empowering creative people

Raspberry Pi > Camera

Flex Cable for Raspberry Pi Camera - 1 meter

SKU: ADA2143

$7.50 AUD, inc GST
$6.82 AUD, exc GST

More Views

Flex Cable for Raspberry Pi Camera - 1 meter
7.5 AUD

SKU: ADA2143

$7.50 AUD, inc GST
$6.82 AUD, exc GST
6 reviews 0 5 5
Quantity Discounts:
10+ $5.227 (exc GST)

Shipping:

  • $6.95 Standard (2-4 days, tracked)
  • $9.95 Express (Overnight*, tracked)
  • $3 Economy Post* (3-7 days, no tracking)
  • FREE Pickup (Newcastle only)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.

This cable is 1000mm long. Adafruit have cables in 50mm, 100mm, 200mm, 300mm, 457mm,610mm and 1000mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but Adafruit have those in the shop as well)

Flex Cable for Raspberry Pi Camera - 1000mm / 24" (12:27)

Technical Details

  • Dimensions: 1000mm x 16mm  (3.3ft x 0.6")
  • Weight: 7.5g

This product is listed in:

Documentation and Resources:
Educational Workshops
  • Raspberry Pi Workshop for Beginners
  • Welcome to the Raspberry Pi Workshop for Beginners! Here you'll be able to follow along with our series of bite-sized videos that cover everything you'll need to know to get started with your Raspberry Pi, and start making awesome projects. My name...
  • Rain Gauge Data Logger
  • Summary A Raspberry Pi 3B is used to collect digital counts from an electronic rain gauge (1mm of rain per reed switch closure by magnetic see-saw). It has been running without issues for over 12 months. A UPS powers the Pi so it is immune from short power glitches. The total count is displayed on an LCD screen with reset and inc/dec test buttons. “To HTML” and “To LCD” routines are also included to simp...
  • Television Media Centre
  • Introduction: I have a flat screen television that is about 7 years old that I purchased before Smart TVs were commonly available. What I wanted to achieve with My Pi project was to turn my slightly old TV into a media centre. I wanted to play music through my TV as well as play saved movies and stream internet content. It was important for me to be able to stream ABC iView and SBS On Demand as they provide a free service and ...
  • Raspberry pi Photo Booth
  • This project is a raspberry pi powered photo both. It uses a raspberry pi zero and the raspberry pi camera. All the code has been uploaded to GitHub for you. It has a ten-second timer, from when you press the button, and then it takes 4 images, there is a led to indicate timer and photo status....
  • Mass SD card Image Writer
  • We've built a mass SD card writer using a Raspberry Pi 3 Model B, some USB hubs and SD card readers. This beast has enough ports to write 49 SD cards at once! At Core Electronics, sometimes logistics hang-ups mean that suppliers cannot meet our demand for pre-flashed SD cards. During these periods we have to pick up the slack by manually imaging blank SD cards we source ourselves. Of course, this is a super-tedious process, and ...
  • Raspberry Pi IoT Doorbell
  • This Raspberry Pi, IoT Doorbell is basically a simple smart Door Bell, which takes a photo of whoever rings it, and emails it to the specified email address, and keeps all the photos in a folder. (along with going Ding-Dong). Any Problems, just leave a comment/start a discussion below....

Product Comments


Customer Reviews

  1. Review by Vincent verified purchaser
    Rating
    100

    Works as stated.
    Good cable (Posted on 18/01/2019)

  2. Review by Justin verified purchaser
    Rating
    100

    Yep it works (Posted on 8/10/2018)

  3. Review by Samuel verified purchaser
    Rating
    100

    Good item, just like the RPi camera cable.. only longer. (Posted on 10/09/2018)

  4. Review by Chris verified purchaser
    Rating
    100

    Great product, allows me to have the camera further from the Pi to use as a monitoring camera for my 3D Printer. (Posted on 1/03/2018)

  5. Review by Aubry verified purchaser
    Rating
    100

    Good cable, easy to mount between the PiCam and the Raspberry Pi. (Posted on 5/09/2017)

  6. Review by Iain verified purchaser
    Rating
    100

    Great quality (Posted on 4/04/2017)

Exact shipping can be calculated on the view cart page (no login required).

We deliver Australia-wide with these options:

  • $3 for Small Items (3-7 days, not tracked, only available on selected small items)
  • $6.95 for Standard Post (2-4 days, tracked)
  • $9.95 for Express Post (Overnight for most of Australia, 2+ days for rural, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (only after we email you to notify your order is ready)

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11.49 for Pack and Track (3+ days, tracked)
  • $16.50 for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount might increment based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!