Search results for: 'lithium polymer battery protection board'
Adafruit BQ25185 USB / DC / Solar Lithium Ion/Polymer charger
Brand: Adafruit
Coming sooon!We're always on the look out for better ways to make projects portable: being able to charge your battery in the most convenient manner...
$13.10 AUD, inc GST
Adafruit Universal USB / DC / Solar Lithium Ion/Polymer charger - bq24074
Brand: Adafruit
This charger is the only one you need to keep all your Lithium Polymer (LiPoly) or Lithium Ion (LiIon) rechargeable batteries topped up. No matter the power source at your disposal!
$28.25 AUD, inc GST
WisBlock USB LiPo Solar Power Slot Module RAK19012
Brand: RAKwireless
Modular power board offers USB-C, battery and solar charging to flash and test firmware in WisBlock projects.
$11.50 AUD, inc GST
M5Stack Battery Module for ESP32 Core Development Kit
Brand: M5Stack
The Battery extension module is a 750mAh battery ADD-ON.
$15.65 AUD, inc GST
Similar matches
Polymer Lithium Ion Battery (LiPo) 3.7V 1100mAh
Brand: Core Electronics
Rely on the superior chemistry and energy density of Lithium Ion batteries for your next portable project. This battery has a capacity of 1100mAh and connects to your circuit by the attached JST connector.
$8.65 AUD, inc GST
LiPo Safety Battery Bag (18x23cm)
Brand: Core Electronics
Keep your batteries in a safer place with this LiPo bag
$7.35 AUD, inc GST
Polymer Lithium Ion Battery (LiPo) 3.7V 400mAh
Brand: Core Electronics
Polymer Lithium Ion batteries offer superior energy density with this 400mAh battery being only 6mm in height!
$5.55 AUD, inc GST
Polymer Lithium Ion Battery (LiPo) 3.7V 2400mAh
Brand: Core Electronics
Welcome to the awesomeness that is LiPo batteries. Polymer Lithium Ion batteries offer superior energy density with this 2400mAh battery being on 6mm in height!
$16.95 AUD, inc GST
Polymer Lithium Ion Battery, 18650 Cell (3.7V 2600mAh)
Brand: Core Electronics
No, these aren’t some sort of weird, blue AA battery, this is actually a 18650 Lithium Ion Cell. These round high capacity cells have been mainly used in flashlight type applications but with its capability to be used as a drop-in rechargable cell at 3.7V with a capacity of 2600mAh. This is a great battery option for those of you who need a simple to install and replace cell with a lot of juice.
$11.45 AUD, inc GST
Polymer Lithium Ion Battery (LiPo) 3.7V 2000mAh
Brand: Core Electronics
Welcome to the awesomeness that is LiPo batteries. Polymer Lithium Ion batteries offer superior energy density with this 2000mAh battery being on 5.8mm in height!
$14.45 AUD, inc GST
Polymer Lithium Ion Battery (LiPo) 3.7V 120mAh
Brand: Core Electronics
Welcome to the awesomeness that is LiPo batteries. Polymer Lithium Ion batteries offer superior energy density with this 120mAh battery being only 5mm in height!
$5.65 AUD, inc GST
Polymer Lithium Ion Battery (LiPo) 3.7V 6000mAh
Brand: Core Electronics
This Lithium Polymer Ion based battery is a slim, lightweight battery that is perfect for a portable project! LIPO chemistry is the highest energy density chemistry around and due to that, you get nominal 3.7V at 6000mAh!
$40.45 AUD, inc GST
Polymer Lithium Ion Battery (LiPo) 3.7V 4400mAh
Brand: Core Electronics
This Lithium Polymer Ion based battery is a slim, lightweight battery that is perfect for a portable project! LIPO chemistry is the highest energy density chemistry around and due to that, you get nominal 3.7V at 4400mAh!
$28.50 AUD, inc GST
3-pin LiPo Battery 1000mAh
Brand: Core Electronics
1000mAh Lithium-Ion battery with an inboard NTC.
$8.50 AUD, inc GST
LiPo Safety Battery Bag (23x30cm)
Brand: Core Electronics
Keep your batteries in a safer place with this LiPo bag
$7.05 AUD, inc GST
4x AA Battery box (JST-PH, Switch)
Brand: Core Electronics
Conveniently power your projects with this sleek, quality battery box!
$2.80 AUD, inc GST
3x AA Battery box (JST-PH, Switch)
Brand: Core Electronics
Conveniently power your projects with this sleek, quality battery box!
