Search results for: 'pulse width modulation hat'
Servo PWM Pi
Brand: AB Electronics
The Servo PWM Pi is a 16-channel, 12-bit PWM controller for the Raspberry Pi, suitable for driving LEDs and radio control servos. The board is based around PCA9685 PWM I2C LED controller IC from NXT and can drive each of the 16 outputs with 12 bit (4096 steps) duty cycle from 0% to 100%.
$22.30 AUD, inc GST
8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards
Brand: Adafruit
A Feather board without ambition is a Feather board without FeatherWings! This is the 8-Channel PWM or Servo? FeatherWing, you can add 8 x 12-bit PWM outputs to...
$19.80 AUD, inc GST
Adafruit 16-Channel 12-bit PWM/Servo Shield - I2C interface
Brand: Adafruit
You want to make a cool Arduino robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs...
$34.95 AUD, inc GST
Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit
Brand: Adafruit
The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive...
$34.95 AUD, inc GST
Pan-Tilt HAT For Raspberry Pi and Jetson Nano
Brand: DFRobot
This is a 2-DOF pan-tilt hat based on Raspberry Pi 40PIN GPIO. It can directly be used once plugged into the Pi board’s GPIO. Meanwhile, the board makes the Raspberry...
$34.40 AUD, inc GST
10A 6V-24V DC Raspberry Pi Motor Driver HAT
Brand: The Pi Hut
Looking for a high-current motor driver for your Raspberry Pi? How does dual 10A channels sound?! Cytron's latest motor driver is designed for the...
$63.60 AUD, inc GST
Grove Base Hat for Raspberry Pi
Brand: Seeed Studio
The Grove Base Hat for Raspberry Pi provides a Digital/Analog/I2C/PWM/UART port to meet all your needs.
$17.70 AUD, inc GST
IO Expansion HAT for Pi Zero/Zero W
Brand: DFRobot
This DFRobot IO Expansion HAT provides Digital, Analog, I2C, PWM, UART and SPI port to meet all your needs. It is pretty small and perfectly suitable for Raspberry...
$18.10 AUD, inc GST
Pimoroni Pan-Tilt HAT for Raspberry Pi - without pan-tilt module
Brand: Pimoroni
The Pan-Tilt HAT from Pimoroni lets you mount and control a pan-tilt module right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you independently...
$34.70 AUD, inc GST
Similar matches
Raspberry Pi 5 M.2 HAT+
Brand: Raspberry Pi
Connect M.2-format PCIe and NVMe devices to your Raspberry Pi 5 with the M.2 HAT.
$21.29 AUD, inc GST
Adafruit 16-Channel PWM / Servo Bonnet for Raspberry Pi
Brand: Adafruit
The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling Servo Motors - these motors need very specific and repetitive...
$23.45 AUD, inc GST
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Brand: Adafruit
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up...
$40.15 AUD, inc GST
Power Over Ethernet HAT (G) For Raspberry Pi 5 (5V, 5A)
Brand: Waveshare
The PoE HAT (G) is an IEEE 802.3af/at-compliant PoE (Power Over Ethernet) HAT for Raspberry Pi 5. By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
$26.40 AUD, inc GST
Power Over Ethernet HAT (F) For Raspberry Pi 5
Brand: Waveshare
Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard...
$35.30 AUD, inc GST
2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi
Brand: Waveshare
2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi, Dual Chips Solution, Stackable Design For Expanding Multiple CAN Channels, Built-In Multi...
$41.25 AUD, inc GST
UCTRONICS PoE+ HAT for Raspberry Pi 5 (5V 4.5A)
Brand: UCTRONICS
UCTRONICS PoE+ HAT for Raspberry Pi 5, Power over Ethernet with Active Cooling Fan, Aluminum Heatsink, Supports IEEE 802.3af/at Network Standard, 5V 4.5A...
$50.40 AUD, inc GST
2-Channel Isolated CAN Expansion HAT for Raspberry Pi, Dual Chips Solution
Brand: Waveshare
2-Channel Isolated CAN Bus Expansion HAT for Raspberry Pi, MCP2515 + SN65HVD230 Dual Chips Solution, Multi Onboard Protection Circuits...
$33.95 AUD, inc GST
Raspberry Pi 5 M.2 HAT+ (Compact)
Brand: Raspberry Pi
A small form-factor alternative of the full size M.2 HAT - perfect for fitting into the Official Pi 5 Case.
$26.64 AUD, inc GST
Power Over Ethernet HAT (H) For Raspberry Pi 5
Brand: Waveshare
Power Over Ethernet HAT (H) For Raspberry Pi 5 / CM 5, 5V 5A Output, stable performance, Supports 802.3af/at network standard, Isolated Switched-mode...
$39.00 AUD, inc GST
Sense HAT for Raspberry Pi Zero
Brand: Waveshare
Explore the Waveshare Sense HAT for Raspberry Pi Zero, featuring onboard environmental sensors and expandable I/O capabilities for your next DIY electronics project.
