Search results for: 'gpio cable'
Raspberry Pi GPIO 40-Pin Ribbon Cable
Brand: Core Electronics
Extend your Raspberry Pi's functionality with this rainbow ribbon cable!
$3.70 AUD, inc GST
Raspberry Pi B - GPIO Ribbon Cable (40-pin, 150mm)
Brand: SparkFun
This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity.
$9.15 AUD, inc GST
GPIO Ribbon Cable 2x8 IDC Cable - 16 pins 12 long
Brand: Adafruit
Connect this to that! If you want to bridge those contacts out onto another PCB, you'll want this GPIO Ribbon Cable! Comes in a classic Adafruit Black, has a nice...
$4.75 AUD, inc GST
40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long
Brand: Adafruit
That new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input/output) pins, and for those of Adafruit who like to hack electronics, they are where the real fun lies
$8.10 AUD, inc GST
GPIO Ribbon Cable 2x10 IDC Cable - 20 pins 12" long
Brand: Adafruit
Connect this to that! If you want to bridge those contacts out onto another PCB, you'll want this GPIO Ribbon Cable! Has a nice soft flexible 20-line...
$5.20 AUD, inc GST
GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2/Pi 3/ Pi 4 - (40 pins)
Brand: Adafruit
That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for...
$7.60 AUD, inc GST
40-pin 0.5mm pitch FPC Flex Cable with A-B Connections - 25cm long
Brand: Adafruit
Use this 25 cm long cable with our 40-pin FPC to 2x20 IDC Plug and Socket adapter PCBs to extend your Raspberry Pi's GPIO capabilities. Note you'll have to keep an eye on where Pin 1 is on the ribbon cable, on the adapter PCBs, and your HAT or Bonnet of choice.
$2.10 AUD, inc GST
GPIO Ribbon Cable for Raspberry Pi Model A and B - 26 pin
Brand: Adafruit
That new Raspberry Pi® Model A or B computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and...
$6.75 AUD, inc GST
Downgrade GPIO Ribbon Cable for Pi A+/B+/Pi 2/Pi 3 - 40p to 26p
Brand: Adafruit
Oof - you got a Raspberry Pi Model A+ or B+ that you want to have work with some old kit or plate or breakout or something and it uses the classic 26-pinout. Very...
$6.60 AUD, inc GST
40-pin Raspberry Pi GPIO Breakout
Brand: Core Electronics
If you're after a quick and easy to way to connect external circuitry up to your Raspberry Pi, then look no further! This breakout board has a form factor perfect for connecting to breadboards using the included 40-pin ribbon cable.
$5.65 AUD, inc GST
Prototyping Kit for Raspberry Pi
Brand: Core Electronics
Everything you need to start prototyping and experimenting with the Raspberry PI's GPIO headers and physical computing. It even includes a handy case to keep your project in!
$17.40 AUD, inc GST
Assembled Pi T-Cobbler Plus - GPIO Breakout
Brand: Adafruit
This is the assembled version of the Pi T-Cobbler Plus. This cobbler will break out your Pi's GPIO pins, with a labelled circuit board making prototyping easy like it should be.
$17.10 AUD, inc GST
10-pin Socket/Socket IDC cable - 6
Brand: Adafruit
Connect this to that with an IDC cable! This cable has 10 pins (2x5) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto...
$4.35 AUD, inc GST
Pimoroni Mini Black HAT Hack3r
Brand: Pimoroni
Need to detach or debug your HAT? Then the Mini Black HAT Hack3r is for you!
$33.20 AUD, inc GST
Rainbow 34-pin Dual Row IDC Floppy Ribbon Cable - 30cm long
Brand: Adafruit
Often used for floppy drives, 34 pin IDC cables have a 2x17 array of pins. This cable will let you connect one port to another with a festive rainbow...
$8.20 AUD, inc GST
6-pin Socket/Socket IDC cable - 6
Brand: Adafruit
Connect this to that with an IDC cable! This cable has 6 pins (2x3) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto...
$3.90 AUD, inc GST
6-Conductor Ribbon Cable with IDC Connectors 12"
Brand: Pololu
This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins.
$6.65 AUD, inc GST
Pimoroni 1.5m long power cable for Wide Input SHIM
Brand: Pimoroni
Power your Pi with a wide range of (DC) input voltages from 3 to 16V!
