Search results for: 'input output expansion'

50 results

Adafruit MCP23017 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
We’ve gotten a lot of requests for a MCP23017 breakout and we’ve always sorta been like “ehh why not just use the DIP chip?” but...
$11.25 AUD, inc GST

MCP23017 IO Expansion Board, Expands 16 I/O Pins

Brand: Waveshare
The MCP23017 IO Expansion Board expands 2 signal pins as 16 I/O pins based on the I2C bus, up to 8 MCP23017 IO Expansion Board can be used at the same time, providing up to 128 I/O pins, it is compatible with both 3.3V and 5V levels.
$10.90 AUD, inc GST

Gravity: MCP23017 IIC 16 Digital IO Expansion Module

Brand: DFRobot
This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module...
$9.93 AUD, inc GST

Adafruit PCF8574 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Expand your project possibilities, with the Adafruit PCF8574 GPIO Expander Breakout - an affordable 8 channel I2C expander.GPIO expanders work like this:...
$8.95 AUD, inc GST

Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Expand your project possibilities, with the Adafruit AW9523 GPIO Expander and LED Driver Breakout - a cute and powerful I2C expander with a lot of tricks up it's sleeve.
$9.70 AUD, inc GST

Kitronik Compact Robotics Board for BBC micro:bit

Brand: Kitronik
With the Kitronik Compact Robotics Board, the BBC micro:bit can be used to drive 4 motors (or 2 stepper motors) and 8 servos. Coupled with 17 other I/O expansion points, this means the BBC micro:bit can very easily become the core of a whole variety of robotics projects.
$35.60 AUD, inc GST

Arduino Opta Ext A0602

Brand: Arduino
Arduino Pro Opta Ext A0602 enhances your Arduino Opta’s real-time control, monitoring and predictive maintenance applications with the addition of 6...
$394.95 AUD, inc GST

Micro:bit Driver Expansion Board

Brand: DFRobot
Since the advent of micro:bit, its simple and practical way of programming is widely loved by makers, students and teachers. Its sample design, coupled with a wealth...
$21.33 AUD, inc GST

I/O Expander - MCP23008

Brand: SparkFun
Add another eight pins to your microcontroller using a MCP23008 port expander. The MCP23008 uses two I2C pins which can be shared with other I2C devices, and in...
$3.70 AUD, inc GST

MCP23017 - i2c 16 input/output port expander

Brand: Adafruit
Add another 16 pins to your microcontroller using a MCP23017 port expander. The MCP23017 uses two i2c pins (these can be shared with other i2c devices), and in exchange...
$13.60 AUD, inc GST

MCP23008 - i2c 8 input/output port expander

Brand: Adafruit
Add another 8 pins to your microcontroller using a MCP23008 port expander. The MCP23008 uses two i2c pins (these can be shared with other i2c devices), and in exchange...
$3.95 AUD, inc GST

M5Stack 1 to 3 HUB Expansion Unit

Brand: M5Stack
HUB is a unit that is used in order to expand the GROVE ports over the M5Stack device. For example, if we want sensors with different IIC addresses or output to 3 devices at the same time. (M5Stack device usually can output one device at a time to to limited amount of grove ports)
$7.25 AUD, inc GST

Raspberry Pi High-Precision AD/DA Expansion Board

Brand: Waveshare
Raspberry Pi AD/DA Expansion...
$57.05 AUD, inc GST

Adafruit PCF8575 I2C 16 GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Expand your project possibilities, with the Adafruit PCF8575 GPIO Expander Breakout - an affordable 16 channel I2C expander.GPIO expanders work like this:...
$10.70 AUD, inc GST

IO Expansion HAT for Raspberry Pi 4B/3B+

Brand: DFRobot
This IO Expansion HAT from DFRobot is the perfect companion for your Raspberry Pi 4B/3B+! It leads out all of the IO ports on Raspberry Pi including digital port...
$15.67 AUD, inc GST

SparkFun 16 Output I/O Expander Breakout - SX1509

Brand: SparkFun

The SX1509 Breakout is a 16-channel GPIO expander that adds fully configurable digital I/O to your microcontroller using just two I2C wires. It also handles PWM for LED dimming, can blink or breathe pins, and has a built-in keypad engine for up to 64 buttons.

$13.35 AUD, inc GST

IO Expansion HAT for Pi Zero/Zero W

Brand: DFRobot
This DFRobot IO Expansion HAT provides Digital, Analog, I2C, PWM, UART and SPI port to meet all your needs. It is pretty small and perfectly suitable for Raspberry...
$17.63 AUD, inc GST

Serial Expansion HAT for Raspberry Pi

Brand: Waveshare
Serial Expansion HAT for Raspberry Pi, I2C Interface, 2-ch UART, 8 GPIOs
$21.35 AUD, inc GST

Gravity: IO Expansion & Motor Driver Shield

Brand: DFRobot
Gravity IO Expansion Shield with Motor Driver is a new product designed for Arduino Boards. It combines IO Expansion Shield and DC Motor Driver Shield, equipped...
$26.74 AUD, inc GST

