Search results for: 'gas pressure sensor'

50 results

BMP280 Digital Pressure Sensor Module(V1.0)

Brand: DFRobot
This is a breakout version of BMP280 Barometric Pressure Sensor from DFRobot with temperature and pressure measurement functions, supporting Arduino code control...
$9.60 AUD, inc GST

Fermion: BME688 AI Environmental Sensor (VOC, Temperature, Humidity, Pressure)

Brand: DFRobot
BME688 sensor detects VOCs, temp, humidity, pressure. Supports Arduino/IoT via I2C/SPI. AI gas analysis for air quality & smart homes...
$24.49 AUD, inc GST

Adafruit BME688 - Temperature, Humidity, Pressure and Gas Sensor - STEMMA QT

Brand: Adafruit
The long-awaited BME688 from Bosch gives you all the environmental sensing you want in one small package. This little sensor contains temperature, humidity, barometric pressure, and VOC gas sensing capabilities. All over SPI or I2C at a great price!
$34.05 AUD, inc GST

PiicoDev Pressure Sensor MS5637

Brand: PiicoDev
Measure barometric pressure or infer altitude-change from air pressure.
$10.90 AUD, inc GST

BME690 4-in-1 Air Quality Breakout (Gas, Temperature, Pressure, Humidity)

Brand: Pimoroni
This super-smart Bosch sensor measures temperature, pressure and humidity precisely. It also has an AI-enhanced gas scanner function....
$39.95 AUD, inc GST

BMP388 Digital Pressure Sensor Module

Brand: DFRobot
This is a newly-introduced Breakout version of BMP388 Sensor from DFRobot with pressure and temperature measurement. It supports Arduino code control, and the BMP388...
$11.47 AUD, inc GST

Differential Pressure Sensor (±500pa)

Brand: DFRobot
This high-resolution differential pressure sensor with I2C communication is used to measure the difference in pressure across two points on a device. A high-performance...
$64.99 AUD, inc GST

Gravity: BME688 AI Environmental Sensor (VOC, Temperature, Humidity, Pressure)

Brand: DFRobot
Gravity BME688 Environmental Sensor is a compact MEMS sensor that provides accurate measurements of temperature, humidity, barometric pressure, and VOC,...
$34.79 AUD, inc GST

Pimoroni BME688 4-in-1 Air Quality Breakout (Gas, Temperature, Pressure, Humidity)

Brand: Pimoroni
The super-smart BME688 air quality sensor can measure temperature, pressure and humidity precisely. It also has an upgraded, AI-enhanced gas scanner!
$38.05 AUD, inc GST

Grove - Temperature, Humidity, Pressure and Gas Sensor for Arduino - BME680

Brand: Seeed Studio
The Grove-Temperature&Humidity&Pressure&Gas Sensor(BME680) is not just a simple Arduino temperature sensor or barometer sensor but is a multiple function sensor that can measure temperature, pressure, humidity, and gas at the same time.
$37.20 AUD, inc GST

Adafruit BME680 - Temperature, Humidity, Pressure and Gas Sensor - STEMMA QT

Brand: Adafruit
The long awaited BME680 from Bosch gives you all the environmental sensing you want in one small package. This little sensor contains temperature, humidity, barometric...
$36.20 AUD, inc GST

Gravity BMP388 Barometric Pressure Sensors

Brand: DFRobot
This new released BMP388 barometric pressure sensor by DFRobot is equipped with the functionality of temperature and pressure measurement. It supports Arduino code...
$11.52 AUD, inc GST

Gravity: Air Pressure Sensor (15-700kPa) - I2C - MPX5700AP

Brand: DFRobot
Gravity: Air Pressure Sensor (15-700kPa) - I2C - MPX5700AP can be calibrated to known air pressure for quick measurement of pipeline air pressure values...
$90.72 AUD, inc GST

SparkFun Qwiic MicroPressure Sensor

Brand: SparkFun
The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor...
$72.35 AUD, inc GST

Pimoroni BME680 Breakout - Air Quality, Temperature, Pressure, Humidity Sensor

Brand: Pimoroni
The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible!
$38.20 AUD, inc GST

Fermion: BMP390L Digital Barometric Pressure Sensor (Breakout)

Brand: DFRobot
BMP390L is an industrial-grade dedicated digital barometric pressure sensor with high temperature stability, low drift, low power consumption (sleep...
$18.68 AUD, inc GST

SparkFun Environmental Sensor - BME688 (Qwiic)

Brand: SparkFun
The SparkFun BME688 Environmental Sensor combines a gas scanning sensor with temperature, humidity, & barometric pressure sensing for a complete AI sensor...
$66.80 AUD, inc GST

SparkFun Environmental Sensor Breakout - BME680 (Qwiic)

Brand: SparkFun
The SparkFun BME680 Environmental Sensor is a breakout that combines a gas sensor with temperature, humidity and barometric pressure sensing for a complete environmental...
$37.90 AUD, inc GST

Pressure Sensor - MS5803-14BA Breakout

Brand: SparkFun
This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes air, water, and anything else that acts like a viscous fluid. Depending on how you interpret the data, you can determine altitude, water depth, or any other tasks that require an accurate pressure reading. What makes the MS5803-14BA unique is the the gel membrane and antimagnetic stainless steel cap that protects against 30 bar water pressure.
$129.95 AUD, inc GST

SparkFun Pressure Sensor - BMP384 (Qwiic)