$8.50 AUD, inc GST
IDC Breakout Helper - 2x20 (40 pin)
Brand: Adafruit
The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for Adafruit's popular GPIO Ribbon Cable for Raspberry...
$5.20 AUD, inc GST
40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter
Brand: Adafruit
Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter.
$6.25 AUD, inc GST
40-pin FPC to Straight 2x20 IDC Male Plug Header
Brand: Adafruit
Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Straight 2x20 IDC Male Plug Header Adapter
$6.20 AUD, inc GST
SparkFun Pi Wedge (Preassembled)
Brand: SparkFun
This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-friendly arrangement and spacing, and even adds a couple of decoupling capacitors on the power supply lines. The “Wedge” also makes the initial bring-up process easier - you can plug an FTDI Basic module into the built-in serial port. Each version of this Pi Wedge comes preassembled and can be inserted into the RPi’s GPIO port that allows you to prototype - no soldering required!
$28.60 AUD, inc GST
Pimoroni pHAT Stack
Brand: Pimoroni
A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHATs at once.
$44.55 AUD, inc GST
Adafruit Perma-Proto 40-Pin Raspberry Pi Half-Size PCB Kit - with 2x20 Header
Brand: Adafruit
We put a PermaProto half-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the 40-Pin PermaProto for Pi! It has the Cobbler...
$12.10 AUD, inc GST
Similar matches
PiicoDev Prototyping Cable (Male) 200mm
Brand: PiicoDev
This 200mm cable breaks out the four wires in a PiicoDev cable for manual wiring to breadboards or development boards. It's a 4-wire harness with an SH connector on one end and four Dupont-style connectors on the other.
$0.95 AUD, inc GST
PiicoDev Cable 500mm
Brand: PiicoDev
This 500mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$1.35 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long
Brand: Adafruit
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead...
$1.85 AUD, inc GST
1.25mm Pitch 4-pin Cable 20cm long 1:1 Symmetric Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.85 AUD, inc GST
Gravity: 4Pin I2C/UART Sensor Cable for Arduino - 50cm (10 Pack)
Brand: DFRobot
The Gravity 4Pin I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 50cm length. One side is PH2.0-4p connector and the other side is XH2.54 DuPont...
$11.32 AUD, inc GST
Flex Cable for Raspberry Pi Camera - 100mm / 4"
Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$3.65 AUD, inc GST
JST SH-Style Cable, 2-Pin, Female-Female, 25cm
Brand: Pololu
This 2-conductor, 25 cm (10") cable has 28 AWG wires and 2-pin female JST SH-type connectors on both ends...
$2.60 AUD, inc GST
Analog Sensor Cable For Arduino (10 Pack)
Brand: DFRobot
The analog sensor cables are especially designed for DFRobot's popular IO Expansion shield and sensors. It connects most of our analog sensor to the IO board.
$9.49 AUD, inc GST
Gravity: Analog Sensor Cable for Arduino - 50cm (10 Pack)
Brand: DFRobot
This high-quality 50cm analog sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially...
$11.18 AUD, inc GST
6-Pin Female-Female JST SH-Style Cable 25cm
Brand: Pololu
This 25 cm (10") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$6.85 AUD, inc GST
3-Pin Female JST PH-Style Cable (30 cm) with Male Pins for 0.1" Housings
Brand: Pololu
This 12-inch (30-cm) cable has 26 AWG wires with a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with male pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
$4.95 AUD, inc GST
Raspberry Pi Pico Debug Cable
Brand: SparkFun
This 3 Pin JST-SH Cable is a 30cm cable for solderless Serial Wire Debug (SWD) connections for Raspberry Pi Pico, Pico H, and Pico WH boards. It features...
$6.30 AUD, inc GST
22-Pin 0.5mm Pitch FPC Cable - 10cm
Brand: SparkFun
A 22-pin, 100mm flat, flexible cable with 0.5mm pitch. These cables are A-B style, so pin one on one side will match with pin one on the other side. Use...
$0.92 AUD, inc GST
1.25mm Pitch 6-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have...
$2.45 AUD, inc GST
1.25mm Pitch 10-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$2.80 AUD, inc GST
1.25mm Pitch 9-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$2.50 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.