Search results for: 'arduino mini'

47 results

Arduino Pro Mini 328 - 3.3V/8MHz

Brand: Sparkfun
It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.
$19.50 AUD, inc GST

Pro Mini 05 Board

Brand: Core Electronics
It’s blue! It’s thin! It’s the Pro Mini! This is a 5V board running the 16MHz bootloader. Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need
$4.30 AUD, inc GST

Arduino Pro Mini 328 - 5V/16MHz

Brand: Sparkfun
It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.
$19.35 AUD, inc GST

Qduino Mini V2

Brand: Sparkfun
The Qduino Mini V2 is a tiny, Arduino-compatible board with a battery connector and charger built-in as well as a fuel gauge that can tell you when to charge the battery! This little guy is super small, inexpensive, and is perfect to embed in your electronics projects. The Qduino Mini V2 is the same model awarded to its Kickstarter backers and is Arduino-compatible and 100% open source, meaning that making and programming your first circuit is a breeze.
$58.90 AUD, inc GST

Arduino Nano Every

Brand: Arduino
Turn your ideas into a reality quickly with the new Arduino Nano Every.
$22.20 AUD, inc GST

Seeed XIAO RP2040 - Supports Arduino, MicroPython and CircuitPython

Brand: Seeed Studio
Description XIAO RP2040 is a microcontroller using the Raspberry RP2040 chip. It runs at up to 133MHz, is built with rich interfaces in a tiny thumb...
$9.05 AUD, inc GST

Arduino Nano V3.2

Brand: Arduino
The Arduino Nano is a smaller form factor version of the Arduino UNO, one that is breadboard-friendly! It runs at 5V on the ATmega328, doesn't come with the DC power jack from the Uno and instead has a USB-mini B port for power/data purposes…
$45.66 AUD, inc GST

Arduino Micro

Brand: Arduino
The Arduino Micro is a small version of the Arduino Leonardo with two more analog inputs and a breadboard-friendly form factor
$41.70 AUD, inc GST

Seeeduino XIAO (Pre-Soldered)

Brand: Seeed Studio
Seeeduino XIAO is the smallest Arduino compatible board in Seeeduino Family. It is an Arduino microcontroller that is embedded with the SAMD21 microchip....
$13.90 AUD, inc GST

DFRduino Nano (Arduino Nano Compatible)

Brand: DFRobot
The DFRduino Nano USB Microcontroller V3.1 (ATMega 328) is a breadboard ready version of the Arduino mini with integrated USB. The Nano has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The Nano automatically senses and switches to the higher power supply, so there is no need for a power select jumper.
$11.10 AUD, inc GST

Adafruit Metro Mini 328 V2 - Arduino-Compatible - 5V 16MHz - STEMMA QT / Qwiic

Brand: Adafruit
One of our star development boards is the Adafruit METRO Mini 328, an excellent lil fellow that lets you make your Arduino-based project tiny. Recently...
$25.95 AUD, inc GST

Romeo BLE mini - Small Arduino Robot Control Board with Bluetooth 4.0

Brand: DFRobot
Romeo BLE mini is a simplified version of Romeo board. It inherits all functions of Romeo BLE. Moreover, IT GOT A SMALLER SIZE! Yes, you got it all. It has 8 Digital pins, 4 analog pins and integrates Bluetooth 4.0 wireless communication function.
$41.90 AUD, inc GST

Adafruit Metro Mini 328 - 5V 16MHz

Brand: Adafruit
We sure love the ATmega328 here at Adafruit, and Adafruit use them a lot for Adafruit's own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C...
$25.95 AUD, inc GST

SparkFun BlueSMiRF v2 - Headers

Brand: Sparkfun
The SparkFun BlueSMiRF v2 with headers uses Bluetooth® to transform your serial connection into a wireless link...
$38.75 AUD, inc GST

FTDI Cable 5V VCC-3.3V I/O

Brand: Sparkfun
The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The VCC pins of this FTDI cable are configured to operate at 5V with 3.3V I/O.
$44.15 AUD, inc GST

3D Gesture Sensor (Mini) For Arduino

Brand: DFRobot
The DFRobot 3D gesture sensor is an interactive sensor that integrates 3D gesture recognition and motion tracking. This sensor can be used to detect clockwise/counterclockwise rotation and movement directions.
$52.25 AUD, inc GST

Mini 2MP SPI Camera Module for Raspberry Pi Pico

Brand: The Pi Hut
This small Arducam Mini 2MP Plus OV2640 SPI camera module is great for using with the Raspberry Pi Pico and other platforms such as Arduino. 5MP version...
$70.25 AUD, inc GST

USB Serial Light Adapter (Arduino Compatible)

Brand: DFRobot
This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno.
$20.70 AUD, inc GST

SparkFun BlueSMiRF v2

Brand: Sparkfun
The SparkFun BlueSMiRF v2 uses Bluetooth® to transform your serial connection into a wireless link...
$33.40 AUD, inc GST

Adafruit Pro Trinket - 5V 16MHz

Brand: Adafruit
Trinket's got a big sister in town - the Pro Trinket 5V! Pro Trinket combines everything you love about Trinket with the familiarity of the common core Arduino chip...
$17.55 AUD, inc GST

