Search results for: 'expansion'

50 results

PiicoDev LiPo Expansion Board for Raspberry Pi Pico

Brand: PiicoDev

The PiicoDev® LiPo Expansion Board for Raspberry Pi Pico is a great way to start experimenting with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.

$5.40 AUD, inc GST

PiicoDev Cable Expansion Kit

Brand: PiicoDev

Top up your PiicoDev Starter kit with a range of the most used cables!

$12.76 AUD, inc GST

Argon NEO PCIe Expansion Board for Raspberry Pi 5

Brand: Argon40

Level up your Argon NEO with an NVMe SSD, boot quicker or just add more storage - the option is yours!

$33.30 AUD, inc GST

PiicoDev Expansion Board for Pico (Non-Recharging)

Brand: PiicoDev

Start experimenting with high-tech sensors and modules with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.

$5.90 AUD, inc GST

Seeeduino XIAO Expansion board

Brand: Seeed Studio
A functional expansion board for Seeeduino XIAO of only half Raspberry Pi 4 size. With OLED display, embedded RTC, expandable memory mini SD card slot,...
$28.45 AUD, inc GST

MCP23017 IO Expansion Board, Expands 16 I/O Pins

Brand: Waveshare
The MCP23017 IO Expansion Board expands 2 signal pins as 16 I/O pins based on the I2C bus, up to 8 MCP23017 IO Expansion Board can be used at the same time, providing up to 128 I/O pins, it is compatible with both 3.3V and 5V levels.
$10.90 AUD, inc GST

Argon ONE v3 NVMe PCIe Expansion Board for Raspberry Pi 5

Brand: Argon40

An add-on that replaces the stock standard base that comes with the Argon ONE V3. Allows you to upgrade your Pi with an M.2 NVMe SSD.

$33.30 AUD, inc GST

Argon ONE V5 - M.2 NVME Single Slot Expansion Board

Brand: Argon40

Add a single NVMe drive to your Argon One V5 case - perfect for a desktop setup!

$42.65 AUD, inc GST

Gravity: MCP23017 IIC 16 Digital IO Expansion Module

Brand: DFRobot
This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module...
$9.93 AUD, inc GST

Gravity: IO Expansion Shield for Arduino V7.1

Brand: DFRobot
The new IO Expansion Shield V7 has arrived,from the best selling family of IO expansion shield for Arduino. For the past few years these expansion shields have been aiding thousands of makers to create,to expand, to share their sparkles of idea and ingenuity, and now comes the young V7.
$8.43 AUD, inc GST

Argon ONE M.2 Expansion Board

Brand: Argon40
Argon ONE M.2 Expansion Board extends support for M.2 SATA SSDs to maximize the true potential speeds of your Raspberry Pi 4. You will now be able to boot via an M.2 SATA SSD for faster boot times and larger storage capacity compared to the traditional microSD Card.
$40.55 AUD, inc GST

PCIe Expansion Board For Raspberry Pi 5

Brand: Waveshare
2-Ch PCIe FFC Adapter Board for Raspberry Pi 5, Expands The PCIe Interface Of The Pi 5 To 2-Ch PCIe FFC Connectors, Supports Stacking Multiple PCIe HATs,...
$23.70 AUD, inc GST

Pimoroni Pico Omnibus (Dual Expander)

Brand: Pimoroni
Double up your GPIO pins and attach two add-ons to a single Raspberry Pi Pico with our expansive Pico Omnibus!
$21.55 AUD, inc GST

ACEBOTT 5-DOF Robot Arm Expansion Kit for Smart Car

Brand: ACEBOTT

Adds precise multi-axis picking and placing to your smart car.

$55.40 AUD, inc GST

Argon ONE V5 - M.2 NVME Dual Slot Expansion Board

Brand: Argon40

Add two NVMe drives to your Argon One V5 case - great for a NAS or if you just need that extra space.

$55.75 AUD, inc GST

Micro:bit Driver Expansion Board

Brand: DFRobot
Since the advent of micro:bit, its simple and practical way of programming is widely loved by makers, students and teachers. Its sample design, coupled with a wealth...
$21.33 AUD, inc GST

IO Expansion Board for Raspberry Pi Pico

Brand: DFRobot
This IO expansion board brings out all IO pins of the Raspberry Pi Pico onto male and female connectors. All pins are clearly labeled to allow beginners...
$6.95 AUD, inc GST

I/O Expander - MCP23008

Brand: SparkFun
Add another eight pins to your microcontroller using a MCP23008 port expander. The MCP23008 uses two I2C pins which can be shared with other I2C devices, and in...
$3.70 AUD, inc GST

Mega IO Expansion Shield V2.3 For Arduino Mega

Brand: DFRobot
This is version 2.3 of the Mega IO Expansion shield. This shield is extra large and includes 3 Xbee slots, 1 microSD slot, Arduino shield headers to plugin most Arduino shields. It also includes a prototyping area and breakouts for Digital pins 14 to 53, Analog pins 6 to 15 and PWM pins 2 to 9. This shield can be a major communications hub for your projects.
$16.80 AUD, inc GST

2-Channel Isolated RS232 Expansion HAT

Brand: Waveshare
2-Channel Isolated RS232 Expansion HAT for Raspberry Pi, SC16IS752+SP3232 Solution, with Multi Onboard Protection Circuits
$26.55 AUD, inc GST

M5Stack 1 to 3 HUB Expansion Unit

Brand: M5Stack
HUB is a unit that is used in order to expand the GROVE ports over the M5Stack device. For example, if we want sensors with different IIC addresses or output to 3 devices at the same time. (M5Stack device usually can output one device at a time to to limited amount of grove ports)
$7.25 AUD, inc GST

GPIO Multi-Function Expansion Board (Pi 4B/3B/3B+)

Brand: Core Electronics

This handy HAT sits right on the top of your Pi, and will break out the 40-Pin header on your Raspberry Pi 3B, 3B+ and 4B into 3 banks of pins, and adjacent pins to these connect to screwless spring terminals on the outside of the board.

