Search results for: 'drone'

TF-Luna is a single-point ranging LiDAR, based on the TOF (Time of Flight) principle. It is mainly used for stable, accurate and high-frame-rate range detection.

Bosch has been a leader in barometric pressure sensors, from the BMP085. BMP180, BMP280, BMP388... now Adafruit have got the next generation, the Adafruit BMP390 Precision Barometric Pressure and Altimeter Breakout. As you would expect, this sensor is similar to its earlier versions but even better. The BMP390 has better precision than ever, which makes it excellent for environmental sensing or as a precision altimeter. It can even be used in either I2C and SPI configurations.

The Pololu AltIMU-10 v5 is an inertial measurement unit (IMU) and altimeter that features the same LSM6DS33 gyro and accelerometer and LIS3MDL magnetometer as the MinIMU-9 v5, and adds an LPS25H digital barometer. An I²C interface accesses ten independent pressure, rotation, acceleration, and magnetic measurements that can be used to calculate the sensor’s altitude and absolute orientation

Is your favorite robot currently in a mid-life crisis? Does it need a new purpose or perhaps, direction? Well now you can find your way with the affordable and easy...

These coreless motors are just right for guys who love to DIY drone models! Designed to be high performance and easy to wire, the motor can work properly at only...

Get precise 20m distance sensing with the TFS20-L ToF LiDAR. This ultra-compact (1.35g) module offers exceptional sunlight resistance. Perfect for drones,...

These coreless motors are just right for guys who love to DIY drone models! Designed to be high performance and easy to wire, the motor can work properly at only...

These coreless motors are just right for guys who love to DIY drone models! Designed to be high performance and easy to wire, the motor can work properly at only...

Mid-range 25m TOF laser sensor for robotics, drones, industrial automation. ±3cm accuracy, 100Hz refresh rate, sunlight-resistant (100K LUX). UART/I2C/I/O...

These panels come to us from Voltaic Systems, makers of fine solar-powered bags and packs. These are waterproof, scratch-resistant, and UV resistant, and...

PGY TECH 110CM Landing Pad for Drones

Supports NTRIP and is capable of centimeter-level positioning accuracy.

This subtle filter offers increased exposure control and creates a dynamic blur effect to your images. Enjoy a better flight and create super smooth images.

Specially designed for Tello's propellers, these propeller guards help reduce the risk of damage or injury.

Provides up to five analog control channels and over ten customizable buttons, improving overall control efficiency.

Spare counter rotating propellers for the Crazyflie Nano Quadcopter. Specification Size: 45 mm Fits shaft: 0.8 mm Part List 4 x CW propeller 4 x CCW propeller...

Protect your Propellers and your RoboMaster TT with these slick propeller guards

Add a camera, a laser beam emitter, or even a remote cannon on your robots and drones! This is a useful FPV nylon Pan and Tilt for multiple uses. It is compatible with most 9~12g small servos. With this holder, you could easily mount camera or many other small modules on on the servo. The only limit? Your imagination.

The PGYTECH Mavic 2 Mini Carrying Case is a small, light, and convenient way to transport your drone, remote controller, and other small accessories.

The Tello Battery Charging Hub is designed for use with Tello Flight Batteries. It can accommodate up to three Tello Flight Batteries at the same time. The Tello Battery Charging Hub charges batteries in sequence according to their voltage levels, from highest to lowest.

CHAISNG M2 lithium battery, large capacity and swappable, can be independently charged unlimited expansion of underwater working hours.

Enterprise Shield was specially created to provide comprehensive protection for your DJI Enterprise products.

A tough and hardy case to protect your Mavic 2 Drone and its components.

Enterprise Shield was specially created to provide comprehensive protection for your DJI Enterprise products.

Carry your MAVIC 2 in style

CHASING Robot Arm is small and easy to install. The maximum drag force is 12 kg and the force is adjustable. It is suitable for multiple uses such as sampling detection.

The LPB40B LiDAR sensor based on DToF technology, is the ultimate collision avoidance solution for your vehicles and drones. Its high-speed measurement...

DJI Care Enterprise was specially created to provide comprehensive protection for your DJI Enterprise products. Offering coverage options with unlimited replacements or free repair services for accidental damage such as crashing, water damage, or signal interference. This efficient and total accident protection service provides greater peace of mind for your entire DJI fleet.

Designed for multi-rotor wings, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting...

Organize the drone, buoy, tether and charger, all in one place. The backpack includes a safety leash and a towel.

Capture up to 4K UHD media on this extremely durable and fast SD/MicroSD card at speeds up to 160MB/s. The perfect card for extended use with drones, cameras or phones.