Brand: SparkFun
The SparkFun Qwiic Pressure Sensor features the BMP384 and excels at high-resolution measurements (up to 21-bit)...
$24.70 AUD, inc GST

SparkFun Micro Pressure Sensor - BMP384 (Qwiic)

Brand: SparkFun
The SparkFun Qwiic Micro Pressure Sensor features the BMP384 and excels at high-resolution measurements (up to 21-bit), all on an incredibly small board...
$30.35 AUD, inc GST

SparkFun Micro Pressure Sensor - BMP581 (Qwiic)

Brand: SparkFun
The SparkFun Qwiic Micro BMP581 Pressure Sensor is a standard-sized, 0.75in. by 0.3in. absolute pressure sensor breakout from Bosch Sensortec...
$39.60 AUD, inc GST

SparkFun Pressure Sensor - BMP581 (Qwiic)

Brand: SparkFun
The SparkFun Qwiic BMP581 Pressure Sensor is a standard-sized, 1in. by 1in. absolute pressure sensor breakout from Bosch Sensortec...
$37.80 AUD, inc GST

Gravity: I2C BME680 Environmental Sensor (VOC, Temperature, Humidity, Barometer)

Brand: DFRobot
DFRobot BME680 Environmental Sensor is a low power gas, pressure, temperature & humidity sensor based on BOSCH BME680 sensor. It is a 4-in-1 multi-functional MEMS...
$32.71 AUD, inc GST

Altitude/Pressure Sensor Breakout - MPL3115A2

Brand: SparkFun
Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it’s easy to interface with most controllers. Pressure output can be resolved with output in fractions of a Pascal, and Altitude can be resolved in fractions of a meter. The device also provides 12-bit temperature measurements in degrees Celsius.
$27.70 AUD, inc GST
Similar matches

Gravity: I2C SCD41 Infrared CO2 Sensor (400 - 5000 ppm)

Brand: DFRobot
The Gravity: SCD41 Infrared CO2 Sensor based on Sensirion SCD41 sensor is a CO2, temperature and humidity three-in-one sensor....
$73.43 AUD, inc GST

RP-L-170 Thin Film Pressure Sensor

Brand: DFRobot
This is a long flexible thin film pressure sensor with a length of 170mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable...
$10.51 AUD, inc GST

RP-C18.3-ST Thin Film Pressure Sensor

Brand: DFRobot
This is a circular flexible thin film pressure sensor of short legs with a diameter of 18.3mm, which can be used to realize highly sensitive detection of pressure...
$8.16 AUD, inc GST

Gravity: I2C Oxygen Sensor

Brand: DFRobot
The Gravity: I2C Oxygen Sensor is based on electrochemical principles and it can measure the ambient O2 concentration accurately and conveniently. With high anti-interference...
$88.53 AUD, inc GST

RP-S40-ST Thin Film Pressure Sensor 40mmx40mm

Brand: DFRobot
This is a square flexible thin film pressure sensor of short legs with a side length of 40mm, which can be used to realize highly sensitive detection of pressure...
$12.82 AUD, inc GST

Gravity: Thin-film Pressure Sensor for Pressure Science Course

Brand: DFRobot
The Gravity: Thin-film Pressure Sensor is ideal for science and engineering courses, it measures pressure from 20g to 6kg. Seamlessly integrates with...
$8.50 AUD, inc GST

Pimoroni Enviro + Air Quality for Raspberry Pi

Brand: Pimoroni
Monitor your world with Enviro + Air Quality for Raspberry Pi! There's a whole bunch of fancy environmental sensors on these boards, and a gorgeous little full-colour LCD to display your data. The perfect way to get started with citizen science and environmental monitoring!
$109.95 AUD, inc GST

RP-C7.6-LT Thin Film Pressure Sensor

Brand: DFRobot
This is a circular flexible thin film pressure sensor of long legs with a diameter of 7.6mm, which can be used to realize highly sensitive detection of pressure...
$6.41 AUD, inc GST

Gravity: Electrochemical Oxygen Sensor (0-100%Vol) - I2C

Brand: DFRobot
This full-scale oxygen sensor employs the original AO2 CiTiceL® oxygen sensor probe and features a measurement range of 0-100%Vol and I2C digital output,...
$161.31 AUD, inc GST

Gravity: O2 Sensor (Calibrated) - I2C & UART

Brand: DFRobot
The factory-calibrated oxygen sensor has a variety of signal output methods to meet various communication needs...
$147.17 AUD, inc GST

Analog Carbon Monoxide Sensor (MQ7)

Brand: DFRobot
The MQ7 is a simple-to-use Carbon Monoxide (CO) sensor suitable for sensing CO concentrations in the air.
$15.59 AUD, inc GST

Enviro Indoor (Pico W Aboard, board only)

Brand: Pimoroni
A wireless environmental monitoring board to keep track of inside conditions in your home, office or other habitat. Onboard sensors can measure temperature, humidity, pressure, gas and light.
$88.30 AUD, inc GST

Flexiforce Pressure Sensor - 100lbs.

Brand: SparkFun
This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.
$44.65 AUD, inc GST

Nicla Sense ME

Brand: Arduino
Bring smart sensing solutions to the edge, with the high-performance, low-power board that packs state-of-the-art Bosch Sensortec technology into our smallest form factor yet.
$96.05 AUD, inc GST

Arduino Explore IoT Kit Rev2

Brand: Arduino
Create, collaborate, impact: teach students how to use IoT technologies and design thinking to solve real-world challenges.
$304.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.