Skip to the beginning of the images gallery

Gravity: I2C Oxygen Sensor

SKU: SEN0322 Brand: DFRobot

The Gravity: I2C Oxygen Sensor is based on electrochemical principles and it can measure the ambient O2 concentration accurately and conveniently. With high anti-interference...

$88.35 AUD, inc GST

$80.32 AUD, exc GST

Available with a lead time
Expect dispatch between Dec 03 and Dec 09

Quantity Discounts:

6-12 $77.91 (exc GST)
12+ $76.30 (exc GST)

This Oxygen Sensor is based on electrochemical principles and it can measure the ambient O2 concentration accurately and conveniently. With high anti-interference ability, high stablility and high sensitivity,this arduino-compatible oxygen sensor can be widely applied to fields like portable device, air quality monitoring device, and industries, mines, warehouses and other spaces where air is not easy to circulate.

This compact dfrobot oxygen sensor supports I2C output, it can be calibrated in the air, can accurately measure the oxygen concentration in the environmentit. It is compatible with many mainboardslike Arduino Uno, esp32,Raspberry Pi and so on. Its measurement range is 0~25%Vol, and resolution can reach to 0.15%Vol. It supports wide range input voltage: 3.3V to 5.5V.Moreover, the lifetime is as long as 2 years. With simple Gravity interface and practical sample code, you can build your own oxygen concentration monitor easily and conveniently.

I2C Oxygen Sensor Selection Guide

Product	Gravity:Electrochemical Oxygen Sensor (0-25%Vol) - I2C	Gravity:Electrochemical O2 Sensor (Calibrated) - I2C & UART	Gravity:Electrochemical Oxygen Sensor (0-100%Vol) - I2C
SKU	SEN0322	SEN0465	SEN0496
Detection Range	0~25%Vol	0~25%Vol	0~100%Vol
Calibration Method	Manual calibration	Factory calibration	Manual calibration
Output Signal	I2C	I2C?UART?Analog	I2C
Working Principle	Electrochemical	Electrochemical	Electrochemical
Stability	<2%/Month	<2%/Month	<10%/Year
Response Time	=15S	=15S	0.1%~20.9%<40S 20.9%~100%<5S
Operating Pressure Range	101kPa±10%	101kPa±10%	0.5 - 2.0 Bar
Temperature Compensation	×	v	×

Features

High sensitivity
I2C Interface
Compatible with both 3.3V and 5V micro-controllers
Polarity protection

Specification

Detection of Gas: oxygen
Operating Voltage: 3.3 to 5.5V DC
Output Signal: I2C output
Measurement Range: 0~25%Vol
Maximum Measurement limit: 30%Vol
Resolution: 0.15%Vol
Sensitivity: (0.10±0.05) mA (in the air)
Stability: <2% (Every month)
Repeatability: <2%
Response Time: =15 seconds
Operating Temperature: -20~50°C
Operating humidity: 0~99%RH (no condensation)
Pressure Range: standard atmospheric pressure ±10%
Lifetime:> 2 years (in the air)
Dimension(L x W x H): 37 * 27 * 24.5 mm/1.46 * 1.06 * 0.97 inches
Weight:0.037kg

Documents

Parts List

Gravity: Electrochemical Oxygen Sensor (0-25%Vol, I2C) *1
Gravity-4pin I2C Cable *1
M3*10 Nylon post *4
M3*5 Screws *8

This product is listed in:

Sensors>Gas & Smoke

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!