Search results for: 'piicodev button'

50 results

PiicoDev Button

Brand: PiicoDev

An accessible, tactile interface adds control to your project.

$8.05 AUD, inc GST

PiicoDev Cable 100mm

Brand: PiicoDev
This 100mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.85 AUD, inc GST

PiicoDev LiPo Expansion Board for Raspberry Pi Pico

Brand: PiicoDev

The PiicoDev® LiPo Expansion Board for Raspberry Pi Pico is a great way to start experimenting with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.

$5.40 AUD, inc GST

PiicoDev Cable 50mm

Brand: PiicoDev
This 50mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.80 AUD, inc GST

PiicoDev Cable 200mm

Brand: PiicoDev
This 200mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.98 AUD, inc GST

PiicoDev Prototyping Cable (Male) 200mm

Brand: PiicoDev
This 200mm cable breaks out the four wires in a PiicoDev cable for manual wiring to breadboards or development boards. It's a 4-wire harness with an SH connector on one end and four Dupont-style connectors on the other.
$0.95 AUD, inc GST

PiicoDev Adapter for Breadboards

Brand: PiicoDev
The PiicoDev® Adapter for Breadboards allows you to break-out the 4-wires in a PiicoDev cable for prototyping on a breadboard.
$1.65 AUD, inc GST

PiicoDev Prototyping Cable (Female) 200mm

Brand: PiicoDev
This 200mm cable breaks out the four wires in a PiicoDev cable for manual wiring to breadboards or development boards. It's a 4-wire harness with an SH connector on one end and four Dupont-style connectors on the other.
$2.70 AUD, inc GST

PiicoDev Cable Expansion Kit

Brand: PiicoDev

Top up your PiicoDev Starter kit with a range of the most used cables!

$12.76 AUD, inc GST

PiicoDev Cable 500mm

Brand: PiicoDev
This 500mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$1.35 AUD, inc GST

PiicoDev Protoboard

Brand: PiicoDev

The perfect companion for prototyping with your own modules alongside the PiicoDev ecosystem.

$1.75 AUD, inc GST

PiicoDev Platform for Raspberry Pi Pico

Brand: PiicoDev
Connecting extra sensors and devices to the Raspberry Pi Pico is easier than ever with our Pioneers Platform For Raspberry Pi Pico!
$6.35 AUD, inc GST

PiicoDev Adapter for Raspberry Pi

Brand: PiicoDev
The PiicoDev® Adapter for Raspberry Pi is a great way to connect sensors to your Raspberry Pi without soldering.
$4.05 AUD, inc GST

PiicoDev Splitter

Brand: PiicoDev

Split one PiicoDev Cable in three directions, or break out for soldered connections

$3.50 AUD, inc GST

PiicoDev Expansion Board for Pico (Non-Recharging)

Brand: PiicoDev

Start experimenting with high-tech sensors and modules with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.

$5.90 AUD, inc GST

PiicoDev Starter Kit for Raspberry Pi Pico

Brand: PiicoDev
Get started coding high-tech sensors and modules with the PiicoDev® Starter Kit - BYO Pico
$86.50 AUD, inc GST

PiicoDev Platform for Micro:bit

Brand: PiicoDev
Connecting extra sensors and devices to the Micro:bit is easier than ever with our PiicoDev® Platform For Micro:bit!
$6.20 AUD, inc GST

PiicoDev Adapter for Micro:bit

Brand: PiicoDev
Connect your Micro:bit with the outside world using PiicoDev® Adapter for Micro:bit. With this adapter you can experiment with sensors from the PiicoDev range giving your Micro:bit new sensing abilities.
$13.20 AUD, inc GST

PiicoDev Platform for Raspberry Pi

Brand: PiicoDev
Our PiicoDev® Platform For Raspberry Pi is perfect for rapid prototyping projects with Raspberry Pi Boards and hardware
$5.95 AUD, inc GST

PiicoDev Starter Kit for Micro:bit

Brand: PiicoDev
Get started coding high-tech sensors and modules with the PiicoDev® Starter Kit - BYO Micro:bit v2
$94.15 AUD, inc GST

PiicoDev Capacitive Touch Sensor

Brand: PiicoDev
Add user control to your project with three touch pad inputs.
$7.35 AUD, inc GST

PiicoDev Starter Kit for Raspberry Pi

Brand: PiicoDev
Get started coding high-tech sensors and modules with the PiicoDev® Starter Kit - BYO Raspberry Pi.
$84.75 AUD, inc GST

PiicoDev 3 Module Platform

Brand: PiicoDev

Our 3 Module PiicoDev®  Platform is perfect for hand-held and prototyping.

$4.80 AUD, inc GST

PiicoDev Mount for Raspberry Pi and goBILDA

Brand: PiicoDev

Mount your Raspberry Pi and a couple of PiicoDev modules to your goBILDA creations!

$4.32 AUD, inc GST

PiicoDev Mount for Pico and goBILDA

Brand: PiicoDev

Mount your PiicoDev Adapter for Pico and a couple of PiicoDev modules to your goBILDA creations!

$4.32 AUD, inc GST

Arduino Modulino Buttons

Brand: Arduino
Three push buttons (plus three orange LEDs) for interactive projects, menu navigation or quick control inputs.
$15.20 AUD, inc GST

Single PiicoDev Module Mount for goBILDA

Brand: PiicoDev

Mount a PiicoDev module to your goBILDA creations!

$1.55 AUD, inc GST

SparkFun Qwiic Keypad - 12 Button

Brand: Sparkfun
Keypads are very handy input devices, but who wants to tie up seven GPIO pins, wire up a handful of pull-up resistors, and write firmware that wastes valuable processing...
$22.95 AUD, inc GST

SparkFun Qwiic Button - Red LED

Brand: Sparkfun
Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The...
$10.05 AUD, inc GST

Double PiicoDev Module Mount for goBILDA

Brand: PiicoDev

Mount a couple of PiicoDev modules to your goBILDA creations!

$1.82 AUD, inc GST

SparkFun Qwiic Button - Green LED

Brand: Sparkfun
Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The...
$10.05 AUD, inc GST

PiicoDev Mount for micro:bit and goBILDA

Brand: PiicoDev

Mount your PiicoDev Adapter for micro:Bit and a couple of PiicoDev modules to your goBILDA creations!

$4.32 AUD, inc GST

SparkFun Qwiic Button Breakout

Brand: Sparkfun
Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The...
$7.80 AUD, inc GST
Similar matches

PiicoDev RFID Module (NFC 13.56MHz)

Brand: PiicoDev
Read (and write) RFID/NFC tags with this compact module.
$11.45 AUD, inc GST

PiicoDev Servo Driver (4 Channel)

Brand: PiicoDev

Motion means exciting. Control up to 4 servos independently!

$14.65 AUD, inc GST

PiicoDev 3x RGB LED Module

Brand: PiicoDev
Add dazzle to your project with three individually controllable RGB LEDs.
$6.50 AUD, inc GST

Makerverse Nano Power Timer HAT for Raspberry Pi Pico

Brand: Makerverse

Periodically cycles power to your battery-powered projects

$12.75 AUD, inc GST

PiicoDev Pressure Sensor MS5637

Brand: PiicoDev
Measure barometric pressure or infer altitude-change from air pressure.
$10.90 AUD, inc GST

Arcade Button with LED - 30mm Translucent Red

Brand: Adafruit
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right...
$5.95 AUD, inc GST

PiicoDev Ultrasonic Rangefinder

Brand: PiicoDev

Use echolocation to measure distance

$9.55 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.