer+Gyroscope 6-DOF IMUs from ST. This lil IMU is like a big sister to the LSM6DSOX, it has the same pin out and firmware - but the accelerometer component can go up to 32g instead of the normal 16g maximum.
$24.35 AUD, inc GST
ESP32-S3 Mini Development Board - USB Adapter Board Included
Brand: Waveshare
ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, USB Port Adapter Board Optional...
$9.85 AUD, inc GST
1.47 Inch LCD Display (172x320 Pixels with Rounded Corners)
Brand: Waveshare
1.47inch LCD Display Module, Rounded Corners, 172x320 Resolution, SPI Interface...
$16.50 AUD, inc GST
1.8inch RGB LCD display (128x160 pixels)
Brand: Waveshare
1.8inch diagonal, 128x160 pixels, with embedded controller, communicating via SPI interface.
$15.05 AUD, inc GST
Assembled Pi T-Cobbler Plus - GPIO Breakout
Brand: Adafruit
This is the assembled version of the Pi T-Cobbler Plus. This cobbler will break out your Pi's GPIO pins, with a labelled circuit board making prototyping easy like it should be.
$17.10 AUD, inc GST
W5100 Ethernet + SD Card Shield (Arduino Compatible)
Brand: Core Electronics
The Ethernet Shield for Arduino is based on the Wiznet W5100 and connects your Arduino-compatible board to the internet a few minutes. Simply plug this module onto board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet.
$9.15 AUD, inc GST
0.71inch Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K colors
Brand: Waveshare
0.71inch Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K colors...
$16.80 AUD, inc GST
Adafruit 1.9" 320x170 Color IPS TFT Display - ST7789
Brand: Adafruit
This lovely little display breakout is the best way to add a small, colorful, and very bright display to any project.
$33.65 AUD, inc GST
Pimoroni Touch – HyperPixel 4.0 - Hi-Res Display for Raspberry Pi
Brand: Pimoroni
HyperPixel 4.0 is the perfect way to use your Pi without a bunch of cables or a bulky display. Design your own interface to control your project, display data, or turn your Pi into a tiny media center.
$114.95 AUD, inc GST
Adafruit Ethernet FeatherWing
Brand: Adafruit Feather
Wireless is wonderful, but sometimes you want the strong reliability of a wire. If your Feather board is going to be part of a permanent installation, this Ethernet...
$39.80 AUD, inc GST
Waveshare 10.1inch LCD 1024×600
Brand: Waveshare
A large 10inch display with a 1024x600 resolution, perfect for a portable workstation which works with a variety of mini PC's like Raspberry Pi
$129.95 AUD, inc GST
Pixy2 CMUcam5
Brand: Sparkfun
The Pixy2 CMUcam5 is smaller, faster and more capable than the original Pixy. Like its predecessor, the Pixy2 can learn to detect objects that you teach it, just...
$264.95 AUD, inc GST
ST25R3911B NFC Evaluation Kit, NFC Reader + TF Card + USB Cable
Brand: Waveshare
ST25R3911B NFC Evaluation Kit, NFC Reader, Ideal for Refreshing Passive NFC-Powered e-Papers...
$64.30 AUD, inc GST
Pimoroni Yellow/Black/White – Inky wHAT (ePaper/eInk/EPD)
Brand: Pimoroni
Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi
$114.95 AUD, inc GST
ArduCam Mega 3MP Camera
Brand: Arducam
The most versatile camera made for microcontrollers.
$41.55 AUD, inc GST
Logic Pirate (Seeed Studio)
Brand: Seeed Studio
The Logic Pirate is an inexpensive, yet capable open source logic analyzer. It can sample 8 channels at 20 million samples per second, and may be overclocked...
$61.50 AUD, inc GST
Fingerprint Sensor (GT-NUCL1633)
Brand: Sparkfun
The GT-NUCL1633K1 is the latest miniature fingerprint sensor with extensive enhancements on power consumption and user flexibility from ADH-Tech...
$50.40 AUD, inc GST
Adafruit 1.69" 280x240 Round Rectangle Color IPS TFT Display - ST7789
Brand: Adafruit
Don't be such a square - throw a curve-ball into your electronics with a curved-edge miniature display. Here's a new "round rect" TFT...
$33.55 AUD, inc GST
Adafruit PiTFT Plus Assembled 320x240 2.8 TFT + Capacitive Touchscreen
Brand: Adafruit
Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay. That's right...
$89.15 AUD, inc GST
UM7 Orientation Sensor
Brand: Pololu
The UM7 orientation sensor from Redshift Labs is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and...
$269.95 AUD, inc GST
SparkFun GPS-RTK-SMA Kit
Brand: Sparkfun
The SparkFun GPS-RTK-SMA Kit comes with just what you need to get started using GPS Real Time Kinematics and the u-blox ZED-F9P...
$579.95 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.