Search results for: 'usb to dc adapter'

This is a DC 5.5mm*2.1mm female to USB Type-C male power adapter plug that can power your mobile phones, tablets, Raspberry Pi, and Lattepanda devices. Note: This...

This is a DC5.5mm*2.1mm female to USB Micro male power adapter plug that can power your mobile phones, tablets, Raspberry Pi, and LattePanda devices. Note: This...

This convenient adapter lets you plug a USB Type C 3.1 5V cable into something with a 5.5mm / 2.1mm DC barrel socket.Works great with any device or cable...

This convenient adapter lets you plug a USB Type C 3.1 5V cable into something with a 5.5mm / 2.1mm DC barrel socket.Works great with any device or cable...

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc), and it...

To make PoE to Micro USB and USB C devices more easily and conveniently accessible,

The UNIHIKER Carrier Board featuring a dual DC motor drive, RGB lights, infrared transmission and reception, and multiple power supply options (USB, DC...

As technology changes and adapts, so does Adafruit, and speaking of adapting, this adapter has a 2.1mm barrel jack socket and a USB C plug - you could use this to power a USB C device from a common wall adapter.

The premise of this MicroUSB Plug to 5.5/2.1mm Jack adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity...

Using a brand new 8-bit microprocessor from Microchip for the first time on an Arduino board. Explore the possibilities with the onboard IMU (Inertial Measurement Unit). Connect the board to your Wi-Fi network in a secure manner using the new ECC608 crypto chip accelerator.

This high-performance battery charger features USB charging allowing you to reload your batteries anytime, anywhere.

The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive...

This convenient adapter lets you plug a USB Type C 3.1 5V cable into something with a 5.5mm / 2.1mm DC barrel socket.Works great with any device or cable...

This convenient adapter lets you plug a USB Type C 3.1 5V cable into something with a 5.5mm / 2.1mm DC barrel socket.Works great with any device or cable...

EcoDuino is evolving. Now the EcoDuino has an enclosure. It is protected from water splashes, so it is safe to use beside your plants. The Ecoduino now sports an Atmega32U4 which eliminiates the requirement of an adapter. And sketches can simply uploaded via Mirco USB just like Arduino Leonado. Another improvment is that the DS18B20 sensor is now driectly supported.

The Arduino Uno SMD R3 is a microcontroller board based on the ATmega328 (datasheet).

This board is a member of DFRobot's Sunflower series - a family of boards focusing on high-efficiency solar power energy management for IoT or off-grid projects...

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with...

The HUSB238 USB PD sink chip is neat in that you can either use jumpers (really, resistor selection) to set the desired PD voltage and current or you can...

Most power banks will automatically turn off their USB ports when the power/current being drawn is lower than a certain value. This makes it impossible to...

This USB C PD to 2.1mm Cable with Selectable Voltage Button will help you get the most out of your USB C Power Delivery wall warts by letting you select...

Industrial Grade USB HUB, Extending 4x USB 2.0 Ports, Switchable Dual Hosts...

Transfer files and charge devices at up to 1.5A from each port.

Since the advent of micro:bit, its simple and practical way of programming is widely loved by makers, students and teachers. Its sample design, coupled with a wealth...

The Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with...

Industrial Grade Multifunctional USB HUB, Extending 3x USB ports + 100M Ethernet Port...

This is an industrial-grade USB to RS485 module with DC voltage output of up to 36V, which is applicable to industrial instruments that require...

These switchmode plugpack adaptors are slim in size, lightweight, and feature manually selectable variable voltage outputs. All are MEPS compliant and come supplied with 7 plugs and a USB output socket.

Similar to an Arduino UNO, can be recognized by computer as a mouse or keyboard.

The HUSB238 USB PD sink chip is neat in that you can either use switches (really, resistor selection) to set the desired PD voltage or use I2C for dynamic...

The GM73 code reader module is a high-performance code scanner that can capture common 1D and 2D codes like Barcode and QR on labels, papers or even...

The next generation of Raspberry Pi based KVM over IP. Manage your servers or PC remotely! PiKVM is a feature-rich, production grade, open-source, Raspberry Pi based KVM over IP device.

This unusual cable is sort of the 'ultimate' in USB type C Power Delivery (PD) hacking: good for experienced hardware hackers who are comfortable...

The PoE/ETH/USB HUB HAT is a PoE (Power over Ethernet) USB HUB HAT designed for Raspberry Pi Zero. By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable, along with 3x extended USB ports.

The Littlebits Steam Student Kit is here to provide the most engaging classroom experience possible. It contains modules of every kind which are sure to capture the imaginations of minds everywhere.

The compact NVIDIA Jetson Nano / Xavier NX carrier board provides multiple interfaces and NVIDIA JetPack support. Ideal for AI and IoT applications...