$6.10 AUD, inc GST

Gravity: Expansion Board for Raspberry Pi Pico

Brand: DFRobot
This Gravity Expansion Board, specifically designed for Raspberry Pi Pico, is compatible with a variety of Gravity sensors and modules, offering...
$9.44 AUD, inc GST

Raspberry Pi High-Precision AD/DA Expansion Board

Brand: Waveshare
Raspberry Pi AD/DA Expansion...
$57.05 AUD, inc GST

IO Expansion Hat for Raspberry Pi 3/4/400

Brand: DFRobot
When making Raspberry Pi projects or learning to use Raspberry Pi for python programming, we may often need to check its Pinout Table to find out the BCM and WiringPi...
$8.77 AUD, inc GST

IO Expansion HAT for Raspberry Pi 4B/3B+

Brand: DFRobot
This IO Expansion HAT from DFRobot is the perfect companion for your Raspberry Pi 4B/3B+! It leads out all of the IO ports on Raspberry Pi including digital port...
$15.67 AUD, inc GST

FTC Starter Kit Upgrade Pack (2025-2026 to 2026-2027 Season)

Brand: goBILDA

Bring last season's goBILDA® FTC kit up to spec for 2026-2027, adding only the new parts.

$432.88 AUD, inc GST

Serial Expansion HAT for Raspberry Pi

Brand: Waveshare
Serial Expansion HAT for Raspberry Pi, I2C Interface, 2-ch UART, 8 GPIOs
$21.35 AUD, inc GST

UPS Expansion HAT for LattePanda Sigma Single Board Computer

Brand: DFRobot
The UPS HAT is an expansion board for LattePanda Sigma SBC, featuring 18650 lithium-ion batteries, TypeC PD and 5.5mm DC interfaces for external power...
$82.92 AUD, inc GST

Multi Function Expansion Board for UNIHIKER K10 and micro:bit (Power & Motion)

Brand: DFRobot
Power up UNIHIKER or micro:bit projects with this all-in-one expansion board. Drive 4 DC motors & 6 servos, and add portable power with its 18650 battery...
$27.56 AUD, inc GST

micro:bit Expansion Board for Boson (Gravity Compatible)

Brand: DFRobot
micro:bit is a pocket-sized microcontroller designed for kids and beginners to learn coding and electronics, letting them easily bring ideas into DIY digital games...
$15.44 AUD, inc GST

Raspberry Pi Motor Driving Expansion Board (Compatible with Raspberry Pi 4B / 3B+ / 3B / Zero)

Brand: DFRobot
The fully-featured robot motor expansion board supports multiple motors and servos. Perfect for Raspberry Pi Zero/Zero W/A+/B+/2B/3B/3B+/4B. ...
$49.21 AUD, inc GST

Tiny FX 6-LED Expansion Board (2-Pack)

Brand: Pimoroni
Expand your Tiny FX LED projects with this 6-port expansion board featuring JST-SUR connectors and adhesive backing for easy mounting, sold in a convenient 2-pack.
$8.45 AUD, inc GST

STEAM+ Coding Expansion Pack

Brand: Sphero
Sphero's educational STEM robots and STEAM kits introduces kids 5+ to coding concepts, programming, and circuitry through play-based learning. Shop Sphero!...
$309.00 AUD, inc GST

Expander Pi

Brand: AB Electronics
Expander Pi is a versatile digital and analogue expansion board. It allows you to connect your Raspberry Pi to switches, lights, sensors, and many other devices giving you a way to communicate with the outside world.
$46.50 AUD, inc GST

Xia mi Multi-functional Expansion Board for BBC micro:bit V2

Brand: DFRobot
This is a micro:bit V2-based multi-functional expansion board for programming education. Featuring a small size of 57*87mm and a compact layout, the board ...
$56.13 AUD, inc GST

RGB LED Expansion Kit for Tiny FX

Brand: Pimoroni
Expand your Tiny FX with 5 RGB LED dots using this expansion kit, featuring a 6-port expansion board and easy-connect JST-SUR connectors for custom lighting projects.
$12.95 AUD, inc GST

Terminal GPIO Expansion for Pico

Brand: The Pi Hut
This one is for all the makers and designers who want to use terminal blocks with the Pico's GPIO. The Terminal GPIO Expansion allows you to use both...
$22.80 AUD, inc GST

Romi Chassis Expansion Plate - Black

Brand: Pololu
This Romi Chassis accessory offers a convenient way to expand your Romi robot vertically by adding new tiers. The expansion plate has the same diameter as...
$12.25 AUD, inc GST

Environment Science Expansion Board V2.0 for micro:bit

Brand: DFRobot
This micro:bit-based expansion board, specially designed for STEAM education, allows students to measure environmental conditions for scientific experiments by using...
$185.61 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.