JST PH 2.0mm Pitch Connector Kit - 220 Piece Kit

Rating:
100% of 100
SKU: ADA4422 Brand: Adafruit
Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...
$25.35 AUD, inc GST
$23.05 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Fri, 19th of Apr

Quantity Discounts:

  • 10-25 $22.13 (exc GST)
  • 25+ $21.44 (exc GST)
- +

3 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • $10+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on end!

These connectors are really common in electronics, Adafruit use the 2 pin ones for Adafruit's batteries and battery packs. The 3 pin and 4 pin are used for STEMMA connectors. The 4 pin size is even compatible with Grove! They are large enough you can crimp without too much difficulty, but not as chunky as 0.1" / 2.5mm JST XH

Adafruit recommend you own a set of crimping pliers as well, such as these nice ones from Engineer - they're easier to use than trying to crimp with pliers.

Set contains the following parts in a nice reusable storage container:

  • 10 x 2-pin female connector 
  • 10 x 3-pin female connector
  • 10 x 4-pin female connector
  • 10 x 5-pin female connector
  • 10 x 6-pin female connector
  • 10 x 8-pin female connector
  • 10 x 2-pin male connector
  • 10 x 3-pin male connector
  • 10 x 4-pin male connector
  • 10 x 5-pin male connector
  • 10 x 6-pin male connector
  • 10 x 8-pin male connector
  • 100 x crimp female sockets

For more information about JST PH connectors, visit the JST website

This product is listed in:

Connectors & Sockets>JST Connectors

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

How to use Raspberry Pi Cameras with Bullseye OS Update

With the newest update to Raspberry Pi OS (Debian Version 11 - nicknamed ‘Bullseye’) t...
With the newest update to Raspberry Pi OS (Debian Version 11 - nicknamed ‘Bullseye’) t...

Face and Movement Tracking Pan-Tilt System with Raspberry Pi and OpenCV

[Update – Until there is correct compatibility of OPEN-CV with the new Raspberry ...
[Update – Until there is correct compatibility of OPEN-CV with the new Raspberry ...

Pan-Tilt Hat with Raspberry Pi - Quick Start Guide

Pimironi Picade Pan-Tilt Hat lets you mount and control a pan-tilt module right on top of your ...
Pimironi Picade Pan-Tilt Hat lets you mount and control a pan-tilt module right on top of your ...

Cameras Compared for Raspberry Pi

There are so many types of cameras modules and lenses that are plug-and-play for Raspberry Pi S...
There are so many types of cameras modules and lenses that are plug-and-play for Raspberry Pi S...

Projects

How to use Raspberry Pi Cameras with Bullseye OS Update

With the newest update to Raspberry Pi OS (Debian Version 11 - nicknamed ‘Bullseye’) t...
With the newest update to Raspberry Pi OS (Debian Version 11 - nicknamed ‘Bullseye’) t...

Face and Movement Tracking Pan-Tilt System with Raspberry Pi and OpenCV

[Update – Until there is correct compatibility of OPEN-CV with the new Raspberry ...
[Update – Until there is correct compatibility of OPEN-CV with the new Raspberry ...

Cameras Compared for Raspberry Pi

There are so many types of cameras modules and lenses that are plug-and-play for Raspberry Pi S...
There are so many types of cameras modules and lenses that are plug-and-play for Raspberry Pi S...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.