Expander Pi

Brand: AB Electronics
Expander Pi is a versatile digital and analogue expansion board. It allows you to connect your Raspberry Pi to switches, lights, sensors, and many other devices giving you a way to communicate with the outside world.
$46.50 AUD, inc GST

RevPi AIO - Analog IO expansion module

Brand: Pimoroni
Using the analog I/O module RevPi AIO your RevPi base module can be expanded by 4 analog inputs, 2 analog outputs and 2 RTD input channels.
$714.95 AUD, inc GST

Pimoroni IO Expander Breakout

Brand: Pimoroni
Add oodles of extra analog-friendly input and output pins to your Raspberry Pi project!
$16.45 AUD, inc GST

Gravity: I/O Expansion Shield for Pyboard

Brand: DFRobot
Gravity: I/O Expansion Shield for pyboard is an multifunctional expansion shield specially designed for pyboard v1.1. It is compatible with various sensors and electronic...
$6.59 AUD, inc GST

Adafruit GPIO Expander Bonnet - 16 Additional I/O over I2C

Brand: Adafruit
The Raspberry Pi is an amazing single board computer - and one of the best parts is that GPIO connector! 40 pins of digital goodness you can twiddle to control LEDs...
$18.25 AUD, inc GST

Gravity I/O Expansion Shield for OpenMV Cam M7

Brand: DFRobot
Gravity: I/O Expansion Shield for OpenMV Cam M7 is an expansion shield specially designed for the OpenMV Cam M7. It is compatible with various sensors and electronic...
$8.31 AUD, inc GST

Gravity: CH423 I2C 24 Digital IO Expansion Module

Brand: DFRobot
This CH423 IO expansion board extends 24 digital ports via I2C, including 8 GPIOs with interrupt functions and 16 GPOs...
$8.34 AUD, inc GST

Xia mi Multi-functional Expansion Board for BBC micro:bit V2

Brand: DFRobot
This is a micro:bit V2-based multi-functional expansion board for programming education. Featuring a small size of 57*87mm and a compact layout, the board ...
$56.13 AUD, inc GST

IO Expansion Shield for Arduino (V6)

Brand: DFRobot
Our IO expansion board is evolving, the V6 IO Expansion Shield is now supporting Xbee and has colour coded pin header. It combines our popular Xbee shield with IO expansion shield(V4). It even supports SD card which provides the ultimate functional expansion for Arduino so far. As its predecessor, it supports RS485, APC220, Bluetooth , Xbee communication, servo control.
$14.99 AUD, inc GST

RevPi Digital IO modules - DI

Brand: Pimoroni
Expand your Revolution Pi system by adding digital I/O expansion modules.
$344.95 AUD, inc GST

Multi Function Expansion Board for UNIHIKER M10 / K10 & micro:bit (Power & Motion)

Brand: DFRobot
Supercharge UNIHIKER K10/M10 projects. The all-in-one expansion board adds a motor driver, 18650 power, and extensive IO, solving pin and power...
$30.87 AUD, inc GST

IO Pi Plus

Brand: AB Electronics
The IO Pi Plus is a 32 channel digital expansion board designed for use on the Raspberry Pi. The board is based around the MCP23017 16-bit I/O expander from Microchip Technology Inc. A pair of MCP23017 expanders are included on the board allowing you to connect up to 32 digital inputs or outputs to the Raspberry Pi. The IO Pi Plus is powered through the host Raspberry Pi using the GPIO port and extended pins on the GPIO connector allow you to stack the IO Pi Plus along with other expansion boards.
$28.60 AUD, inc GST

Shiftout Module

Brand: DFRobot
At sometime or another you may run out of pins on your Arduino board and need to extend it with shift registers. With this shift out module which is based on 74HC595.
$6.87 AUD, inc GST

RevPi Digital IO modules - DIO

Brand: Pimoroni
Expand your Revolution Pi system by adding digital I/O expansion modules.
$419.95 AUD, inc GST

RevPi Digital IO modules - DO

Brand: Pimoroni
Expand your Revolution Pi system by adding digital I/O expansion modules.
$369.95 AUD, inc GST

FireBeetle Covers-Gravity I/O Expansion Shield

Brand: DFRobot
DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at...
$11.62 AUD, inc GST

Gravity IO Expansion Shield for LattePanda

Brand: DFRobot
This Gravity I/O expansion shield, which is made for LattePanda, breakouts all GPIO pins to make it compatible with standard Arduino device and no interruption with...
$17.83 AUD, inc GST

Pimoroni Automation HAT Mini for Raspberry Pi Zero

Brand: Pimoroni
Automate your world with Automation HAT Mini! Monitor and control up to 24V systems and see their status on the gorgeous full-colour display.
$48.15 AUD, inc GST

IO Zero 32

Brand: AB Electronics
32 channel IO expander for the Raspberry Pi B+ computer boards...
$25.65 AUD, inc GST

PiicoDev LiPo Expansion Board for Raspberry Pi Pico

Brand: PiicoDev

The PiicoDev® LiPo Expansion Board for Raspberry Pi Pico is a great way to start experimenting with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.

$5.40 AUD, inc GST

PiicoDev Expansion Board for Pico (Non-Recharging)

Brand: PiicoDev

Start experimenting with high-tech sensors and modules with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.

$5.90 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.