Search results for: &#039;jst ph connector&#039;

2.0mm Pitch 4-pin Cable Matching Pair - JST PH Compatible

These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.

$2.10 AUD, inc GST

2.0mm Pitch 5-pin Cable Matching Pair - JST PH Compatible

These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.

$2.25 AUD, inc GST

This 600mm Length JST adaptor is able to plug into the encoder found on 5000 Series Motors and 52xx Series Gear Motors, using the JST XH.....

4-Pos JST PH [MH-FC] to 4-Pos JST XH [MH-FC] Adaptor (600mm Length)

Brand: goBilda

$4.95 AUD, inc GST

2.0mm Pitch 3-pin Cable Matching Pair - JST PH Compatible

These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.

$2.20 AUD, inc GST

JST-PH 2-Pin SMT Right Angle Breakout Board

A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all Adafruit's 1-cell...

$3.20 AUD, inc GST

JST PH 3-Pin Plug to Female Socket Cable - 200mm

This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" female header sockets on the end. Adafruit are carrying these to match...

$2.70 AUD, inc GST

This product includes 3-pin 2.0mm mating connector housing(10 units) and crimp pins (30 units).

JST-PH 3 Holes Female Connector

Brand: DFRobot

$1.25 AUD, inc GST

JST PH-Style Cable, 6-Pin, Female-Female, 10cm

This 6-conductor, 10 cm (4") cable has 24 AWG wires and 6-pin female JST PH-type connectors (2mm pitch) on both ends...

$5.40 AUD, inc GST

2.0mm Pitch 6-pin Cable Matching Pair - JST PH Compatible

These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.

$2.35 AUD, inc GST

JST PH 3-pin Plug-Plug Cable - 100mm long

This cable is a little over 100mm / 4" long and fitted with JST-PH 3-pin connectors on either end. Adafruit dig the solid and compact nature of these connectors and the .. read more

$1.60 AUD, inc GST

JST PH 3-Pin Socket to Color Coded Cable - 200mm

This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. These are great to match up with Adafruit's JST 3-PH cables, for extending and...

$2.15 AUD, inc GST

3-Pin Female JST PH-Style Cable for Sharp Distance Sensors (30cm)

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.

$3.25 AUD, inc GST

Barrel Jack to 2-pin JST PH 2mm

Brand: Sparkfun

Two pin JST PH 2mm connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors used for battery charging were too large or were not capable of through-putting the current we wanted for faster charging. This setup, with a SMD JST connector and wall power supply, can handle up to 2A!

$6.10 AUD, inc GST

JST PH 4-pin Vertical Connector (10-pack) - STEMMA

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 4 pin. These...

$6.65 AUD, inc GST

JST PH-Style Cable with Female Pins for 0.1" Housings, 4-Pin, 12cm

This 4-conductor, 12 cm (4.5") cable has 24 AWG wires and a 4-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

$3.75 AUD, inc GST

JST PH-Style Cable, 4-Pin, Female-Female, 63cm

This 4-conductor, 63 cm (25") cable has 24 AWG wires and 4-pin female JST PH-type connectors (2mm pitch) on both ends...

$7.10 AUD, inc GST

JST PH-Style Cable with Female Pins for 0.1" Housings, 6-Pin, 75cm

This 6-conductor, 75 cm (30") cable has 24 AWG wires and a 6-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

$11.35 AUD, inc GST

This 300mm length adaptor brings versatility to your wiring toolbox by allowing you to transfer signal and power between a TJC8 connector.....

3-Pos TJC8 [MH-FC] to 3-Pos JST PH [MH-FC] Adaptor (300mm Length)

Brand: goBilda

$5.05 AUD, inc GST

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.

JST-PH Jumper 4 Wire Assembly

Brand: Sparkfun

$3.50 AUD, inc GST

JST-PH Jumper 3 Wire Assembly

Brand: Sparkfun

This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST-PH connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.

$3.30 AUD, inc GST