WisBlock Meshtastic Starter Kit - 9xxMHz (RAK19003 Base Board)

SKU: RW-115093 Brand: RAKwireless

Build DIY customised off-grid LoRa mesh networks with high-gain rubber antennas and Nordic nRF52840 cores for reliable kilometre-range connectivity.

$43.60 AUD, inc GST
$39.64 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Fastest delivery: Tomorrow* Disclaimer:
For next-day delivery, the shipping address must be in the AusPost next-day network, eParcel Express must be selected, and the order must be placed before 2PM AEST Mon-Thurs excluding NSW Public Holidays. Orders may be delayed due to AusPost pickup timings and order verifications. eParcel Express is typically a 1-day service within the AusPost next-day network, though it is sometimes 2+ days.

Quantity Discounts:

  • 10+ $38.05 (exc GST)
  • 25+ $36.86 (exc GST)

Restrictions apply to this RF Equipment for use in Australia:

  • Only to be operated on 433Mhz / 915-930Mhz / 2.4Ghz  (check the product description for compatible frequency ranges).
  • If operating outside of shared frequencies or in such a way that is beyond low interference potential devices are intended to function, then you have obtained the appropriate authorisation to do so.

For use in other locations around the world:

  • Follow region-specific frequency spectrum rules.

A declaration of use will need to be submitted during checkout.

- +

18 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

Discover a versatile mesh networking platform with the upgraded Meshtastic Starter Kit, complete with a high-gain 2 dBi rubber antenna for extended range and reliable off-grid communication. Whether you’re prototyping IoT applications, teaching mesh networks in the lab or exploring DIY outdoor messaging, this all-in-one kit has you covered.

Technical Specifications

Parameter Specification
Core module RAK4631 Nordic nRF52840 (64 MHz Cortex-M4, 1 MB flash, 256 KB RAM), pre-flashed with Meshtastic firmware
Base board RAK19003: 30 x 35 mm, 2 empty sensor slots
Antenna 2 dBi rubber, SMA connector
Wireless LoRa sub-GHz (433/868/915 MHz)
Power input 3.3 V via WisBlock standard

Additional Resources

What’s Included

  • RAK4631 Nordic nRF52840 WisBlock Core Module, pre-flashed with Meshtastic firmware
  • 2 dBi rubber antenna
  • WisBlock base board - RAK19003

This product is listed in:

Wireless>Meshtastic

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

The Skeg Flexer - A Surfboard Fin Test Jig

This project started because I was laid up, unable to surf. It was something I’d been wanting...
This project started because I was laid up, unable to surf. It was something I’d been wanting...

The Snooze Logger - A Wearable Sleep Position Monitor

Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...
Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...

Spectral Animations with a DIY MSGEQ7 I2C Device

Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.