SparkFun SAMD21 Mini Breakout

Brand: Sparkfun
If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Mini Breakout is a great landing spot. The SAMD21 Mini Breakout is a Pro Mini-sized breakout for the Atmel ATSAMD21G18, a 32-bit ARM Cortex-M0+ processor with 256KB flash, 32KB SRAM, and an operating speed of up to 48MHz. This mini breakout provides you with an Arduino hardware option that solves the problems of low storage limits and dynamic memory stack overflows that have plagued the previous iterations of the Arduino family. Yes, the SparkFun SAMD21 Mini Breakout is even fully supported in the Arduino IDE and libraries for the Arduino Zero!
$41.50 AUD, inc GST

A-Star 32U4 Mini LV

Brand: Pololu
The A-Star 32U4 Mini LV is a programmable module based on the ATmega32U4 from Atmel. Unlike competing products, it has an onboard switching step-up/step-down regulator that allows it to be powered efficiently from a 2.7 V to 11.8 V supply. This compact 1.9″ × 0.7″ board breaks out all 26 of the microcontroller’s I/O pins (of which 7 can be used as PWM outputs and 12 as analog inputs), and loading programs is made easier by a Micro-USB interface and a preloaded Arduino-compatible bootloader.
$50.05 AUD, inc GST
Similar matches

Arduino Uno R3

Brand: Arduino
The Arduino UNO is the most used board in the family of Arduino boards. If you are starting out with Arduino, this is the board to get.
$49.02 AUD, inc GST

Arduino UNO Q - 2GB

Brand: Arduino

Combining a high-performance Linux CPU with real-time control - capable of running modern tasks such as machine vision, voice recognition. All bundled into a powerful, easy-to-use Uno board.

$59.00 AUD, inc GST $76.50

Arduino Nano 33 IoT

Brand: Arduino
The ease of use of a Nano board with the addition of secure IoT and BT connectivity.
$40.90 AUD, inc GST

Arduino Starter Kit R4

Brand: Arduino

Arduino's latest hands-on beginner electronics kit with a growing list of official projects using a considered mix of components, one of their most versatile microcontrollers, the Uno R4, and lessons, teaching coding, prototyping, with a certificate at the end!

$169.95 AUD, inc GST

Beetle ESP32 C6 Mini Development Board

Brand: DFRobot
Beetle ESP32 C6 is a mini, low-power RISC-V IoT development board that supports Wi-Fi 6, BLE 5, Zigbee, Matter Network, and Thread. Ideal for smart home...
$8.95 AUD, inc GST

Arduino Nano R4

Brand: Arduino
The Arduino Nano R4 without headers brings the robust performance of the RA4M1 microcontroller into the beloved Nano form factor, offering a compact and production-ready solution for embedded development, industrial automation, and custom hardware design.
$22.10 AUD, inc GST

Arduino Nano ESP32

Brand: Arduino
This board brings all the power of the well-known ESP32-S3 with the full support of the Arduino ecosystem, allowing makers to explore the world of Arduino and MicroPython without any blocks.
$31.80 AUD, inc GST

Arduino Nano R4 (with headers)

Brand: Arduino
The Arduino Nano R4 with headers brings the robust performance of the RA4M1 microcontroller into the beloved Nano form factor, offering a compact, ready-to-use solution for embedded development, creative prototyping, and educational projects.
$23.95 AUD, inc GST

Arduino UNO R4 Minima

Brand: Arduino
Introducing the Arduino UNO R4 Minima! This board boasts the RA4M1 microprocessor from Renesas, delivering increased processing power, expanded memory, and additional peripherals.
$35.42 AUD, inc GST

Arduino Due

Brand: Arduino
The Arduino Due is the first Arduino board based on a 32-bit ARM core microcontroller. With 54 digital input/output pins, 12 analog inputs, it is the perfect board for powerful larger scale Arduino projects.
$99.35 AUD, inc GST

Arduino Plug and Make Kit

Brand: Arduino
Arduino from Zero to Hero! This is a beginner-friendly way to spark a passion in DIY electronics.
$174.95 AUD, inc GST

Arduino Uno SMD Rev3

Brand: Arduino
The Arduino Uno SMD R3 is a microcontroller board based on the ATmega328 (datasheet).
$52.60 AUD, inc GST

Adafruit Trinket - Mini Microcontroller - 5V Logic

Brand: Adafruit
As of October 9th, 2015 the 5V Trinket comes with a micro-USB connector instead of a mini-USB connector! Trinket may be small, but do not be fooled by its size!...
$12.20 AUD, inc GST

LANA TNY - CH32V203 mini microcontroller board by PHVX BV

Brand: Adafruit
TNY is PHVX BV's take on our Adafruit QT Py and Seeed studio XIAO bite-sized development boards but with added SMD pins for optional extra IO...
$14.10 AUD, inc GST

Adafruit Trinket - Mini Microcontroller - 3.3V Logic - MicroUSB

Brand: Adafruit
Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. Adafruit...
$13.65 AUD, inc GST

Arduino Student Kit

Brand: Arduino
Learn the basics of programming, coding, and electronics including current, voltage, and digital logic. No prior knowledge or experience is necessary as the kit guides you through step by step.
$174.95 AUD, inc GST

Maker Pi Pico Mini - Pre-Soldered Raspberry Pi Pico W

Brand: Pimoroni
Simplifying Projects with Raspberry Pi Pico Small but Mighty Love the Maker Pi Pico but can't fit it into your project? Now we have the Maker Pi Pico...
$38.60 AUD, inc GST

SparkFun AST-CAN485 Dev Board

Brand: Sparkfun
The SparkFun AST-CAN485 Dev Board is a miniature Arduino in the compact form factor of the Pro Mini. In addition to all the usual features that a mini Arduino has...
$119.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.