Search results for: 'raspberry pi 3 kit'

A low-cost pack of heat sinks that are perfectly sized for the Raspberry Pi. Attach each heat sink to the Pi using the attached self-adhesive layer, and get your Pi running 10 degrees cooler.

The Raspberry Pi 3 Model B+ (note the plus on the end) was released by the Raspberry Pi Foundation on 14 March 2018.

The Official Raspberry Pi A+ Case has been designed to fit both the Pi 3 Model A+ and the Pi 1 Model A+.

Everything you need to start prototyping and experimenting with the Raspberry PI's GPIO headers and physical computing. It even includes a handy case to keep your project in!

It's 10 PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds Adafruit's celebrated Ultimate GPS on it, so you...

Get started coding high-tech sensors and modules with the PiicoDev® Starter Kit - BYO Raspberry Pi.

Make your Raspberry Pi seriously cool with Fan SHIM! This 30mm no-solder, controllable CPU fan with RGB LED and tactile switch will give your Raspberry Pi significantly better thermal performance.

Hey Mr. DJ! Turn up that Raspberry Pi mix to the max with this cute 3W Stereo Amplifier Bonnet for Raspberry Pi. (It's not big enough to be an official HAT, so they...

The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive...

Effortlessly mount any standard Pi HAT onto your Raspberry Pi 3, 4, or 5, even with a bulky cooling fan or heat sink installed. This harware kit provides...

You can now create a dazzling display with your Raspberry Pi Model A+/B+/Pi 2, 3, or 4 with the Adafruit RGB Matrix HAT. This HAT plugs into your Pi and makes it...

A uniquely square, high-resolution, high-speed, 4.0" display for Raspberry Pi – it's hip to be square!

Give your next animatronic or robotic project the gift of eyes with this Snake Eyes Bonnet Pack for Raspberry Pi. The Snake Eyes bonnet is an accessory for driving...

The cute PiTFT got even more adorable with this little primary display for Raspberry Pi in HAT form! It features a 2.2" display with 320x240 16-bit color pixels...

What's better than Adafruit's 2.8" 320x240 and 3.5" 480x320 PiTFT Pluses? How about a custom-designed enclosure for said PiTFTs, in a handsome midnight-blue? Crafted out...

If you have a Raspberry Pi LoRa project using Adafruit's fancy 8-Channel LoRa HAT you want enclosed, and need something extra durable, this enclosure is absolutely perfect...

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+ and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors. The board can deliver a continuous 1.2 A (1.5 A peak) per motor, or a continuous 2.4 A (3 A peak) to a single motor when configured with both channels connected in parallel.

The Raspberry Pi A+/B+/Pi 2/Pi 3/Zero has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can...

We put a PermaProto half-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the 40-Pin PermaProto for Pi! It has the Cobbler...

The third in the series is here! The CamJam EduKit #3 is focused on robotics and contains (almost) everything you need to create your very own Raspberry...

The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each...

The Motoron M3H550 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each...

We put a PermaProto full-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the 40-Pin PermaProto for Pi! It has the Cobbler...

Want another CamJam EduKit 3 motor controller board? You’ve come to the right place! Our pre-soldered motor controller board has been custom-designed...

Tired of webpages that are chock-full of ads and malware - impossible to use? This kit will make a Raspberry Pi 3 act as a DNS (Domain Name Server) The kind of device...

The CamJam EduKit #2 is the latest edition to the EduKit family for your Raspberry Pi! CamJam EduKits are your way into the world of building electronic...

The Snake Eyes Bonnet is a Raspberry Pi accessory for driving two 128x128 pixel OLED or TFT LCD displays, and also provides four analog inputs for sensors. It's...

Playing retro games is easy on a Raspberry Pi - and that pocket-sized computer is pretty good at it too! All you need is a little help to connect buttons and a joystick...

with PoE Functionality, Front Removable 19" 1U Rack Mount with Captive Screws, Supports Up to 5 Rpis

This add-on board enables a compatible Raspberry Pi (Model B+ or newer), including the Pi 3 Model B+ and Model A+, to drive a pair of brushed DC motors....

This advanced kit provides a cost effective solution for a high performance, color touch screen Spectrum Analyzer covering 15MHz to 2700MHz. Included in the package kit are these these items: