Search results for: 'accelerometer module'
MPU-6050 Module 3 Axis Gyroscope + Accelerometer
Brand: Core Electronics
A 3-axis gyroscope and 3-axis accelerometer housed on a development board ready for prototyping.
$4.60 AUD, inc GST
WisBlock Meshtastic Starter Kit - 9xxMHz (RAK19003 Base Board)
Brand: RAKwireless
Build DIY customised off-grid LoRa mesh networks with high-gain rubber antennas and Nordic nRF52840 cores for reliable kilometre-range connectivity.
$39.30 AUD, inc GST
Serial 6-Axis Accelerometer for Arduino
Brand: DFRobot
This module integrates high-precision gyroscopes, accelerometer, microprocessor of high-performance and advanced dynamics solves and Kalman filter algorithms that...
$41.85 AUD, inc GST
ADXL335 Triple Axis Accelerometer (GY-61)
Brand: Core Electronics
If you need a low-power, low-cost accelerometer with analogue output, take a look at this module. powered by the triple-axis ADXL335 accelerometer with a measurement range of up to ±3.6 g.
$13.35 AUD, inc GST
ADXL345 Triple Axis Accelerometer (GY-291)
Brand: Core Electronics
If your project is need of an accelerometer, take a look at this module. On-board is an ADXL345 triple axes accelerometer with high resolution (13-bit) up to ±16 g. The digital output data is formatted as 16-bit twos complement and accessible through either a SPI or I2C.
$3.95 AUD, inc GST
Arduino Nano 33 IoT with headers
Brand: Arduino
An IoT connected IMU sensor in the Nano form factor.
$43.30 AUD, inc GST
LilyPad Accelerometer ADXL335
Brand: Sparkfun
This is a three axis accelerometer for the LilyPad system. Based on the ADXL335 MEMS accelerometer from Analog Devices, the LilyPad Accelerometer can detect joint movement as well as inclination and vibration.
$31.40 AUD, inc GST
Sphero BOLT - Power Pack
Brand: Sphero
The Sphero BOLT Power Pack is the best kit for Educator looking to use Sphero Edu in a classroom, robotics club, or in any maker environment. It comes with all of the robots and accessories you need.
$5495.00 AUD, inc GST
CMPS11-Tilt Compensated Magnetic Compass
Brand: DFRobot
The CMPS11 is our 3rd generation tilt compensated magnetic compass. It packs a 3-axis magnetometer, a 3-axis gyro and a 3-axis accelerometer. A Kalman filter combines the gyro and accelerometer to remove the errors caused by tilting of the PCB. The CMPS11 presents a result of 0-3599 representing 0-359.9 or 0 to 255.
$59.40 AUD, inc GST
Advance Sensor Set for Arduino
Brand: DFRobot
If you want to start playing with sensors, this kit will be the perfect choice for you to get started.
$139.95 AUD, inc GST
Arduino Nano 33 IoT
Brand: Arduino
The ease of use of a Nano board with the addition of secure IoT and BT connectivity.
$40.90 AUD, inc GST
Seeed XIAO Starter Kit - Microcontroller Development Essentials
Brand: Seeed Studio
Discover the Seeed XIAO Starter Kit - Microcontroller Development Essentials, perfect for beginners and hobbyists. Learn the basics of microcontroller programming with this comprehensive kit featuring the Seeed XIAO board. Ideal for DIY electronics projects and prototyping.
$119.95 AUD, inc GST
Arduino Sensor Kit - Base
Brand: Arduino
Learn to Plug, Sketch and Play with basic Grove sensors, actuators and Arduino. All the modules are pre-wired on the PCB, just connect your Arduino Board to the Shield and start your measurements!
$72.55 AUD, inc GST
Python for Microcontrollers: Getting Started with MicroPython
Brand: Adafruit
MicroPython is a tiny open-source Python programming language interpreter that runs on microcontroller, originally written by Damien George (http://micropython.org/)...
$83.40 AUD, inc GST
BMX160 9-axis Sensor Module(V1.0)
Brand: DFRobot
This compact BMX160 9-axis sensor from Bosch Sensortec is an ideal solution for applications that face strict constraints of board space, power consumption, and...
$23.75 AUD, inc GST
Firebeetle Covers-OLED12864 Display
Brand: DFRobot
DFRobot FireBeetle series is low-power development board designed for the IoT projects. This FireBeetle covers display module is equipped with 128x64 resolution...
$22.90 AUD, inc GST
ZL9NSQ Wireless 3D Attitude Sensor Module for Posture Detection
Brand: DFRobot
The ZL9NSQ 3D Attitude Sensor Module, offering unparalleled accuracy for posture monitoring, gaming and entertainment device, Featuring IMU Motion Engine...
$114.95 AUD, inc GST
Makeblock AI Camera 2.0
Brand: Makeblock
AI vision module with 9 built-in models, offline training and edge AI, easily add to the mBot2 and CyberPi via mBuild for face, colour, gesture tracking and many more.
$169.95 AUD, inc GST
Fermion: ICG 20660L Accel+Gyro 6-Axis IMU Module (Breakout)
Brand: DFRobot
The ICG-20660L is a high-precision 6-axis IMU module that integrates a 3-axis accelerometer, a 3-axis gyroscope, and on-chip 16-bit ADCs. With up to ±1%...
$38.05 AUD, inc GST
ESP32-S3 2inch Display Development Board with camera
Brand: Waveshare
ESP32-S3 2inch Display Development Board, 240×320 Pixels, IPS Panel, 262K color, 32-bit LX7 Dual-core Processor, Up To 240MHz Frequency, Supports WiFi &...
$30.45 AUD, inc GST
SparkFun Essential Sensor Kit V2
Brand: Sparkfun
The SparkFun Essential Sensor Kit V2 includes a variety of basic sensors for any beginner or experienced programmer...