$34.95 AUD, inc GST
Power over Ethernet HAT (E) for Raspberry Pi 3B+/4B, 802.3af-compliant
Brand: Waveshare
Power over Ethernet HAT (E) for Raspberry Pi 3B+/4B, 802.3af-compliant...
$24.80 AUD, inc GST
Makerverse Nano Power Timer HAT for Raspberry Pi Pico
Brand: Makerverse
Periodically cycles power to your battery-powered projects
$12.75 AUD, inc GST
Power Management HAT for Raspberry Pi
Brand: Waveshare
Power Management HAT for Raspberry Pi, with Embedded Arduino MCU and RTC...
$37.30 AUD, inc GST
Pimoroni Automation HAT for Raspberry Pi
Brand: Pimoroni
Take control of and monitor your world with our ultimate jack-of-all-trades Raspberry Pi HAT!
$64.75 AUD, inc GST
RS485 Expansion HAT for Raspberry Pi - 2-Channel Isolated
Brand: Waveshare
This is a 2-channel isolated RS485 expansion HAT designed for Raspberry Pi, adopts the SC16IS752+SP3485 solution, with embedded protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc.
$31.85 AUD, inc GST
Kitronik Air Quality Control HAT for Raspberry Pi
Brand: Kitronik
Monitor, log, and react to gathered sensory data with the Kitronik Air Quality Control HAT for Raspberry Pi. This HAT provides a variety of sensor inputs...
$62.75 AUD, inc GST
Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit
Brand: Adafruit
You can now create a dazzling display with your Raspberry Pi Model A+/B+/Pi 2, 3, or 4 with the Adafruit RGB Matrix HAT. This HAT plugs into your Pi and makes it...
$48.15 AUD, inc GST
ESP32-S3-WROOM-1-N4 Module (PCB Antenna)
Brand: DFRobot
ESP32-S3-WROOM-1 is a powerful, generic Wi-Fi+ Bluetooth LE MCU module that is built around the ESP32-S3 series of SoCs...
$6.95 AUD, inc GST
Portenta HAT Carrier
Brand: Arduino
Prototype like a pro, add automation or raise the bar in robotics: Portenta Hat Carrier makes high performance easy for you.
$86.80 AUD, inc GST
M5Stack DAC2 Hat - Precision Analog Converter
Brand: M5Stack
Explore M5Stack's DAC2 Hat, a precision 15-bit digital-to-analog converter featuring dual 0-10V outputs, I2C communication, and short-circuit protection for StickC series controllers.
$21.55 AUD, inc GST
Maker Hat Base - HAT & GPIO Extension for Raspberry Pi 400
Brand: Pimoroni
Maker Hat Base extends out all the GPIOs of the Raspberry Pi 400 in a quick and simple way - be it using your favorite HAT or building your own simple...
$38.50 AUD, inc GST
UCTRONICS PoE HAT for Raspberry Pi 4B, IEEE 802.3af-Compliant, 5V 2.5A
Brand: UCTRONICS
UCTRONICS U6241 PoE HAT for Raspberry Pi is to use with the Raspberry Pi models with PoE pins like Raspberry Pi 3 Model B+ and Raspberry Pi 4 Model B
$41.50 AUD, inc GST
Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit - MPR121
Brand: Adafruit
This touch-able add on HAT for Raspberry Pi will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensing works by detecting...
$26.95 AUD, inc GST
Pimoroni Breakout Garden HAT (I2C + SPI)
Brand: Pimoroni
Now with SPI! Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to six Pimoroni breakouts (4xI2C, 2xSPI) into the slots on Breakout Garden and get started coding and creating.
$33.15 AUD, inc GST
Pimoroni Automation HAT Mini for Raspberry Pi Zero
Brand: Pimoroni
Automate your world with Automation HAT Mini! Monitor and control up to 24V systems and see their status on the gorgeous full-colour display.
$48.15 AUD, inc GST
SIM7028 NB-IoT HAT for Raspberry Pi
Brand: Waveshare
SIM7028 NB-IoT HAT for Raspberry Pi, Supports Global Band NB-IoT Communication, Small In Size And Low Power Consumption, onboard 40PIN GPIO header, comes...
$29.75 AUD, inc GST
M-Bus HAT for Raspberry Pi
Brand: The Pi Hut
With this M-Bus HAT, you can extend your Raspberry Pi with functions for smart metering! The HAT provides an M-Bus master to which other M-Bus devices...
$80.30 AUD, inc GST
dAISy HAT - AIS Receiver for the Raspberry Pi
Brand: The Pi Hut
The dAISy HAT is the perfect AIS receiver for your Raspberry Pi projects and embedded applications. This two-channel marine AIS receiver works great with...
$169.95 AUD, inc GST
ESP32-C3-WROOM-02-N4 Module (PCB antenna)
Brand: DFRobot
ESP32-C3-WROOM-02 is a universal Wi-Fi and low-power Bluetooth LE module. The rich set of peripherals and small size make the two modules an ideal choice...
$8.40 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.