$1.80 AUD, inc GST
2x AA Battery box (JST-PH, Switch)
Brand: Core Electronics
Conveniently power your projects with this sleek, quality battery box!
$1.60 AUD, inc GST
2-Way 18650 Battery Holder
This easy-to-use 16850 battery holder with dual-slot offers micro and type-C charging inputs, five 5V/2A output ports, five 3.3V/1A output ports and one...
$20.80 AUD, inc GST
MP2636 Power Booster & Charger Module
Brand: DFRobot
In many applications, we will use lithium batteries as our power solutions. In this kind of application, the most two important things are the power boost and battery...
$13.55 AUD, inc GST
Polymer Lithium Ion Battery (LiPo) 18650 Cell (3.7V 2600mAh, Solder Tab)
Brand: Core Electronics
This is the same 18650 Lithium Ion Cell that you know and love, but now includes pre-attached solder tabs! These round high capacity cells have been mainly used in flashlight type applications but with its capability to be used as a drop-in rechargable cell at 3.7V with a capacity of 2600mAh. This battery has been made even better with the attached solder tabs. You now have a much wider range of applications to drop this battery into while still remaining simple to install!
$12.15 AUD, inc GST
Li-polymer Battery HAT, 5V Output, Quick Charge
Brand: Waveshare
Delivers 5V from a 3.7V Li-polymer pack to a Raspberry Pi with bi-directional quick charge, and includes protection and capacity LEDs for safe DIY use.
$31.95 AUD, inc GST
Lithium Battery Charger
Brand: DFRobot
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500mA per hour.
$20.05 AUD, inc GST
3-pin LiPo Battery 6000mAh
Brand: Core Electronics
6000mAh Lithium-Ion battery with an inboard NTC.
$37.30 AUD, inc GST
4-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for four AA cells arranged as two back-to-back two-cell holders.
$5.20 AUD, inc GST
SparkFun LiPo Charger/Booster - 5V/1A
Brand: Sparkfun
The SparkFun 5V/1A LiPo Charger/Booster is a no-nonsense circuit for generating one amp from a Lithium Polymer battery at 5V. This LiPo charger is a very economical...
$33.30 AUD, inc GST
3-pin LiPo Battery 10000mAh
Brand: Core Electronics
10000mAh Lithium-Ion battery with an inboard NTC.
$63.40 AUD, inc GST
Battery Tray (4 Cell, Square Pack, 2-Pos TJC8 Power Connector [MH-FC])
Brand: goBilda
This 4 cell AA battery tray is great for powering low current consumption items that require 6V. The 2 position TJC8 connector is.....
$6.65 AUD, inc GST
CR123A Li-ion Battery Holder(V1.0)
Brand: DFRobot
This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to...
$10.40 AUD, inc GST
2-AAA Battery Holder
Brand: Pololu
Battery holder for two AAA cells.
$2.80 AUD, inc GST
4×AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)
Brand: DFRobot
This battery holder can hold 4 AA batteries and comes with a DC 2.1 jack that offers a simpler and more secure wire connection...
$3.90 AUD, inc GST
2-C Battery Holder
Brand: Pololu
Battery holder for two C cells.
$8.70 AUD, inc GST
2-AA Battery Holder
Brand: Pololu
Battery holder for two AA cells.
$5.20 AUD, inc GST
Single Li-Ion and LiPoly Battery Power Meter
This small, palm-sized battery power meter has a small display that shows off how much juice is left in your single Lithium Ion/Polymer rechargeable...
$6.40 AUD, inc GST
USB / DC / Solar Lithium Ion/Polymer charger - v2
Brand: Adafruit
NOTE: This product is only designed for use with solar panels sold at the Adafruit store. Adafruit cannot guarantee this will work with solar panels purchased elsewhere...
$34.90 AUD, inc GST
4-AA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for four AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$12.70 AUD, inc GST
3-C Battery Holder
Brand: Pololu
Battery holder for three C cells.
$11.10 AUD, inc GST
Pololu Reverse Voltage Protector, 4-60V, 20A
Brand: Pololu
This module protects a connected load from reverse voltages down to -60 V. This version does not block reverse current, making it suitable for...
$9.95 AUD, inc GST
6-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for six AA cells arranged as two back-to-back three-cell holders.
$9.65 AUD, inc GST
6xAA Battery Holder(double layer)
Brand: DFRobot
This battery holder can hold 6 AA battery which can make 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells.
$2.15 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.