$66.90 AUD, inc GST
SparkFun GPS-RTK Dead Reckoning Breakout - ZED-F9R, SMA (Qwiic)
Brand: Sparkfun
The SparkFun ZED-F9R GPS-RTK Breakout is a high-precision Automotive Dead Reckoning board with equally impressive configuration options...
$489.95 AUD, inc GST
mBot2 - Starter Kit
Brand: Makeblock
A STEM robotics kit for makers and classrooms to teach AI and IoT via the CyberPi Controller - integrating WiFi, Bluetooth, precise encoder motors, sensors, and coding through block-based methods, to Python coding.
$224.95 AUD, inc GST
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055 - STEMMA QT / Qwiic
Brand: Adafruit
If you've ever ordered and wire up a 9-DOF sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer, gyroscope, and magnetometer into actual "3D space orientation"! Orientation is a hard problem to solve. The sensor fusion algorithms (the secret sauce that blends accelerometer, magnetometer, and gyroscope data into stable three-axis orientation output) can be mind-numbingly difficult to get right and implement on low-cost real-time systems.
$53.95 AUD, inc GST
Seeed Studio BeagleBone Green Wireless IOT Developer Prototyping Kit for Google Cloud Platform
Brand: BeagleBone
Since the advent of Internet of Things(IoT), developers all feel an urge to build a thing or two to introduce the IoT capabilities into their business...
$224.95 AUD, inc GST
SparkFun GNSS Flex pHAT - LG290P & IM19 IMU
Brand: Sparkfun
Harness the power of Quectel's advanced GNSS technology with the SparkFun LG290P & IM19 GNSS Flex pHAT. This all-in-one module pairs the robust, quad-band...
$654.95 AUD, inc GST
Seeed Wio Terminal
Brand: Seeed Studio
Wio (Wireless input output) Terminal is more of a complete system equipped with Screen + Development Board + Input/Output Interface + Enclosure, making it an efficient and Product-Ready Product. Compatible with Arduino and MicroPython!
$71.90 AUD, inc GST
Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
Brand: DFRobot
The BMI160 6-axis inertial motion sensor is a new product from DFRobot. It is based on Bosch BMI160 6-axis MEMS sensor which integrates 16-bit 3-axis accelerometer...
$16.65 AUD, inc GST
Gravity: I2C LIS2DW12 Triple Axis Accelerometer Sensor (±2g/±4g/±8g/±16g)
Brand: DFRobot
The LIS2DW12 is an ultra-low-power high-performance three-axis linear accelerometer. It has user-selectable full scales of ±2g/±4g/±8g/±16g and is capable of measuring...
$7.30 AUD, inc GST
SparkFun GPS Dead Reckoning Breakout - NEO-M8U (Qwiic)
Brand: Sparkfun
The SparkFun NEO-M8U GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered...
$129.95 AUD, inc GST
Grove - 3-Axis Digital Accelerometer(±1.5g) (Seeed Studio)
Brand: Seeed Studio
This 3-axis Accelerometer module is based on MMA7660FC with Digital Output I2C. This Module can be used for sensing data changes, product orientation...
$18.40 AUD, inc GST
6 DOF Sensor - MPU6050
Brand: DFRobot
At the beginning,the inertial measurement unit is an electronic device that measures and reports on a craft's velocity, orientation, and gravitational forces, using a combination of accelerometers,gyroscopes, and magnetometers.
$23.30 AUD, inc GST
Adafruit LSM303AGR Accelerometer Magnetometer - STEMMA QT Qwiic
Brand: Adafruit
Do you know which way the wind blows? You will now, with this triple-axis accelerometer/magnetometer compass module. Inside are two sensors, one is a classic 3-axis...
$21.60 AUD, inc GST
reTerminal - Embedded Linux with Raspberry Pi CM4 and 5-Inch Capacitive Multi-Touch Screen
Brand: Seeed Studio
reTerminal is powered by a Raspberry Pi Compute Module 4 (CM4) which is a Quad-Core Cortex-A72 CPU running at 1.5GHz and a 5-inch IPS capacitive...
$419.95 AUD, inc GST
Environment Sensors Module for Raspberry Pi Pico
Brand: Waveshare
Environment Sensors Module For Raspberry Pi Pico, I2C Bus...
$57.60 AUD, inc GST
Flora Color Sensor with White Illumination LED - TCS34725
Brand: Adafruit
Your electronics can now see in dazzling color with this lovely color light sensor. Adafruit found the best color sensor on the market, the TCS34725, which has RGB and...
$13.80 AUD, inc GST
Arduino 9 Axis Motion Shield
Allow your Arduino to measure movement: orientation, acceleration and magnetic fields!
$69.30 AUD, inc GST
Sphero RVR+ Programmable Robot
Brand: Core Electronics
RVR+ is Sphero’s revolutionary take on the programmable robot and is optimised for the high school classrooms and Makerspaces
$479.95 AUD, inc GST
Adafruit HalloWing M0 Express
Brand: Adafruit
This is Hallowing..this is Hallowing... Hallowing! Hallowing! Are you the kind of person who doesn't like taking down the skeletons and spiders until after January?...
$60.70 AUD, inc GST
Zumo Shield for Arduino, v1.3
Brand: Pololu
This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis’s battery terminals and motors, and the Arduino plugs into the shield, face down. This shield includes dual motor drivers, a buzzer for playing simple sounds and music, a user pushbutton, and a 3-axis accelerometer, compass, and gyroscope. The shield boosts the battery voltage to power the Arduino, and it breaks out the Arduino I/O lines, reset button, and user LED for convenient access and to accommodate additional sensors for things like obstacle and edge detection.
$72.60 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.