Search results for: 'jst ph female'
JST PH 2.0mm Pitch Connector Kit - 220 Piece Kit
Brand: Adafruit
Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...
$23.80 AUD, inc GST
JST-PH 2 Pin Female Connector
Brand: DFRobot
This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units).
$1.20 AUD, inc GST
JST-PH 2-Pin SMD Connector (Side Entry)
Add a power connector to your SMD PCB designs with this JST-PH 2-pin compatible connector...
$0.26 AUD, inc GST
JST 4 Holes Female Connector
Brand: DFRobot
This product includes 4-pin 2.0mm mating connector housing(10 units) and crimp pins (40 units).
$2.20 AUD, inc GST
JST PH 3-pin Vertical Connector (10-pack) - STEMMA
Brand: Adafruit
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 3 pin. These...
$6.70 AUD, inc GST
Pimoroni HyperPixel 4.0 I2C Cable (JST-PH to male DuPont)
Brand: Pimoroni
A handy little cable that connects to the JST connector on the underside of HyperPixel 4.0, allowing you to use I2C devices with your Raspberry Pi at the same time as the display.
$4.80 AUD, inc GST
JST PH 2-Pin Cable – Male Header 200mm
Brand: Adafruit
For a really long time Adafruit assumed that the JST PH didn't have a free-hanging male header version. But then Adafruit found this JST-PH 2-pin Male Cable, and Adafruit were like...
$1.60 AUD, inc GST
2-Pin Female JST PH-Style Cable (14cm)
Brand: Pololu
This 5.5" (14cm) cable has two 26AWG conductors with a 2mm-pitch 2-pin female JST PH-style connector. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
$3.20 AUD, inc GST
JST PH to Breadboard Jumper (3-pin)
Brand: Sparkfun
This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins.
$2.95 AUD, inc GST
JST PH-Style Cable, 2-Pin, Female-Female, 25cm
Brand: Pololu
This 2-conductor, 25 cm (10") cable has 24 AWG wires and 2-pin female JST PH-type connectors (2mm pitch) on both ends...
$2.80 AUD, inc GST
JST 2-pin cable
Brand: Adafruit
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with Adafruit's Lipoly charger! Adafruit don't have the 'mating' version...
$1.30 AUD, inc GST
JST PH 3-Pin Plug to Male Header Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
$2.60 AUD, inc GST
JST 2-pin Extension Cable with On/Off Switch - JST PH2
Brand: Adafruit
By popular request - Adafruit now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable...
$6.35 AUD, inc GST
3-Pin Female JST PH-Style Cable for Sharp Distance Sensors (30cm)
Brand: Pololu
This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
$3.25 AUD, inc GST
JST PH 4-pin Vertical Connector (10-pack) - STEMMA
Brand: Adafruit
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 4 pin. These...
$6.65 AUD, inc GST
JST PH-Style Cable with Female Pins for 0.1" Housings, 2-Pin, 12cm
Brand: Pololu
This 2-conductor, 12 cm (4.5") cable has 24 AWG wires and a 2-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$2.40 AUD, inc GST
JST PH-Style Cable with Female Pins for 0.1" Housings, 4-Pin, 12cm
Brand: Pololu
This 4-conductor, 12 cm (4.5") cable has 24 AWG wires and a 4-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$3.75 AUD, inc GST
JST PH-Style Cable with Female Pins for 0.1" Housings, 6-Pin, 75cm
Brand: Pololu
This 6-conductor, 75 cm (30") cable has 24 AWG wires and a 6-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$11.35 AUD, inc GST
STEMMA Cable - 150mm 4 Pin JST-PH Cable–Female/Female
Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-PH female 4-pin connectors on each end. These types of JST cables are commonly found on small...
$1.70 AUD, inc GST
Breakout for JST PH-Style Connector, 2-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 2-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.50 AUD, inc GST
Breakout for JST PH-Style Connector, 4-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 4-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.80 AUD, inc GST
JST PH-Style Cable with Female Pins for 0.1" Housings, 3-Pin, 75cm
Brand: Pololu
This 3-conductor, 75 cm (30") cable has 24 AWG wires and a 3-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$6.30 AUD, inc GST
JST PH-Style Cable with Female Pins for 0.1" Housings, 5-Pin, 30cm
Brand: Pololu
This 5-conductor, 30 cm (12") cable has 24 AWG wires and a 5-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$5.90 AUD, inc GST
3-Pin Female JST PH-Style Cable (30 cm) with Male Pins for 0.1" Housings
Brand: Pololu
This 12-inch (30-cm) cable has 26 AWG wires with a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with male pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
$4.95 AUD, inc GST
3-Pin Female JST PH-Style Cable (30 cm) with Female Pins for 0.1" Housings
Brand: Pololu
This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with female pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
$4.95 AUD, inc GST
JST PH-Style Cable, 4-Pin, Female-Female, 63cm
Brand: Pololu
This 4-conductor, 63 cm (25") cable has 24 AWG wires and 4-pin female JST PH-type connectors (2mm pitch) on both ends...
$7.10 AUD, inc GST
Breakout for JST PH-Style Connector, 3-Pin Male Side-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 3-pin, side-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.70 AUD, inc GST
JST PH 3-pin Horizontal Connector (10-pack) - STEMMA
Brand: Adafruit
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 3 pin. These...
$6.60 AUD, inc GST
JST-PH 2-Pin SMT Right Angle Connector
Brand: Adafruit
A simple 2-pin connector that is compatible with the "JST PH 2-pin" connector - perfect for soldering to the bottom of Adafruit's 3.3V Logic Trinket and 5V Logic Trinket!...
$1.45 AUD, inc GST
Similar matches
PiicoDev LiPo Expansion Board for Raspberry Pi Pico
Brand: PiicoDev
The PiicoDev® LiPo Expansion Board for Raspberry Pi Pico is a great way to start experimenting with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.
$5.40 AUD, inc GST
4-pin JST PH to JST SH Cable - STEMMA to QT / Qwiic - 200mm long
Brand: Adafruit
Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one...
$1.95 AUD, inc GST
PiicoDev Expansion Board for Pico (Non-Recharging)
Brand: PiicoDev
Start experimenting with high-tech sensors and modules with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.
$5.90 AUD, inc GST
JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. Adafruit are carrying these to match up...
$3.20 AUD, inc GST
JST PH Cable (4-Pos JST PH, MH-FC to MH-FC, 600mm Length)
Brand: goBilda
This 600mm length 4-Pos JST cable has female connectors at both ends for conveying data between electronics in your project. It is the same.....
$5.30 AUD, inc GST
2-Pin Female JST XH-Style Cable (15cm)
Brand: Pololu
This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
$3.30 AUD, inc GST
JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
$3.30 AUD, inc GST
2.0mm Pitch 4-pin Cable Matching Pair - JST PH Compatible
Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.10 AUD, inc GST
JST PH 3-Pin Plug to Female Socket Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" female header sockets on the end. Adafruit are carrying these to match...
$2.70 AUD, inc GST
6-Pin Female-Female JST SH-Style Cable 10cm
Brand: Pololu
This 10 cm (4") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$5.60 AUD, inc GST
6-Pin Single-Ended Female JST SH-Style Cable 12cm
Brand: Pololu
This 12 cm (4.5") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...
$3.50 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.