MyoWare 2 Muscle Sensor Wireless Kit

SKU: KIT-27922 Brand: Sparkfun

The MyoWare® 2 Muscle Sensor Wireless Kit is an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides everything you need from...

Special Price $207.90 AUD, inc GST

Regular Price $244.90 AUD, inc GST

$189.00 AUD, exc GST

Special pricing ends 16 November 2025

* this special may end earlier than shown

Out of Stock

The MyoWare® 2 Muscle Sensor Wireless Kit is an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides everything you need from the MyoWare 2 ecosystem to test out wireless configurations for your application. The MyoWare® 2 Wireless Shield is designed to receive readings from the MyoWare 2 Muscle Sensor and wirelessly transmit sensor data with the included ESP32-WROOM. This shield also includes a built-in LiPo battery to power the muscle sensor and the ESP32 module remotely. The Wireless Shield is equipped with snap connectors and low-profile pogo pins on the board, allowing you to easily stack it on top of the MyoWare 2 Muscle Sensor. Simply select a Power Source and flip the power switch to the ON position to give the sensor all the power it needs to work its myoelectric magic.

The kit also includes 20 biomedical sensor pads, a mini screwdriver for easy removal of shields, a USB A to C cable for recharging the wireless shield or connecting your microcontroller to a computer, a sensor cable for connecting to muscle groups away from the sensor, and a Myoware cable shield.

The MyoWare 2 Muscle Sensor included in this kit has been redesigned from the ground up with a new, easy-to-use, compact design and upgraded with the latest and greatest chipset, improving sensor performance and reliability. The sensor measures muscle activity through the electric potential of the muscle, commonly referred to as surface electromyography (EMG or sEMG for short). When your brain tells your muscle to flex, it sends an electrical signal to your muscle to start recruiting motor units (the bundles of muscle fibers that generate the force behind your muscles).

The harder you flex, the more motor units are recruited to generate greater muscle force. The greater the number of motor units, the more the electrical activity of your muscle increases. The MyoWare 2 Muscle Sensor analyzes a muscle's filtered and rectified electrical activity, outputting a signal (0-VIN volts, where VIN represents the voltage of the power source) that indicates the degree of muscle flexion. The innovative connector system eliminates the need to solder connections for the MyoWare 2 ecosystem, whether visualizing the muscles in action with the MyoWare 2 LED Shield or reading the analog output with an Arduino-compatible development board.

Documentation

MyoWare 2 Wireless Shield

Board Dimensions
Hookup Guide
Advancer Technologies: MyoWare® 2
- Patents^[1]
MCP73831 Datasheet
Polymer Lithium Ion Battery (40mAh)
- Datasheet
- MSDS
MyoWare Arduino Library
MyoWare 2 Ecosystem Page

^{[1] Note: This product is patent protected. To prevent counterfeit boards, the Eagle design files and GitHub hardware repository are not shared for boards in the MyoWare 2 ecosystem.}

MyoWare 2 Muscle Sensor

^{[1] Note: This product is patent protected. To prevent counterfeit boards, the Eagle design files and GitHub hardware repository are not shared for boards in the MyoWare 2 ecosystem.}

SparkFun ThingPlus - ESP32 WROOM (USB-C)

This product is listed in:

Sensors>Biometric
Sensors>Kits

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review