Search results for: &#039;microsd card module for spi&#039;

This is a Micro SD card module from DFRobot. The SD Card Module has various applications such as data logging, audio, video, graphics. This module will greatly expand the capbility of an Arduino!

$8.70 AUD, inc GST

This simple board breaks out the pins of a microSD card connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1" connectors.

Breakout Board for microSD Card

Brand: Pololu

$8.30 AUD, inc GST

MicroSD card breakout board+

Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides 150mA for power-hungry cards...

$13.20 AUD, inc GST

Adafruit microSD Card BFF Add-On for QT Py and Xiao

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of...

$5.50 AUD, inc GST

Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested.

Breakout Board for microSD Transflash

Brand: Sparkfun

$9.90 AUD, inc GST

The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level shifting hardware, this board allows you to utilize a microSD card at Arduino’s SD library’s top speed on a 5V system. With this small breakout board, that is not much bigger than your fingernail, adding mass storage to your project will never be easier.

SparkFun Level Shifting microSD Breakout

Brand: Sparkfun

$10.85 AUD, inc GST

This compact board breaks out the pins of a microSD card connector necessary to interface with the card through SPI (Serial Peripheral Interface), and it...

Breakout Board for microSD Card with 3.3V Regulator and Level Shifters

Brand: Pololu

$12.60 AUD, inc GST

Add an SD slot and prototyping area in a single shield

Arduino SD Proto Shield

Brand: Arduino

$33.70 AUD, inc GST

Out of stock

Adafruit SPI Flash SD Card - XTSD 4 GB

This breakout is for a fascinating chip - it looks like an SPI Flash storage chip (like the GD25Q16) but its really an SD card, in an SMT chip format....

$24.15 AUD, inc GST

Out of stock

This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino's built-in SD library...

SD Card Shield V4 (Seeed Studio)

Brand: Seeed Studio

$28.60 AUD, inc GST

The Ethernet Shield for Arduino is based on the Wiznet W5100 and connects your Arduino-compatible board to the internet a few minutes. Simply plug this module onto board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet.

W5100 Ethernet + SD Card Shield (Arduino Compatible)

Brand: Core Electronics

$9.15 AUD, inc GST

2.0 320x240 IPS TFT LCD Display with MicroSD Card Breakout (Non-Touch)

This 2.0” LCD display adopts ST7789V driver chip and has 320*240 color pixels (RGB565), performing excellently in the angle of view (80/80/80/80). It supports SPI(4-wire)...

$28.70 AUD, inc GST

Micro SD Card Extender - 68cm (26 inch) long cable

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with a Micro SD Card Extender . This simple, but effective device...

$13.90 AUD, inc GST

Fermion: 1.8" 128x160 IPS TFT LCD Display with MicroSD Card Slot (Breakout)

This ST7735S 1.8" TFT Display features a resolution of 128×160 and SPI (4-wire) communication. Integrated with an SD card slot, it allows to easily read...

$14.15 AUD, inc GST

Fermion: 2.8” 320x240 TFT LCD Resistive Touchscreen with MicroSD Card Slot (Breakout)

With 320x240 color pixels, this 2.8” LCD display module adopts the ILI9341 driver chip and integrates XPT2046 that supports resistive touch.

$42.10 AUD, inc GST

Adafruit SPI Flash SD Card - XTSD 512 MB

This breakout is for a fascinating chip - it looks like an SPI Flash storage chip (like the GD25Q16) but its really an SD card, in an SMT chip format. What that means is that you wire up like an SD card breakout, and use the SD card libraries you already have for your microcontroller. For example, you can use the built in SD library in Arduino, or for CircuitPython Adafruit have an sdcard library. The breakout will act just like a 512 MB sized card with FAT formatting (it's pre-formatted).

$17.40 AUD, inc GST

4 Pack MicroSD Exteneders

Brand: Arducam

Extend your uSD slot on your Raspberry Pi or 3D printer.

$25.10 AUD, inc GST

Adafruit 1.44 Color TFT LCD Display with MicroSD Card breakout - ST7735R

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate...

$29.95 AUD, inc GST

SD Card Extender - 68cm (26 inch) long cable

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with an SD Card Extender . This simple, but effective device gives...

$15.10 AUD, inc GST

Adafruit SPI Flash SD Card - XTSD 2 GB

This breakout is for a fascinating chip - it looks like an SPI Flash storage chip (like the GD25Q16) but its really an SD card, in an SMT chip format....

$18.90 AUD, inc GST

Out of stock

MicroSD Socket

Add tons of storage to your next project with this micro SD card socket. Adafruit use this part in all Adafruit's designs and it works great with any microSD ('transflash') of...

$3.45 AUD, inc GST

This MicroSD card adapter makes your pi more slimmer. It’s easily to slide in to the Raspberry Pi B, and just is half length than normal SD card. Also...

MicroSD Card Adapter for Raspberry Pi B (Seeed Studio)

Brand: Seeed Studio

$9.20 AUD, inc GST

1.54 240x240 IPS TFT LCD Display with MicroSD Card Breakout

This display module features high resolution, low power consumption, wide-angle and easy wiring. With a small size of 1.54”, it offers 240x240 resolution. The module...

$26.20 AUD, inc GST

Micro SD Card PCB Extender

Stop fiddling with micro SD card sockets in the back of your latest gadget during development, and give yourself a little more elbow room with this Small Micro SD...

$7.80 AUD, inc GST

microSD Sniffer

Brand: Sparkfun

When playing with microSD, you sometimes need to view what the SPI traffic is doing, whether for hacking or debugging. The microSD Sniffer allows you to hook up an external device, such as a logic analyzer or microcontroller, to view what signals are being passed back and forth. Insert one side into a regular uSD socket and a uSD card into the on-board socket, simple as that.

$22.95 AUD, inc GST